1. bookVolume 27 (2021): Issue 3 (June 2021)
Conference Details
License
Format
Conference
eISSN
2451-3113
First Published
15 Dec 2015
Publication timeframe
3 times per year
Languages
English
access type Open Access

Solution for Synchronizing two Belt Conveyers using Motors with different Speeds Drive

Published Online: 12 Jul 2021
Volume & Issue: Volume 27 (2021) - Issue 3 (June 2021)
Page range: 1 - 6
Conference Details
License
Format
Conference
eISSN
2451-3113
First Published
15 Dec 2015
Publication timeframe
3 times per year
Languages
English
Abstract

It is known that main aspect at a belt conveyor functioning is speed control. This issue has a greater impact upon a process when two or more belt conveyers must work together in order to obtain high quality products. In this case we talk about, not only speed controlling, but of another important aspect, synchronization of belt conveyers. Present paper describes a solution designed and implemented for synchronization of two belt conveyers of different lengths. Each belt conveyer is driven by a motor. Each motor works at its own speed drive. The two conveyors are working together in a process of producing anti-slip door mats which are mainly used at inside door, decorative purpose, etc. The proposed solution is using a PLC and two variable speed drivers with different transmission ratio. This solution can be applied in processes which are divided in sub-processes that must work as a production flow.

Keywords

[1] Bebic M.Z., Ristic L.B., Speed controlled belt conveyors: Drives and mechanical considerations, Advances in electrical and computer engineering, Vol 18, No.1, 2018.10.4316/AECE.2018.01007 Search in Google Scholar

[2] Fabian Jordan, Schleuniger P., Detection and synchronisation of moving packaging units on a conveyor belt using a synchronised portal crane, International Conference on Industrial Process Control and Engineering Applications, Rome, Italy, January, 2021. Search in Google Scholar

[3] Meshram P.A., Sahu A.R., Design, modelling and analisys of conveyor system used for transportation of cartons, International Journal of Research in Advent Technology, Vol 4, Nr 1, January 2016 Stroia M. D, Derbac D, Hatiegan C, Cîndea L, Thermostat Model With Arduino uno Board for Controlling a Cooling System, National Scientific Search in Google Scholar

[4] Stroia Mihaela-Dorica, Hatiegan Cornel, Popescu Cristinel, Virtual Instrument Designed for Detecting Distortion Regime Caused by Frequency Variation, Analele Universităţii Constantin Brâncuşi din Târgu-Jiu - Seria Inginerie, Nr. 4, 2020. Search in Google Scholar

[5] Stroia M.D, Hatiegan C., Popescu C., Virtual instrument designed for data acquisition, Studia Universitatis Babes-Bolyai Engineering, Vol. 65, Nr. 1, 202010.24193/subbeng.2020.1.20 Search in Google Scholar

[6] Stroia M.D., Anghel D., Moșteanu D.E., Hațiegan C., Communication Interface Prototype Used for Data Transmission at Electric Systems, International Conference Knowledge-Based Organization, Vol. XXV, No 3, 2019.10.2478/kbo-2019-0119 Search in Google Scholar

[7] Vittorio Giovannetti et all, Conveyor belt clock synchronization, Quantum Physics, Rev. A 70, pp. 1-8, Cornell University, 26 May 2004.10.1103/PhysRevA.70.043808 Search in Google Scholar

[8] Ioan Pădureanu, Marcel Jurcu, Ladislau Augustinov, Cornel Haţiegan,Eugen Răduca, Laurenţiu Pădeanu, Optimisation of the Start-up and Operation Regimes of Cooling Water Pumps of a High-Power Hydro Generator, Analele Universităţii “Eftimie Murgu”, Fascicula de Inginerie, Anul XXII, Nr. 1, 2015. Search in Google Scholar

[9] Ioan Pădureanu, Marcel Jurcu, Ladislau Augustinov, Cornel Haţiegan, Eugen Răduca, Implementation of an Automatic System for the Monitoring of Start-up and Operating Regimes of the Cooling Water Installations of a Hydro Generator, Analele Universităţii “Eftimie Murgu”, Fascicula de Inginerie, Anul XXII, Nr. 1, 2015. Search in Google Scholar

[10] Eugen Raduca, Lucian Nistor, Cornel Hatiegan, Mihaela Raduca, Ioan Padureanu, Silviu Draghici, Web server for command, control and monitoring of industrial equipment, Advanced Topics in Electrical Engineering (ATEE), 2015 9th International Symposium on, 7-9 May Bucharest, 2015.10.1109/ATEE.2015.7133673 Search in Google Scholar

[11] M. Stroia, D. Moşteanu, I. Virca, E.Răduca, C. Popescu, C. Haţiegan, Case studies for automotive components using CAD and CAE techniques, International Conference on Applied Sciences ICAS 2019, May 9-11, Hunedoara, Romania, 2019. Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo