This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Kalpakjian S, Rajagopal S. Spinning of tubes: a review. JApMw. 1982;2(3):211-23. doi: 10.1007/BF02834039KalpakjianSRajagopalS.Spinning of tubes: a review. JApMw.1982;2(3):211-23. doi: 10.1007/BF02834039Open DOISearch in Google Scholar
Kocabiçak AC, Karakaķ A, Aydin G, Yalçinkaya S. Investigation of flow forming process and heat treatment effects on 2024 aluminium tubes. In: Lecture notes in mechanical engineering. Berlin: Springer Science and Business Media Deutschland GmbH; 2021. p. 129-38. doi: 10.1007/978-981-15-9893-7_8KocabiçakACKarakaķAAydinGYalçinkayaS.Investigation of flow forming process and heat treatment effects on 2024 aluminium tubes. In: Lecture notes in mechanical engineering.Berlin: Springer Science and Business Media Deutschland GmbH; 2021. p. 129-38. doi: 10.1007/978-981-15-9893-7_8Open DOISearch in Google Scholar
Chang SC, Huang CA, Yu SY, Chang Y, Han WC, Shieh TS, et al. Tube spinnability of AA 2024 and 7075 aluminum alloys. J Mater Process Technol. 1998;80-1: 676-82. doi: 10.1016/S0924-0136(98)00174-5ChangSCHuangCAYuSYChangYHanWCShiehTSTube spinnability of AA 2024 and 7075 aluminum alloys. J Mater Process Technol.1998;80-1: 676-82. doi: 10.1016/S0924-0136(98)00174-5Open DOISearch in Google Scholar
Gao PFF, Ren ZPP, Zhan M, Xing L. Tailoring of the microstructure and mechanical properties of the flow formed aluminum alloy sheet. J Alloys Compd. 2022;928. doi: 10.1016/j.jallcom.2022.167139GaoPFFRenZPPZhanMXingL.Tailoring of the microstructure and mechanical properties of the flow formed aluminum alloy sheet. J Alloys Compd.2022;928. doi: 10.1016/j.jallcom.2022.167139Open DOISearch in Google Scholar
Günay E, Fenercioglu TO, Yalçinkaya T. Numerical analysis of thermo-mechanical behavior in flow forming. Procedia Struct Integr. 2022;35(C):42-50. doi: 10.1016/j.prostr.2021.12.046GünayEFenerciogluTOYalçinkayaT.Numerical analysis of thermo-mechanical behavior in flow forming. Procedia Struct Integr.2022;35(C):42-50. doi: 10.1016/j.prostr.2021.12.046Open DOISearch in Google Scholar
Singh AK, Narasimhan K, Singh R. Finite element modeling of backward flow forming of Ti6Al4V alloy. Mater Today Proc. 2018;5(11):24963-70. doi: 10.1016/j.matpr.2018.10.297SinghAKNarasimhanKSinghR.Finite element modeling of backward flow forming of Ti6Al4V alloy. Mater Today Proc.2018;5(11):24963-70. doi: 10.1016/j.matpr.2018.10.297Open DOISearch in Google Scholar
Marini D, Cunningham D, Xirouchakis P, Corney JR. Flow forming: a review of research methodologies, prediction models and their applications. Int J Mech Eng Technol. 2016;7(5):285-315.MariniDCunninghamDXirouchakisPCorneyJR.Flow forming: a review of research methodologies, prediction models and their applications. Int J Mech Eng Technol.2016;7(5):285-315.Search in Google Scholar
Hayama M, Kudo H. Analysis of diametral growth and working forces in tube spinning. Jpn Soc Mech Eng. 1979;22(167):776-84.HayamaMKudoH.Analysis of diametral growth and working forces in tube spinning. Jpn Soc Mech Eng.1979;22(167):776-84.Search in Google Scholar
Greditor MA. Davil’nye raboty i rotacionnoe vydavli-vanie (Spinning Operations and Rotary Extrusion). Moscow, USSR: Mašinostroenie; 1971.GreditorMA.Davil’nye raboty i rotacionnoe vydavli-vanie (Spinning Operations and Rotary Extrusion). Moscow, USSR: Mašinostroenie; 1971.Search in Google Scholar
Mallanna C, Nagarajan HN, Visveswaran ME. Process parameters in flow forming (drawing type tube spinning) and how they affect the end product. In: Proceedings of the International Conference on Rotary Metalwork Process, 1st. Linköping, Sweden: IFS (Publ) Ltd; 1979. p. 229-42.MallannaCNagarajanHNVisveswaranME.Process parameters in flow forming (drawing type tube spinning) and how they affect the end product. In: Proceedings of the International Conference on Rotary Metalwork Process, 1st. Linköping, Sweden: IFS (Publ) Ltd; 1979. p. 229-42.Search in Google Scholar
Davidson MJ, Balasubramanian K, Tagore GRN. Experimental investigation on flow-forming of AA6061 alloy—A Taguchi approach. J Mater Process Technol. 2008;200(1-3):283-7. doi: 10.1016/j.jmatprotec.2007. 09.026DavidsonMJBalasubramanianKTagoreGRN.Experimental investigation on flow-forming of AA6061 alloy—A Taguchi approach. J Mater Process Technol.2008;200(1-3):283-7. doi: 10.1016/j.jmatprotec.2007.09.026Open DOISearch in Google Scholar
