Evaluation of microstructural and mechanical qualities in optimised TIG-welded SDSS 2507 joints

[1] Yuan, Y., Yuan, S., Wang, Y., Li, Q, Deng, Z., Xie, Y., et al., Nanostructure, mechanical properties, and corrosion resistance of super duplex stainless steel 2507 aged at 500°C, Crystals, 2023, 13: 243 Yuan Y. Yuan S. Wang Y. Li Q Deng Z. Xie Y. Nanostructure, mechanical properties, and corrosion resistance of super duplex stainless steel 2507 aged at 500°C Crystals 2023 13 243 Search in Google Scholar

[2] Köse, C., Topal, C., Dissimilar laser beam welding of AISI 2507 super duplex stainless to AISI 317L austenitic stainless steel, Mater. Sci. Eng. A, 2023, 862: 144476 Köse C. Topal C. Dissimilar laser beam welding of AISI 2507 super duplex stainless to AISI 317L austenitic stainless steel Mater. Sci. Eng. A 2023 862 144476 Search in Google Scholar

[3] Wang, L., Ding, Y., Lu, Q., Guo, Z., Liu, Y., Cui, Z., Microstructure and corrosion behavior of welded joint between 2507 super duplex stainless steel and E690 low alloy steel, Corros. Commun., 2023, 11: 1–11 Wang L. Ding Y. Lu Q. Guo Z. Liu Y. Cui Z. Microstructure and corrosion behavior of welded joint between 2507 super duplex stainless steel and E690 low alloy steel Corros. Commun. 2023 11 1 11 Search in Google Scholar

[4] Roos, S., Botero, C., Rännar, L.E., Electron beam powder bed fusion processing of 2507 super duplex stainless steel. as-built phase composition and microstructural properties, J. Mater. Res. Technol., 2023, 24: 6473–6483 Roos S. Botero C. Rännar L.E. Electron beam powder bed fusion processing of 2507 super duplex stainless steel. as-built phase composition and microstructural properties J. Mater. Res. Technol. 2023 24 6473 6483 Search in Google Scholar

[5] Wang, Q., Gu, G., Jia, C., Li, K., Wu, C., Investigation of microstructure evolution, mechanical and corrosion properties of SAF 2507 super duplex stainless steel joints by keyhole plasma arc welding, J. Mater. Res. Technol., 2023, 22: 355–374 Wang Q. Gu G. Jia C. Li K. Wu C. Investigation of microstructure evolution, mechanical and corrosion properties of SAF 2507 super duplex stainless steel joints by keyhole plasma arc welding J. Mater. Res. Technol 2023 22 355 374 Search in Google Scholar

[6] Sekar, C.B., Koteswara Rao, S.R., Vijayan, S., Boopathy, S.R., Effect of welding processes on ferrite content, microstructure and mechanical properties of super duplex stainless steel 2507 welds, Mater. Test., 2023, 65(12): 1836–1844 Sekar C.B. Koteswara Rao S.R. Vijayan S. Boopathy S.R. Effect of welding processes on ferrite content, microstructure and mechanical properties of super duplex stainless steel 2507 welds Mater. Test. 2023 65 12 1836 1844 Search in Google Scholar

[7] Song, Q., Wang, H., Wang, W., Han, Z, Qian, Y., Wan, J., et al., Optimization of mechanical and surface properties of friction stir welded dissimilar joint of 2507 SDSS and 317L ASS by controlling process parameters, J. Mater. Res. Technol., 2024, 29: 416–426 Song Q. Wang H. Wang W. Han Z Qian Y. Wan J. Optimization of mechanical and surface properties of friction stir welded dissimilar joint of 2507 SDSS and 317L ASS by controlling process parameters J. Mater. Res. Technol. 2024 29 416 426 Search in Google Scholar

[8] Gupta, A., Kumar, A., Baskaran, T., Arya, S.B., Khatirkar, R.K., Effect of heat input on microstructure and corrosion behavior of duplex stainless steel shielded metal arc welds. Trans. Indian. Inst. Met., 2018, 71(7): 1595–1606 Gupta A. Kumar A. Baskaran T. Arya S.B. Khatirkar R.K. Effect of heat input on microstructure and corrosion behavior of duplex stainless steel shielded metal arc welds Trans. Indian. Inst. Met. 2018 71 7 1595 1606 Search in Google Scholar

[9] Lange, A., Influence of flame straightening on the properties of welded joints made of X2CrNi22-2 duplex steel, Mater. Sci. Pol., 2021, 39: 446–457 Lange A. Influence of flame straightening on the properties of welded joints made of X2CrNi22-2 duplex steel Mater. Sci. Pol 2021 39 446 457 Search in Google Scholar

