This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Mehta J, Mittal VK, Gupta P. Role of thermal spray coatings on wear, erosion and corrosion behavior: a review. J Appl Sci Eng. 2017;20(4):445–452. https://doi.org/10.6180/jase.2017.20.4.05MehtaJMittalVKGuptaPRole of thermal spray coatings on wear, erosion and corrosion behavior: a review2017204445452https://doi.org/10.6180/jase.2017.20.4.05Search in Google Scholar
Lisiecki A. Tribology and surface engineering. Coatings. 2019;9(10):663. https://doi.org/10.3390/coatings9100663LisieckiATribology and surface engineering2019910663https://doi.org/10.3390/coatings9100663Search in Google Scholar
Ostovan F, Hasanzadeh E, Toozandehjani M, Shafiei E, Jamaluddin KR, Amrin A. Microstructure, hardness and corrosion behavior of gas tungsten arc welding clad inconel 625 super alloy over A517 carbon steel using ERNiCrMo3 filler metal. J Mater Eng Perform. 2020;29:6919–6930. https://doi.org/10.1007/s11665-020-05178-xOstovanFHasanzadehEToozandehjaniMShafieiEJamaluddinKRAmrinAMicrostructure, hardness and corrosion behavior of gas tungsten arc welding clad inconel 625 super alloy over A517 carbon steel using ERNiCrMo3 filler metal20202969196930https://doi.org/10.1007/s11665-020-05178-xSearch in Google Scholar
Jamrozik W, Górka J, Wyględacz B, Kiel-Jamrozik M. FEM-based thermogram correction for Inconel 625 joint hardness clustering. Materials. 2022;15(3):1113. https://doi.org/10.3390/ma15031113JamrozikWGórkaJWyględaczBKiel-JamrozikMFEM-based thermogram correction for Inconel 625 joint hardness clustering20221531113https://doi.org/10.3390/ma15031113Search in Google Scholar
Scendo M, Staszewska-Samson K, Danielewski H. Corrosion behavior of Inconel 625 coating produced by laser cladding. Coatings. 2021;11(7):759. https://doi.org/10.3390/coatings11070759ScendoMStaszewska-SamsonKDanielewskiHCorrosion behavior of Inconel 625 coating produced by laser cladding2021117759https://doi.org/10.3390/coatings11070759Search in Google Scholar
Czupryński A, Żuk M. Matrix composite coatings deposited on AISI 4715 steel by powder plasma-transferred arc welding. Materials. 2021;14(20):6066. https://doi.org/10.3390/ma14206066CzupryńskiAŻukMMatrix composite coatings deposited on AISI 4715 steel by powder plasma-transferred arc welding202114206066https://doi.org/10.3390/ma14206066Search in Google Scholar
Lont A, Górka J, Janicki D, Matus K. The laser alloying process of ductile cast iron surface with titanium powder in nitrogen atmosphere. Coatings. 2022;12(2):227. https://doi.org/10.3390/coatings12020227LontAGórkaJJanickiDMatusKThe laser alloying process of ductile cast iron surface with titanium powder in nitrogen atmosphere2022122227https://doi.org/10.3390/coatings12020227Search in Google Scholar
Abioye TE, McCartney DG, Clare AT. Laser cladding of Inconel 625 wire for corrosion protection. J Mater Process Technol. 2015;217:232–40. https://doi.org/10.1016/j.jmatprotec.2014.10.024AbioyeTEMcCartneyDGClareATLaser cladding of Inconel 625 wire for corrosion protection201521723240https://doi.org/10.1016/j.jmatprotec.2014.10.024Search in Google Scholar
Janicki D, Musztyfaga-Staszuk M. Direct diode laser cladding of Inconel 625/WC composite coatings. J Mech Eng. 2016;62:363–72. https://doi.org/10.5545/sv-jme.2015.3194JanickiDMusztyfaga-StaszukMDirect diode laser cladding of Inconel 625/WC composite coatings20166236372https://doi.org/10.5545/sv-jme.2015.3194Search in Google Scholar
Janicki D. Laser cladding of Inconel 625-based composite coatings reinforced by porous chromium carbide particles. Opt Laser Technol. 2017;94:6–14. https://doi.org/10.1016/j.optlastec.2017.03.007JanickiDLaser cladding of Inconel 625-based composite coatings reinforced by porous chromium carbide particles201794614https://doi.org/10.1016/j.optlastec.2017.03.007Search in Google Scholar
Nurminen J, Nakki J, Vuoristo P. Microstructure and properties of hard and wear resistant MMC coatings deposited by laser cladding. Int J Refract Met Hard Mater. 2009;27:472–8. https://doi.org/10.1016/j.ijrmhm.2008.10.008NurminenJNakkiJVuoristoPMicrostructure and properties of hard and wear resistant MMC coatings deposited by laser cladding2009274728https://doi.org/10.1016/j.ijrmhm.2008.10.008Search in Google Scholar
Xu X, Mi G, Xiong L, Jiang P, Shao X, Wang C. Morphologies, microstructures and properties of TiC particle reinforced Inconel 625 coatings obtained by laser cladding with wire. J Alloys Compd. 2018;740:16–27. https://doi.org/10.1016/j.jallcom.2017.12.298XuXMiGXiongLJiangPShaoXWangCMorphologies, microstructures and properties of TiC particle reinforced Inconel 625 coatings obtained by laser cladding with wire20187401627https://doi.org/10.1016/j.jallcom.2017.12.298Search in Google Scholar
Kim SH, Shin GH, Kim BK, Kim KT, Yang DY, Aranas C, et al. Thermo-mechanical improvement of Inconel 718 using ex situ boron nitride-reinforced composites processed by laser powder bed fusion. Sci Rep. 2017;7:14359. https://doi.org/10.1038/s41598-017-14713-1KimSHShinGHKimBKKimKTYangDYAranasCThermo-mechanical improvement of Inconel 718 using ex situ boron nitride-reinforced composites processed by laser powder bed fusion2017714359https://doi.org/10.1038/s41598-017-14713-1Search in Google Scholar
Shivalingaiah K, Sridhar KS, Sethuram D, Shivananda Murhty KV, Koppad PG, Ramesh CS. HVOF sprayed Inconel 718/cubic boron nitride composite coatings: microstructure, microhardness and slurry erosive behaviour. Mater Res Express. 2019;6(12):1265i8. Available from: https://iopscience.iop.org/article/10.1088/2053-1591/ab7067/metaShivalingaiahKSridharKSSethuramDShivananda MurhtyKVKoppadPGRameshCSHVOF sprayed Inconel 718/cubic boron nitride composite coatings: microstructure, microhardness and slurry erosive behaviour20196121265i8Available from: https://iopscience.iop.org/article/10.1088/2053-1591/ab7067/metaSearch in Google Scholar
Tang B, Tan Y, Zhang Z, Xu T, Sun Z, Li X. Effects of process parameters on geometrical characteristics, microstructure and tribological properties of TiB2 reinforced Inconel 718 alloy composite coatings by laser cladding. Coatings. 2020;10:76. https://doi.org/10.3390/coatings10010076TangBTanYZhangZXuTSunZLiXEffects of process parameters on geometrical characteristics, microstructure and tribological properties of TiB2 reinforced Inconel 718 alloy composite coatings by laser cladding20201076https://doi.org/10.3390/coatings10010076Search in Google Scholar
Zhou S, Xu T, Hu C, Wu H, Liu H, Ma X. A comparative study of tungsten carbide and carbon nanotubes reinforced Inconel 625 composite coatings fabricated by laser cladding. Opt Laser Technol. 2021;140:106967. https://doi.org/10.1016/j.optlastec.2021.106967ZhouSXuTHuCWuHLiuHMaXA comparative study of tungsten carbide and carbon nanotubes reinforced Inconel 625 composite coatings fabricated by laser cladding2021140106967https://doi.org/10.1016/j.optlastec.2021.106967Search in Google Scholar
Deng P, Yao C, Feng K, Huang X, Li Z, Li Y, et al. Enhanced wear resistance of laser cladded graphene nanoplatelets reinforced Inconel 625 superalloy composite coating. Surf Coat Technol. 2018;335:334–44. https://doi.org/10.1016/j.surfcoat.2017.12.047DengPYaoCFengKHuangXLiZLiYEnhanced wear resistance of laser cladded graphene nanoplatelets reinforced Inconel 625 superalloy composite coating201833533444https://doi.org/10.1016/j.surfcoat.2017.12.047Search in Google Scholar
Kotarska A, Poloczek T, Janicki D. Characterization of the structure, mechanical properties and erosive resistance of the laser cladded Inconel 625-based coatings reinforced by TiC particles. Materials. 2021;14:2225. https://doi.org/10.3390/ma14092225KotarskaAPoloczekTJanickiDCharacterization of the structure, mechanical properties and erosive resistance of the laser cladded Inconel 625-based coatings reinforced by TiC particles2021142225https://doi.org/10.3390/ma14092225Search in Google Scholar
Galevsky GV, Rudneva VV, Garbuzova AK, Valuev DV. Titanium carbide: nanotechnology, properties, application. IOP Conf Ser Mater Sci Eng. 2015;91:012017. https://doi.org/10.1088/1757-899X/91/1/012017GalevskyGVRudnevaVVGarbuzovaAKValuevDVTitanium carbide: nanotechnology, properties, application201591012017https://doi.org/10.1088/1757-899X/91/1/012017Search in Google Scholar
Gopinath M, Mullick S, Nath AK. Development of process maps based on molten pool thermal history during laser cladding of Inconel 718/TiC metal matrix composite coatings. Surf Coat Technol. 2020;399:126100. https://doi.org/10.1016/j.surfcoat.2020.126100GopinathMMullickSNathAKDevelopment of process maps based on molten pool thermal history during laser cladding of Inconel 718/TiC metal matrix composite coatings2020399126100https://doi.org/10.1016/j.surfcoat.2020.126100Search in Google Scholar
