1. bookVolume 29 (2021): Issue 4 (December 2021)
Journal Details
License
Format
Journal
eISSN
2450-5781
First Published
30 Mar 2017
Publication timeframe
4 times per year
Languages
English
access type Open Access

Experimental Assessment if Changes in Structural Steel Composition by Progressive Technology Cutting

Published Online: 14 Dec 2021
Page range: 266 - 273
Journal Details
License
Format
Journal
eISSN
2450-5781
First Published
30 Mar 2017
Publication timeframe
4 times per year
Languages
English
Abstract

The submitted paper deals with the issue of change in structure, hardness and thermally affected zone of the samples of a toothed wheel part produced by technology of cutting by plasma, laser and water jet. The cutting process by laser and plasma technology causes intensive thermal affection of material and change in structure and microhardness in the cutting area referred to as thermally affected zone. The paper describes three material cutting technologies of the toothed wheel part. The experimental part contains description of experimental sample preparation, its hardness measurement and examination of structure along with further evaluation through graphs and photo documentation of structures.

Keywords

[1] Bicejova, L., Pavlenko, S., Mascenik, J.: Abrasive Granularity Impact on Water Jet Technology Head Vibrations During Cutting Steel, In: Applied Mechanics and Materials: ICMSMA 2013: International Conference on Mechatronic Systems and Materials Application: Guanghou, China, 26-27 June 2013. Vol. 389 (2013), pp. 304-309. ISBN 978-303785815-8. ISSN 1660-9336. Search in Google Scholar

[2] Bicejova, L., Pavlenko, S., Mascenik, J.: Measuring, processing and evaluating of technology head water jet vibration signal, In: Key Engineering Materials vol. 669: Operation and Diagnostics of Machines and Production Systems Operational States 3. Switzerland: TTP, 2016 pp. 205-211. ISBN 978-3-03835-629-5. ISSN 1013-9826.10.4028/www.scientific.net/KEM.669.205 Search in Google Scholar

[3] Bicejova, L., Pavlenko, S., Mascenik, J.: The Influence of Technology Head Shift Speed, Abrasive Kind and Granularity on Technology Head Vibration during Hard-to-Machine Material Cutting, In: Advanced Materials Research: ICMPMT 2014. Vol. 1061-1062 (2015), pp. 507-510. ISBN 978-3-03835-349-2. Search in Google Scholar

[4] Coranic, T., Gaspar, S., Pasko, J.: Structural modification impact analysis of selected components of shielding equipment using rapid prototyping technology, In: MM Science Journal. Vol. 2018, no. March (2018), pp. 2183-2187. ISSN 1803-1269. Search in Google Scholar

[5] Gaspar, S., Coranic, T., Pasko, J.: Influence of die casting factors and of hardening temperature upon mechanical properties of a die cast, In: MM Science Journal. Prague (Czech Republic): MM Publishing no. December (2018), pp. 2639-2642 [print, online]. ISSN 1803-1269. Search in Google Scholar

[6] Gaspar, S., Pasko, J.: Analysis of influence of pressing speed, of melt temperature and of casting position in a mold upon ultimate tensile strength Rm of die casting from aluminium, In: Advanced Materials Research: 2nd International Conference on Manufacturing 2014, February 9-10, 2014, Singapore. Vol. 909 (2014), pp. 3-7. ISBN 978-303835059-0. ISSN 1022-6680. Search in Google Scholar

[7] Jechj, J.: Heat treatment of steel. Brno, Czech Republic, 1983, 392 p. ISBN 04-408-83. Search in Google Scholar

[8] Krajny, Z.: Water Jet in practice. Bratislava, Slovakia, EPOS, 1998, ISBN 80-8057-091-4. Search in Google Scholar

[9] Krehel, R., Pavlenko, S., Mascenik, J.: Application and verification properties of the thermal process model, In: Key Engineering Materials vol. 669: Operation and Diagnostics of Machines and Production Systems Operational States 3. Switzerland: TTP, 2016 pp. 400-408. ISBN 978-3-03835-629-5. ISSN 1013-9826.10.4028/www.scientific.net/KEM.669.400 Search in Google Scholar

[10] Krenicky, T., Olejarova, S.: Manufacturing technologies: materials, operation and application, Zurich: Trans Tech Publications, 2017. 155 p. ISBN 978-3-0357-1196-7. Search in Google Scholar