[10] Maurya, A.K., Chhibber, R., Pandey, C., GTAW dissimilar weldment of sDSS 2507 and nickel alloy for marine applications: microstructure–mechanical integrity, Metall. Mater. Trans. A., 2023, 54(8): 3311–3340 Maurya A.K. Chhibber R. Pandey C. GTAW dissimilar weldment of sDSS 2507 and nickel alloy for marine applications: microstructure–mechanical integrity Metall. Mater. Trans. A. 2023 54 8 3311 3340 Search in Google Scholar

[11] El Sayed Seleman, M.M., Alateyah, A.I., Mahmoud, E.A.E., Elsoeudy, R.I., Ahmed, M.M.Z., Hafez, K.M., et al., Friction stir welding of 2507 super-duplex stainless steel: feasibility of butt joint groove filling at different process parameters, Adv. Mater. Process., 2024, 10(4): 40–64 El Sayed Seleman M.M. Alateyah A.I. Mahmoud E.A.E. Elsoeudy R.I. Ahmed M.M.Z. Hafez K.M. Friction stir welding of 2507 super-duplex stainless steel: feasibility of butt joint groove filling at different process parameters Adv. Mater. Process. 2024 10 4 40 64 Search in Google Scholar

[12] Kumar, S., Yogesh, K., Vimal, K.E.K., Microstructural and corrosion behavior of thin sheet of stainless steel-grade super duplex 2507 by gas tungsten arc welding, SAE Int. J. Mater. Manuf., 2024, 17(2): 9 Kumar S. Yogesh K. Vimal K.E.K. Microstructural and corrosion behavior of thin sheet of stainless steel-grade super duplex 2507 by gas tungsten arc welding SAE Int. J. Mater. Manuf. 2024 17 2 9 Search in Google Scholar

[13] Cojocaru, E.M., Raducanu, D., Vintilam, A.N., Alturaihi, S.S, Serban, N., Berbecaru, A.C., et al., Influence of ageing treatment on microstructural and mechanical properties of a solution treated UNS S32750/EN 1.4410/F53 Super Duplex Stainless Steel (SDSS) alloy, J. Mater. Res. Technol., 2020, 9(4): 8592–8605 Cojocaru E.M. Raducanu D. Vintilam A.N. Alturaihi S.S Serban N. Berbecaru A.C. Influence of ageing treatment on microstructural and mechanical properties of a solution treated UNS S32750/EN 1.4410/F53 Super Duplex Stainless Steel (SDSS) alloy J. Mater. Res. Technol. 2020 9 4 8592 8605 Search in Google Scholar

[14] Brum Walter, N.M., Braga Lemos, G.V., Kieckow, G.S., Buzzatti, D.T., Buzzatti, J.T., Mattei, F., et al., Investigating microstructure, mechanical properties, and pitting corrosion resistance of UNS S32760 super duplex stainless steel after linear friction welding, J. Mater. Res. Technol., 2024, 31: 1637–1643 Brum Walter N.M. Braga Lemos G.V. Kieckow G.S. Buzzatti D.T. Buzzatti J.T. Mattei F. Investigating microstructure, mechanical properties, and pitting corrosion resistance of UNS S32760 super duplex stainless steel after linear friction welding J. Mater. Res. Technol. 2024 31 1637 1643 Search in Google Scholar

[15] Maurya, A.K., Kumar, N., Pandey, C., Chhibber, R., Structure–property relationship assessment of dissimilar gas tungsten arc welded joint of pipeline steel and super duplex stainless steel for marine applications, Arch. Civ. Mech. Eng., 2024, 24(3): 164 Maurya A.K. Kumar N. Pandey C. Chhibber R. Structure–property relationship assessment of dissimilar gas tungsten arc welded joint of pipeline steel and super duplex stainless steel for marine applications Arch. Civ. Mech. Eng. 2024 24 3 164 Search in Google Scholar

[16] Giorjão, R.A.R., Pereira, V.F., Terada, M., da Fonseca, E.B., Marinho, R.R., Garcia, D.M., et al., Microstructure and mechanical properties of friction stir welded 8mm pipe SAF 2507 super duplex stainless steel, J. Mater. Res. Technol., 2019, 8(1): 243–249 Giorjão R.A.R. Pereira V.F. Terada M. da Fonseca E.B. Marinho R.R. Garcia D.M. Microstructure and mechanical properties of friction stir welded 8mm pipe SAF 2507 super duplex stainless steel J. Mater. Res. Technol. 2019 8 1 243 249 Search in Google Scholar

