This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Runge M. Spinning and flow forming: spinning and flow forming technology, product design, equipment, control systems. Radevormwald: Lippert Druck GmbH; 1993.RungeMRadevormwaldLippert Druck GmbH1993Search in Google Scholar
Grainger JA. The flow turning of metals. Eastbourne and London: The Machinery Publishing Co. Ltd.; 1969.GraingerJAEastbourne and LondonThe Machinery Publishing Co. Ltd.1969Search in Google Scholar
Meshcherin VT. Listovaya Shtampovka. Moskva: Mashinostroyenie; 1975.MeshcherinVTMoskvaMashinostroyenie1975Search in Google Scholar
Arai H. Force-controlled metal spinning machine using linear motors. Proc IEEE Int Conf Robot Autom. 2006;2006:4031–6. https://doi.org/10.1109/ROBOT.2006.1642321.AraiHForce-controlled metal spinning machine using linear motors2006200640316https://doi.org/10.1109/ROBOT.2006.1642321.10.1109/ROBOT.2006.1642321Search in Google Scholar
Shimizu I. Asymmetric forming of aluminum sheets by synchronous spinning. J Mater Process Technol. 2010;210:585–92. https://doi.org/10.1016/j.jmatprotec.2009.11.002.ShimizuIAsymmetric forming of aluminum sheets by synchronous spinning201021058592https://doi.org/10.1016/j.jmatprotec.2009.11.002.10.1016/j.jmatprotec.2009.11.002Search in Google Scholar
Jia Z, Han Z, Liu B, Xiao Y. Work hardening of non-axisymmetric die-less spinning. J Mech Eng. 2017;63:111–8. https://doi.org/10.5545/sv-jme.2016.3589.JiaZHanZLiuBXiaoYWork hardening of non-axisymmetric die-less spinning2017631118https://doi.org/10.5545/sv-jme.2016.3589.10.5545/sv-jme.2016.3589Search in Google Scholar
Jia Z, Han ZR, Liu BM, Fan ZJ. Numerical simulation and experimental study on the non-axisymmetric die-less shear spinning. Int J Adv Manuf Technol. 2017;92:497–504. https://doi.org/10.1007/s00170-017-0172-x.JiaZHanZRLiuBMFanZJNumerical simulation and experimental study on the non-axisymmetric die-less shear spinning201792497504https://doi.org/10.1007/s00170-017-0172-x.10.1007/s00170-017-0172-xSearch in Google Scholar
Awiszus B, Härtel S. Numerical simulation of non-circular spinning: a rotationally non-symmetric spinning process. Prod Eng. 2011;5:605–12. https://doi.org/10.1007/s11740-011-0335-9.AwiszusBHärtelSNumerical simulation of non-circular spinning: a rotationally non-symmetric spinning process2011560512https://doi.org/10.1007/s11740-011-0335-9.10.1007/s11740-011-0335-9Search in Google Scholar
Sugita Y, Arai H. Formability in synchronous multipass spinning using simple pass set. J Mater Process Technol. 2015;217:336–44. https://doi.org/10.1016/j.jmatprotec.2014.11.017.SugitaYAraiHFormability in synchronous multipass spinning using simple pass set201521733644https://doi.org/10.1016/j.jmatprotec.2014.11.017.10.1016/j.jmatprotec.2014.11.017Search in Google Scholar
Polyblank JA, Allwood JM. Parametric toolpath design in metal spinning. CIRP Ann Manuf Technol. 2015;64:301–4. https://doi.org/10.1016/j.cirp.2015.04.077.PolyblankJAAllwoodJMParametric toolpath design in metal spinning2015643014https://doi.org/10.1016/j.cirp.2015.04.077.10.1016/j.cirp.2015.04.077Search in Google Scholar
Arai H, Gondo S. Oblique/curved tube necking formed by synchronous multipass spinning. Metals. 2020;10:733. https://doi.org/10.3390/met10060733.AraiHGondoSOblique/curved tube necking formed by synchronous multipass spinning202010733https://doi.org/10.3390/met10060733.10.3390/met10060733Search in Google Scholar
Loukaides EG, Russo IM. Toolpath generation for asymmetric mandrel-free spinning. Procedia Eng. 2017;207:1707–12. https://doi.org/10.1016/j.proeng.2017.10.926.LoukaidesEGRussoIMToolpath generation for asymmetric mandrel-free spinning2017207170712https://doi.org/10.1016/j.proeng.2017.10.926.10.1016/j.proeng.2017.10.926Search in Google Scholar
Rentsch B, Manopulo N, Hora P. Numerical modelling, validation and analysis of multi-pass sheet metal spinning processes. Int J Mater Form. 2017;10:641–51. https://doi.org/10.1007/s12289-016-1308-5.RentschBManopuloNHoraPNumerical modelling, validation and analysis of multi-pass sheet metal spinning processes20171064151https://doi.org/10.1007/s12289-016-1308-5.10.1007/s12289-016-1308-5Search in Google Scholar
Yaman K, Özcan M, Tekiner Z. Determination of the spinning parameters of AISI 304L stainless steel by using finite element method. J Fac Eng Archit Gazi Univ. 2018;33:299–311. https://doi.org/10.17341/gazimmfd.406802.YamanKÖzcanMTekinerZDetermination of the spinning parameters of AISI 304L stainless steel by using finite element method201833299311https://doi.org/10.17341/gazimmfd.406802.10.17341/gazimmfd.406802Search in Google Scholar
Sedighi M, Jalili I, Kasaeian-Naeini M. Experimental study and FEM analysis of forward hot dieless spinning. Mechanics and Industry 2018;19. https://doi.org/10.1051/MECA/2018034.SedighiMJaliliIKasaeian-NaeiniMExperimental study and FEM analysis of forward hot dieless spinning201819https://doi.org/10.1051/MECA/2018034.10.1051/meca/2018034Search in Google Scholar
Music O, Allwood JM, Kawai K. A review of the mechanics of metal spinning. J Mater Process Technol. 2010;210:3–23. https://doi.org/10.1016/J.JMATPROTEC.2009.08.021.MusicOAllwoodJMKawaiKA review of the mechanics of metal spinning2010210323https://doi.org/10.1016/J.JMATPROTEC.2009.08.021.10.1016/j.jmatprotec.2009.08.021Search in Google Scholar
Wang Q, Wang T, Wang ZR. A study of the working force in conventional spinning. In: Proceedings of the Fourth International Conference of Rotary Forming, 1989, pp. 103–8.WangQWangTWangZRIn:Proceedings of the Fourth International Conference of Rotary Forming19891038Search in Google Scholar
Kim JH, Park JH, Kim C. A study on the mechanics of shear spinning of cones. J Mech Sci Technol. 2006;20:806–18. https://doi.org/10.1007/BF02915944.KimJHParkJHKimCA study on the mechanics of shear spinning of cones20062080618https://doi.org/10.1007/BF02915944.10.1007/BF02915944Search in Google Scholar
Hayama M, Murota T, Kudo H. Deformation modes and wrinkling of flange on shear spinning. Bull Japan Soc Mech Eng. 1966;9:423–33. https://doi.org/10.1299/JSME1958.9.423.HayamaMMurotaTKudoHDeformation modes and wrinkling of flange on shear spinning1966942333https://doi.org/10.1299/JSME1958.9.423.10.1299/jsme1958.9.423Search in Google Scholar
Quigley E, Monaghan J. Metal forming: an analysis of spinning processes. J Mater Process Technol. 2000;103:114–9. https://doi.org/10.1016/S0924-0136(00)00394-0.QuigleyEMonaghanJMetal forming: an analysis of spinning processes20001031149https://doi.org/10.1016/S0924-0136(00)00394-0.10.1016/S0924-0136(00)00394-0Search in Google Scholar
Alberti N, Cannizzaro L, Lo Valvo E, Micari F. Analysis of metal spinning processes by the ADINA code. Comput Struct. 1989;32:517–25. https://doi.org/10.1016/0045-7949(89)90343-X.AlbertiNCannizzaroLLo ValvoEMicariFAnalysis of metal spinning processes by the ADINA code19893251725https://doi.org/10.1016/0045-7949(89)90343-X.10.1016/0045-7949(89)90343-XSearch in Google Scholar
Lu XY, Zhang S, Hou H, Li JZ, Zhou LX, Li ZQ. Three dimensional fe analysis on flange bending for TC4 alloy during shear spinning. J Mater Sci Technol. 2006;22:855–9.LuXYZhangSHouHLiJZZhouLXLiZQThree dimensional fe analysis on flange bending for TC4 alloy during shear spinning2006228559Search in Google Scholar
Zhan M, Yang H, Zhang JH, Xu YL, Ma F. 3D FEM analysis of influence of roller feed rate on forming force and quality of cone spinning. J Mater Process Technol. 2007;187–188:486–91. https://doi.org/10.1016/j.jmatprotec.2006.11.114.ZhanMYangHZhangJHXuYLMaF3D FEM analysis of influence of roller feed rate on forming force and quality of cone spinning2007187–18848691https://doi.org/10.1016/j.jmatprotec.2006.11.114.10.1016/j.jmatprotec.2006.11.114Search in Google Scholar
Xia QX, Lai ZY, Long H, Cheng XQ. A study of the spinning force of hollow parts with triangular cross sections. Int J Adv Manuf Technol. 2013;68:2461–70. https://doi.org/10.1007/s00170-013-4847-7.XiaQXLaiZYLongHChengXQA study of the spinning force of hollow parts with triangular cross sections201368246170https://doi.org/10.1007/s00170-013-4847-7.10.1007/s00170-013-4847-7Search in Google Scholar