Design and Construction of Metrological Equipment for Torque Sensors with a Carbon-based Measuring Arm

[1] Wimmer, G., Schuecker, C., Pettermann, H. E. (2009). Numerical simulation of delaminationin laminated composite components - A combination of a strength criterion and fracture mechanics. Composites Part B: Engineering, 40 (2), 158-165. https://doi.org/10.1016/j.compositesb.2008.10.006 Search in Google Scholar

[2] Feng, D., Aymerich, F. (2014). Finite element modelling of damage induced by low-velocity impact on composite laminates. Composite Structures, 108, 161-171. https://doi.org/10.1016/j.compstruct.2013.09.004 Search in Google Scholar

[3] Petru, M., Syrovátková, M., Novotná, M. (2016). Crash test of carbon composites. Applied Mechanics and Materials, 821, 385-391. https://doi.org/10.4028/www.scientific.net/AMM.821.385 Search in Google Scholar

[4] Markovič, J., Živčák, J., Sága, M., Kliment, T., Král, Š. (2021). New generation of system for the metrological control of fuel dispensers. OIML Bulletin, 62 (3), 38-46. ISSN 0473-2812. Search in Google Scholar

[5] Serra, J., Bouvet, Ch., Castanié, B., Petiot, C. (2017). Experimental and numerical analysis of Carbon Fiber Reinforced Polymer notched coupons under tensile loading. Composite Structures, 181, 145-157. https://doi.org/10.1016/j.compstruct.2017.08.090 Search in Google Scholar

[6] Petru, M., Novák, O. (2017). FEM analysis of mechanical and structural properties of long fiber-reinforced composites. In Finite Element Method - Simulation, Numerical Analysis and Solution Techniques. Intechopen, ISBN 978-953-51-3849-5. https://doi.org/10.5772/intechopen.71881 Search in Google Scholar

[7] Hrček, S., Kohár, R., Steininger, J. (2021). Axial stiffness for large-scale ball slewing rings with four-point contact. Bulletin of the Polish Academy of Sciences: Technical Sciences, 69 (2), e136725. https://doi.org/10.24425/bpasts.2021.136725 Search in Google Scholar

[8] Brumerčík, F., Bašťovanský, R., Lukáč, M., Glowacz, A. (2021). Molybdenum strip test experiments and simulations at various temperatures to determine friction coefficients. Measurement, 172, 108859. https://doi.org/10.1016/j.measurement.2020.108859 Search in Google Scholar

[9] Markovič, J., Kučera, Ľ., Gajdošík, T., Frič, A. (2022). Method of static calibration of torque sensors and device for carrying out the method. Utility model, PÚV 19-2022. Search in Google Scholar

[10] Frič, A. (2022). Application of innovative solutions in ensuring the primary continuity of torque meters. Dissertation work. Search in Google Scholar