[17] Maurya, A.K., Patnaik, A., Pandey, S.M., Chhibber, R., Pandey, C., Tribological performance of gas tungsten arc welded dissimilar joints of sDSS 2507/N50 steel, J. Mater. Eng. Perform., 2023, 33: 10280–10294 Maurya A.K. Patnaik A. Pandey S.M. Chhibber R. Pandey C. Tribological performance of gas tungsten arc welded dissimilar joints of sDSS 2507/N50 steel J. Mater. Eng. Perform. 2023 33 10280 10294 Search in Google Scholar

[18] Abbasi, M., Tahaei, A., Vanani, B.B., Post-weld heat treatment and Nitrogen application in welding of super duplex stainless steels, In: Advances in Manufacturing for Aerospace Alloys, S. Gürgen, Springer Nature Switzerland, Cham, 2024, pp. 117–134 Abbasi M. Tahaei A. Vanani B.B. Post-weld heat treatment and Nitrogen application in welding of super duplex stainless steels In: Advances in Manufacturing for Aerospace Alloys, S. Gürgen Springer Nature Switzerland Cham 2024 pp. 117 134 Search in Google Scholar

[19] Silva, D., Barbosa, E., Pardal, J.M., Barbosa, C., Tavares, S.S.M., Microstructural characterization of aged welded joints of a UNS S32750 superduplex stainless steel metallogr, Microstruct. Anal., 2024, 13: 570–581 Silva D. Barbosa E. Pardal J.M. Barbosa C. Tavares S.S.M. Microstructural characterization of aged welded joints of a UNS S32750 superduplex stainless steel metallogr Microstruct. Anal. 2024 13 570 581 Search in Google Scholar

[20] Fande, A., Kalbande, V., Kavishwar, S., Tandon, V., Dhunde, A., Enhancing microstructure and mechanical properties of dissimilar TIG welded duplex 2205 and Ni-based inconel 718 superalloy through post weld heat treatment, Eng. Res. Express., 2024, 6(2): 025539 Fande A. Kalbande V. Kavishwar S. Tandon V. Dhunde A. Enhancing microstructure and mechanical properties of dissimilar TIG welded duplex 2205 and Ni-based inconel 718 superalloy through post weld heat treatment Eng. Res. Express 2024 6 2 025539 Search in Google Scholar

[21] Acuna, A., Riffel, K.C., Ramirez, A., Effect of sigma phase on CVN impact toughness in HDSS weld metal, Mater. Sci. Eng. A., 2024, 912: 146948 Acuna A. Riffel K.C. Ramirez A. Effect of sigma phase on CVN impact toughness in HDSS weld metal Mater. Sci. Eng. A. 2024 912 146948 Search in Google Scholar

[22] Kumar, S., Vimal, K.E.K., Numerical and experimental studies of thin super duplex stainless steel GTAW joints, Int. J. Mater. Eng. Innov., 2024, 15(2): 157–171 Kumar S. Vimal K.E.K. Numerical and experimental studies of thin super duplex stainless steel GTAW joints Int. J. Mater. Eng. Innov. 2024 15 2 157 171 Search in Google Scholar

[23] Kumar, N., Kumar, P., Investigation on microstructural and mechanical integrity of GTAW dissimilar welded joint of IN 718/ASS 304L using Ni-based filler IN 625 using EBSD and DHD techniques, Int. J. Press. Vessel. Pip.; 2024, 209: 105213 Kumar N. Kumar P. Investigation on microstructural and mechanical integrity of GTAW dissimilar welded joint of IN 718/ASS 304L using Ni-based filler IN 625 using EBSD and DHD techniques Int. J. Press. Vessel. Pip 2024 209 105213 Search in Google Scholar

[24] Abbasi, M., Vanani, B.B., Tahaei, A., Garagnani, G.L., Influence of Ni and PWHT on microstructure evolution and mechanical properties of GTA-welded duplex stainless steel and super duplex stainless steel joints: A comparative investigation, Proc. Inst. Mech. Eng. Pt. L J. Mater. Des. Appl., 2024, 238(10): 14644207241236743 Abbasi M. Vanani B.B. Tahaei A. Garagnani G.L. Influence of Ni and PWHT on microstructure evolution and mechanical properties of GTA-welded duplex stainless steel and super duplex stainless steel joints: A comparative investigation Proc. Inst. Mech. Eng. Pt. L J. Mater. Des. Appl. 2024 238 10 14644207241236743 Search in Google Scholar

[25] Tabrizi, T.R, Sabzi, M., Anijdan, S.M., Eivani, A.R., Park, N., Jafarian, H.R., Comparing the effect of continuous and pulsed current in the GTAW process of AISI 316L stainless steel welded joint: microstructural evolution, phase equilibrium, mechanical properties and fracture mode, J. Mater. Res. Technol., 2021, 15: 199–212 Tabrizi T.R Sabzi M. Anijdan S.M. Eivani A.R. Park N. Jafarian H.R. Comparing the effect of continuous and pulsed current in the GTAW process of AISI 316L stainless steel welded joint: microstructural evolution, phase equilibrium, mechanical properties and fracture mode J. Mater. Res. Technol. 2021 15 199 212 Search in Google Scholar

[26] Ramkumar, K.D., Mishra, D., Ganesh Raj, B., Vignesh, M.K., Thiruvengatam, G., Sudharshan, S.P., et al., Effect of optimal weld parameters in the microstructure and mechanical properties of autogeneous gas tungsten arc weldments of super-duplex stainless steel UNS S32750, Mater. Des., 2015, 66: 356–365 Ramkumar K.D. Mishra D. Ganesh Raj B. Vignesh M.K. Thiruvengatam G. Sudharshan S.P. Effect of optimal weld parameters in the microstructure and mechanical properties of autogeneous gas tungsten arc weldments of super-duplex stainless steel UNS S32750 Mater. Des. 2015 66 356 365 Search in Google Scholar

[27] Vahman, M., Shamanian, M., Golozar, M.A., Jalali, A., Sarmadi, M.A., Kangazian, J., The effect of welding heat input on the structure–property relationship of a new grade super duplex stainless steel, Steel Res. Int., 2020, 91(1): 1900347 Vahman M. Shamanian M. Golozar M.A. Jalali A. Sarmadi M.A. Kangazian J. The effect of welding heat input on the structure–property relationship of a new grade super duplex stainless steel Steel Res. Int. 2020 91 1 1900347 Search in Google Scholar

[28] Srinivasan, S., Atrens, A., Effect of pulse gas tungsten arc welding on the metallurgical characteristics & microstructural evolution in AZ31B magnesium alloy welds, J. Mater. Res. Technol., 2024, 29: 295412–295424 Srinivasan S. Atrens A. Effect of pulse gas tungsten arc welding on the metallurgical characteristics & microstructural evolution in AZ31B magnesium alloy welds J. Mater. Res. Technol. 2024 29 295412 295424 Search in Google Scholar

[29] Shin, Y.T., Shin, H.S., Lee, H.W., Effects of heat input on pitting corrosion in super duplex stainless steel weld metals, Met. Mater. Int., 2012, 18(6): 1037–1040 Shin Y.T. Shin H.S. Lee H.W. Effects of heat input on pitting corrosion in super duplex stainless steel weld metals Met. Mater. Int. 2012 18 6 1037 1040 Search in Google Scholar

[30] Kordatos, J.D., Fourlaris, G., Papadimitriou, G., The effect of cooling rate on the mechanical and corrosion properties of SAF 2205 (UNS 31803) duplex stainless steel welds, Scr. Mater., 2001, 44(3): 401–408 Kordatos J.D. Fourlaris G. Papadimitriou G. The effect of cooling rate on the mechanical and corrosion properties of SAF 2205 (UNS 31803) duplex stainless steel welds Scr. Mater. 2001 44 3 401 408 Search in Google Scholar

[31] Tavares, S.S.M., Pardal, J.M., Lima, L.D., Bastos, I.N., Nascimento, A.M., Souzam, J.A., Characterization of microstructure, chemical composition, corrosion resistance and toughness of a multipass weld joint of superduplex stainless steel UNS S32750, Mater. Charact., 2007, 58(7): 610–616 Tavares S.S.M. Pardal J.M. Lima L.D. Bastos I.N. Nascimento A.M. Souzam J.A. , Characterization of microstructure, chemical composition, corrosion resistance and toughness of a multipass weld joint of superduplex stainless steel UNS S32750 Mater. Charact. 2007 58 7 610 616 Search in Google Scholar

[32] Yousefieh, M., Shamanian, M., Saatchi, A., Optimization of the pulsed current gas tungsten arc welding (PCGTAW) parameters for corrosion resistance of super duplex stainless steel (UNS S32760) welds using the Taguchi method, J. Alloy. Compd., 2011, 509(3): 782–788 Yousefieh M. Shamanian M. Saatchi A. Optimization of the pulsed current gas tungsten arc welding (PCGTAW) parameters for corrosion resistance of super duplex stainless steel (UNS S32760) welds using the Taguchi method J. Alloy. Compd. 2011 509 3 782 788 Search in Google Scholar