Cao S, Gu D. Laser metal deposition additive manufacturing of TiC/Inconel 625 nanocomposites: relation of densification, microstructures and performance. J Mater Res. 2015;30(23):3616–28. https://doi.org/10.1557/jmr.2015.358CaoSGuDLaser metal deposition additive manufacturing of TiC/Inconel 625 nanocomposites: relation of densification, microstructures and performance20153023361628https://doi.org/10.1557/jmr.2015.358Search in Google Scholar
Jiang D, Hong C, Zhong M, Alkhayat M, Weisheit A, Gasser A, et al. Fabrication of nano-TiCp reinforced Inconel 625 composite coatings by partial dissolution of micro-TiCp through laser cladding energy input control. Surf Coat Technol. 2014;249:125–31. https://doi.org/10.1016/j.surfcoat.2014.03.057JiangDHongCZhongMAlkhayatMWeisheitAGasserAFabrication of nano-TiCp reinforced Inconel 625 composite coatings by partial dissolution of micro-TiCp through laser cladding energy input control201424912531https://doi.org/10.1016/j.surfcoat.2014.03.057Search in Google Scholar
Lian G, Zhang H, Zhang Y, Yao M, Huang X, Chen C. Computational and experimental investigation of micro-hardness and wear resistance of Ni-based alloy and TiC composite coating obtained by laser cladding. Materials. 2019;12(5):793. https://doi.org/10.3390/ma12050793LianGZhangHZhangYYaoMHuangXChenCComputational and experimental investigation of micro-hardness and wear resistance of Ni-based alloy and TiC composite coating obtained by laser cladding2019125793https://doi.org/10.3390/ma12050793Search in Google Scholar
Ge T, Chen L, Gu P, Ren X, Chen X. Microstructure and corrosion resistance of TiC/Inconel 625 composite coatings by extreme high speed laser cladding. Opt Laser Technol. 2022;150:107919. https://doi.org/10.1016/j.optastec.2022.107919GeTChenLGuPRenXChenXMicrostructure and corrosion resistance of TiC/Inconel 625 composite coatings by extreme high speed laser cladding2022150107919https://doi.org/10.1016/j.optastec.2022.107919Search in Google Scholar
Bakkar A, Ahmed MMZ, Alsaleh NA, El-Sayed Seleman MM, Ataya S. Microstructure, wear, and corrosion characterization of high TiC content Inconel 625 matrix composites. J Mater Res Technol. 2019;8(1):1102–1110. https://doi.org/10.1016/j.jmrt.2018.09.001BakkarAAhmedMMZAlsalehNAEl-Sayed SelemanMMAtayaSMicrostructure, wear, and corrosion characterization of high TiC content Inconel 625 matrix composites20198111021110https://doi.org/10.1016/j.jmrt.2018.09.001Search in Google Scholar
Poloczek T, Janicki D, Górka J, Kotarska A. Effect of Ti and C alloyants on the microstructure of laser cladded cobalt-chromium coatings. IOP Conf Ser Mater Sci Eng. 2021;1182:012063. https://doi.org/10.1088/1757-899X/1182/1/012063PoloczekTJanickiDGórkaJKotarskaAEffect of Ti and C alloyants on the microstructure of laser cladded cobalt-chromium coatings20211182012063https://doi.org/10.1088/1757-899X/1182/1/012063Search in Google Scholar
Janicki D. Shaping the structure and properties of surface layers of ductile cast iron by laser alloying. Gliwice, Poland: Wydawnictwo Politechniki Śląskiej; 2018. p. 50.JanickiDGliwice, PolandWydawnictwo Politechniki Śląskiej201850Search in Google Scholar
Cieslak MJ, Headley TJ, Romig AD, Kollie T. A melting and solidification study of alloy 625. Metall Mater Trans A 1988;19A:2319–31. Available from: doi:10.1007/BF02645056CieslakMJHeadleyTJRomigADKollieTA melting and solidification study of alloy 625198819A231931Available from:10.1007/BF02645056Open DOISearch in Google Scholar
Kotarska A. The laser alloying process of ductile cast iron surface with titanium. Metals. 2021;11(2):282. Available from doi: 10.3390/met11020282KotarskaAThe laser alloying process of ductile cast iron surface with titanium2021112282Available from10.3390/met11020282Open DOISearch in Google Scholar
Łyczkowska K, Michalska J. Studies on the corrosion resistance of laser-welded Inconel 600 and Inconel 625 nickel-based superalloys. Arch Metall Mater 2017;62(2):653–6. https://doi.org/10.1515/amm-2017-0100ŁyczkowskaKMichalskaJStudies on the corrosion resistance of laser-welded Inconel 600 and Inconel 625 nickel-based superalloys20176226536https://doi.org/10.1515/amm-2017-0100Search in Google Scholar
Shvets VA, Lavrenko VA, Talash VN, Panasyuk AD, Rudenko YB. Anodic polarization of titanium carbide TiCx in 3% NaCl solution in the homogeneity range. Powder Metall Met Ceram. 2016;55:113–23. https://doi.org/10.1007/s11106-016-9829-5ShvetsVALavrenkoVATalashVNPanasyukADRudenkoYBAnodic polarization of titanium carbide TiCx in 3% NaCl solution in the homogeneity range20165511323https://doi.org/10.1007/s11106-016-9829-5Search in Google Scholar