Haghshenas M, Wood JT, Klassen RJ. Investigation of strain-hardening rate on splined mandrel flow forming of 5052 and 6061 aluminum alloys. Mater Sci Eng: A. 2012;532:287-94. doi: 10.1016/j.msea.2011.10.094HaghshenasMWoodJTKlassenRJ.Investigation of strain-hardening rate on splined mandrel flow forming of 5052 and 6061 aluminum alloys. Mater Sci Eng: A.2012;532:287-94. doi: 10.1016/j.msea.2011.10.094Open DOISearch in Google Scholar
Molladavoudi HR, Djavanroodi F. Experimental study of thickness reduction effects on mechanical properties and spinning accuracy of aluminum 7075-O, during flow forming. Int J Adv Manuf Technol. 2011;52(9-12):949-57. doi: 10.1007/s00170-010-2782-4MolladavoudiHRDjavanroodiF.Experimental study of thickness reduction effects on mechanical properties and spinning accuracy of aluminum 7075-O, during flow forming. Int J Adv Manuf Technol.2011;52(9-12):949-57. doi: 10.1007/s00170-010-2782-4Open DOISearch in Google Scholar
Srinivasulu M, Komaraiah M, Krishna CSRP. Experimental studies on the characteristics of AA6082 flow formed tubes. J Mechan Eng Res. 2012;4(6):192-8. doi: 10.5897/JMER11.063SrinivasuluMKomaraiahMKrishnaCSRP.Experimental studies on the characteristics of AA6082 flow formed tubes. J Mechan Eng Res.2012;4(6):192-8. doi: 10.5897/JMER11.063Open DOISearch in Google Scholar
Venkateshwarlu G, Ramesh Kumar K, JanardhanReddy TA. Experimental study of flow forming process parameters on thickness variation of aluminum alloy AA6061 tubes. Int J Latest Res Eng Technol (also: IJLRET). 2016;2(10):33-40.VenkateshwarluGRamesh KumarKJanardhanReddyTA.Experimental study of flow forming process parameters on thickness variation of aluminum alloy AA6061 tubes. Int J Latest Res Eng Technol (also: IJLRET).2016;2(10):33-40.Search in Google Scholar
Abedini A, Rash Ahmadi S, Doniavi A. Roughness optimization of flow-formed tubes using the Taguchi method. Int J Adv Manuf Tech. 2014;72(5-8):1009-19. doi: 10.1007/s00170-014-5732-8AbediniARash AhmadiSDoniaviA.Roughness optimization of flow-formed tubes using the Taguchi method. Int J Adv Manuf Tech.2014;72(5-8):1009-19. doi: 10.1007/s00170-014-5732-8Open DOISearch in Google Scholar
Wang X, Xia Q, Cheng X, Xiao G. A study on non-uniform deformation of backward flow forming and its influencing factors. Int J Adv Manuf Tech-nol. 2017;93(9-12):4143-52. doi: 10.1007/s00170-017-0727-xWangXXiaQChengXXiaoG.A study on non-uniform deformation of backward flow forming and its influencing factors. Int J Adv Manuf Tech-nol.2017;93(9-12):4143-52. doi: 10.1007/s00170-017-0727-xOpen DOISearch in Google Scholar
Gadek T, Nowacki Ł, Majewski M, Jurczak H. Bending tests of aluminum profiles used in the transport industry. Metal Forming. 2018;29(3):299-314.GadekTNowackiŁMajewskiMJurczakH.Bending tests of aluminum profiles used in the transport industry. Metal Forming.2018;29(3):299-314.Search in Google Scholar
Gadek T, Majewski M, Drenger T, Nowacki Ł. Review of research on sheet forming within the framework of realized projects of the Łukasiewicz Research Network-Metal Forming Institute. Met Form. 2019;30(3): 213-26.GadekTMajewskiMDrengerTNowackiŁ.Review of research on sheet forming within the framework of realized projects of the Łukasiewicz Research Network-Metal Forming Institute. Met Form.2019;30(3): 213-26.Search in Google Scholar
Mohebbi MS, Akbarzadeh A. Experimental study and FEM analysis of redundant strains in flow forming of tubes. J Mater Process Technol. 2010;210:389-95. doi: 10.1016/j.jmatprotec.2009.09.028MohebbiMSAkbarzadehA.Experimental study and FEM analysis of redundant strains in flow forming of tubes. J Mater Process Technol.2010;210:389-95. doi: 10.1016/j.jmatprotec.2009.09.028Open DOISearch in Google Scholar
Murata M, Kuboki T, Murai T. Compression spinning of circular magnesium tube using heated roller tool. J Mater Process Technol. 2005;162:540-5. doi: 10.1016/j.jmatprotec.2005.02.199MurataMKubokiTMuraiT.Compression spinning of circular magnesium tube using heated roller tool. J Mater Process Technol.2005;162:540-5. doi: 10.1016/j.jmatprotec.2005.02.199Open DOISearch in Google Scholar
Chen RY, Chu HY, Lai CC, Wu CT. Effects of annealing temperature on the mechanical properties and sensitization of 5083-H116 aluminum alloy. Proceedings of the Institution of Mechanical Engineers, Part L: J Mater Des Appl. 2015;229(4):339-46. doi: 10.1177/1464420713512249ChenRYChuHYLaiCCWuCT.Effects of annealing temperature on the mechanical properties and sensitization of 5083-H116 aluminum alloy. Proceedings of the Institution of Mechanical Engineers, Part L: J Mater Des Appl.2015;229(4):339-46. doi: 10.1177/1464420713512249Open DOISearch in Google Scholar