[33] Srirangan, A.K., Paulraj, S., Multi-response optimization of process parameters for TIG welding of Incoloy 800HT by Taguchi grey relational analysis, Eng. Sci. Technol. Int. J., 2016, 19(2): 811–817 Srirangan A.K. Paulraj S. Multi-response optimization of process parameters for TIG welding of Incoloy 800HT by Taguchi grey relational analysis Eng. Sci. Technol. Int. J. 2016 19 2 811 817 Search in Google Scholar

[34] Magudeeswaran, G., Nair, S.R., Sundar, L., Harikannan, N., Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds, Def. Technol., 2014, 10(3): 251–260 Magudeeswaran G. Nair S.R. Sundar L. Harikannan N. Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds Def. Technol. 2014 10 3 251 260 Search in Google Scholar

[35] Madugula, N.S., Kumar, Y., Vimal, K.E.K., Kumar, S., Benchmarking the quality improvement strategies of wire arc additive manufacturing process using fuzzy QFD approach, Rapid Prototyp. J., 2024, 30(5): 876–884 Madugula N.S. Kumar Y. Vimal K.E.K. Kumar S. Benchmarking the quality improvement strategies of wire arc additive manufacturing process using fuzzy QFD approach Rapid Prototyp. J 2024 30 5 876 884 Search in Google Scholar

[36] Kumar, S., Vimal, K.E.K., Karpagaraj, A., Mechanical characterization and simulation of PCGTAW welded thin sheet of SDSS material, Mater. Today: Proc., 2022, 60: 452–458 Kumar S. Vimal K.E.K. Karpagaraj A. Mechanical characterization and simulation of PCGTAW welded thin sheet of SDSS material Mater. Today: Proc. 2022 60 452 458 Search in Google Scholar

[37] Kumar, S., Madugula, N.S., Kumar, R., Kumar, N., Giri, J., Kanan, M., An extensive analysis of GTAW process and its influence on the microstructure and mechanical properties of SDSS 2507, J. Mater. Res. Technol., 2024, 33: 8675–8686 Kumar S. Madugula N.S. Kumar R. Kumar N. Giri J. Kanan M. An extensive analysis of GTAW process and its influence on the microstructure and mechanical properties of SDSS 2507 J. Mater. Res. Technol 2024 33 8675 8686 Search in Google Scholar

[38] Sordetti, F., Palombi, A., Varone, A., Picco, N., Magnan, M., Marin, E., et al., Experimental review and accuracy of etchants used for phase analysis of SAF2507 Super Duplex Stainless Steel, J. Mater. Res. Technol., 2024, 32: 3842–3856 Sordetti F. Palombi A. Varone A. Picco N. Magnan M. Marin E. Experimental review and accuracy of etchants used for phase analysis of SAF2507 Super Duplex Stainless Steel J. Mater. Res. Technol. 2024 32 3842 3856 Search in Google Scholar

[39] Çetinarslan, C.S., Sahin, M., Karaman Genç, S., Sevil, C., Mechanical and metallurgical properties of ion-nitrided austenitic-stainless steel welds, Mater. Sci. Pol., 2012, 30: 303–312 Çetinarslan C.S. Sahin M. Karaman Genç S. Sevil C. Mechanical and metallurgical properties of ion-nitrided austenitic-stainless steel welds Mater. Sci. Pol. 2012 30 303 312 Search in Google Scholar

[40] Yelamasetti, B.G., Vardhan, V., Optimization of GTAW parameters for the development of dissimilar AA5052 and AA6061 joints, Mater. Today Proc., 2021, 47: 4350–4356 Yelamasetti B.G. Vardhan V. Optimization of GTAW parameters for the development of dissimilar AA5052 and AA6061 joints Mater. Today Proc. 2021 47 4350 4356 Search in Google Scholar

[41] Kumar, S., Vimal, K.E.K., Khan, M.A., Kumar, Y., A hybrid learning approach for modelling the fabrication of super duplex stainless steel thin joints using GTAW process. Int. J. Interact. Des. Manuf., 2024, 18(5): 3001–3014 Kumar S. Vimal K.E.K. Khan M.A. Kumar Y. A hybrid learning approach for modelling the fabrication of super duplex stainless steel thin joints using GTAW process Int. J. Interact. Des. Manuf. 2024 18 5 3001 3014 Search in Google Scholar