[11] Krenicky, T., Servatka, M., Gaspar, S., Mascenik, J: Abrasive Water Jet Cutting of Hardox Steels-Quality Investigation, In: Processes. - Bazilej (Switzerland): Multidisciplinary Digital Publishing Institute, no. 8/12 (2020), pp. 1-12 [online]. ISSN 2227-9717. Search in Google Scholar

[12] Kuznetsov, E., Nahornyi, V., Krenicky, T.: Gas Flow Simulation in the Working Gap of Impulse Gas-Barrier Face Seal, In: Management Systems in Production Engineering. Warszawa (Poland): STE. Group, no. 28/4 (2020), pp. 298-303 [print, online]. ISSN 2299-0461. Search in Google Scholar

[13] Majernik, J., Gaspar, S., Gryc, K., Socha, L.: Changes in Eutectic Silumin Structure Depending on Gate Geometry and Its Effect on Mechanical Properties of Casting. Manufacturing technology, Ústí nad Labem: J.E. Purkyně university in Usti nad Labem, 2018, roč. 18, č. 3, pp. 439-443. ISSN 1213-2489. Search in Google Scholar

[14] Mascenik, J.: Design of a material cutting device with option of length adjustment of wooden cutting substance, In: MM Science Journal. Vol. 2017, no. December (2017), pp. 1919-1923. ISSN 1803-1269. Search in Google Scholar

[15] Mascenik, J.: Experimental determination of cutting speed influence on cutting surface character in material laser cutting, In: MM Science Journal. Vol. 2016, no. September (2016), pp. 960-963. ISSN 1803-1269. Search in Google Scholar

[16] Mascenik, J., Halko, J., Pavlenko, S.: Measurement of surface roughness of gears made by unconventional technologies, In: SBW 2009: Robotization and automation in welding and other techniques: 5. international scientific-professional conference: conference proceedings: Slavonski Brod, 11-13.11.2009. Slavonski Brod: Mechanical Engineering Faculty, 2009 P. 141-144. ISBN 978-953-6048-51-9. Search in Google Scholar

[17] Mascenik, J., Pavlenko, S., Bicejova, L.: Plasma gear manufacturing thermal aspects, In: Advanced Materials Research: ICMPMT 2014. Vol. 1061-1062 (2015), pp. 592-595. ISBN 978-3-03835-349-2. Search in Google Scholar

[18] Mascenik, J., Pavlenko, S.: Determination of stress and deformation during laser welding of aluminium alloys with the PC support, In: MM Science Journal. Prague (Česko): MM Publishing 2020, no. November (2020), pp. 4104-4107 [print, online]. ISSN 1803-1269. Search in Google Scholar

[19] Mascenik, J., Pavlenko, S.: Effective Use of Technology Flowdrill in Production Engineering, In: Advanced Materials Research: AMSE 2014. Vol. 1064 (2015), pp. 171-174. ISBN 978-3-03835-346-1. Search in Google Scholar

[20] Mascenik, J., Pavlenko, S.: Gear production using nonconventional technologies, In: Technika i technologii: innovacii i kačestvo. - Baranoviči: RIO, 2007 pp. 55-57. ISBN 9789854980928. Search in Google Scholar

[21] Olejarova, S., Krenicky, T.: Analysis of the effects of factors in relation to vibration of technological head during the splitting of construction steels through hydro-abrasive splitting, In: Key Engineering Materials vol. 669: Operation and Diagnostics of Machines and Production Systems Operational States 3. Switzerland: TTP, 2016 pp. 216-219. ISSN 1013-9826. Search in Google Scholar

[22] Simkulet, V., Mascenik, J., Mitalova, Z., Michalik, P.: Study of microstructural characteristic of ENS233J2G3 Steel after Plasma, Laser and WAJ cutting, In: Methods and means of machining materials: the work of the Center for Advanced Machining Methods. 2012. Presov: FVT TU, 2012 pp. 101-107. ISBN 978-80-553-1182-1. Search in Google Scholar

[23] Straka, L., Hasova, S.: Prediction of the heat-affected zone of tool steel EN X37CrMoV5-1 after die-sinking electrical discharge machining, In: Proceedings of the institution of mechanical engineers part B, Journal of engineering manufacture. Vol. 232, no. 8 (2018), pp. 1395-1406. ISSN 0954-4054. Search in Google Scholar

[24] https://www.machinemfg.com/laser-cutting-quality-control/ Search in Google Scholar

[25] https://www.jasic.co.uk/post/guide-to-plasma-cutting Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo