[
Abergel, T, et al. (2018), ‘Global Status Report. Towards a zero-emission, efficient, and resilient buildings and construction sector’, Global Alliance for Buildings and Construction. Available online: https://www.worldgbc.org/sites/default/files/2018%20GlobalABC%20Global%20Status%20Report (accessed on 19 June 2020).
]Search in Google Scholar
[
Amziane, Sofiane, Ferraris, Chiara F, and Koehler, Eric P (2005), ‘Measurement of workability of fresh concrete using a mixing truck’, Journal of research of the National Institute of Standards and Technology, 110 (1), 55.10.6028/jres.110.006
]Search in Google Scholar
[
ASTM, ASTM (2014), ‘305-14 Standard practice for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency ASTM C305-14’, ASTM Int. West Conshohocken PA.
]Search in Google Scholar
[
Benaicha, Mouhcine, et al. (2015), ‘Marsh cone coupled to a plexiglas horizontal channel: Rheological characterization of cement grout’, Flow Measurement and Instrumentation, 45, 126-34.10.1016/j.flowmeasinst.2015.06.004
]Search in Google Scholar
[
Bouras, R (2011), ‘Rheology of cement pastes for self-compacting concrete’, (PhD thesis, Mouloud Mammeri University of Tizi Ouzou).
]Search in Google Scholar
[
Bouras, Rachid, Chaouche, Mohend, and Kaci, Salah (2008), ‘Influence of viscosity-modifying admixtures on the thixotropic behaviour of cement pastes’, Applied Rheology, 18 (4), 45604-1-04-8.10.1515/arh-2008-0015
]Search in Google Scholar
[
Bouvet, Adrien, et al. (2010), ‘The mini-conical slump flow test: Analysis and numerical study’, 40 (10), 1517-23.10.1016/j.cemconres.2010.06.005
]Search in Google Scholar
[
Clayton, S, Grice, TG, and Boger, DV (2003), ‘Analysis of the slump test for on-site yield stress measurement of mineral suspensions’, International journal of mineral processing, 70 (1-4), 3-21.10.1016/S0301-7516(02)00148-5
]Search in Google Scholar
[
Erzengin, S Gamze, et al. (2018), ‘The properties of cement systems superplasticized with methacrylic ester-based polycarboxylates’, Construction and Building Materials, 166, 96-109.10.1016/j.conbuildmat.2018.01.088
]Search in Google Scholar
[
Estelle, Patrice and Lanos, Christophe (2012), ‘High torque vane rheometer for concrete: principle and validation from rheological measurements’, Applied Rheology, 22 (1).
]Search in Google Scholar
[
Flatt, Robert J, Martys, Nicos, and Bergström, Lennart (2004), ‘The rheology of cementitious materials’, MRS bulletin, 29 (5), 314-18.10.1557/mrs2004.96
]Search in Google Scholar
[
Gao, Jinglong and Fourie, Andy (2015), ‘Using the flume test for yield stress measurement of thickened tailings’, Minerals Engineering, 81, 116-27.10.1016/j.mineng.2015.07.013
]Search in Google Scholar
[
Guo, Yiqun, et al. (2017), ‘Evaluating the distance between particles in fresh cement paste based on the yield stress and particle size’, Construction and building materials, 142, 109-16.10.1016/j.conbuildmat.2017.03.055
]Search in Google Scholar
[
Irgens, Fridtjov (2008), Continuum mechanics (Springer Science & Business Media).
]Search in Google Scholar
[
Kemer, Houssam, et al. (2021), ‘Shear-thickening behavior of sustainable cement paste—Controlling physical parameters of new sources of supplementary cementitious materials’, 310, 125277.10.1016/j.conbuildmat.2021.125277
]Search in Google Scholar
[
KOKADO, Takeshi and MIYAGAWA, Toyoaki (1999), ‘Study on a method of obtaining rheological coefficients of high-flow concrete from slump flow test’, Doboku Gakkai Ronbunshu, 1999 (634), 113-29.10.2208/jscej.1999.634_113
]Search in Google Scholar
[
Kovler, Konstantin and Roussel, Nicolas (2011), ‘Properties of fresh and hardened concrete’, Cement and Concrete Research, 41 (7), 775-92.10.1016/j.cemconres.2011.03.009
]Search in Google Scholar
[
Kwasny, Jacek, et al. (2015), ‘Influence of rheology on the quality of surface finish of cement-based mortars’, Construction and Building Materials, 89, 102-09.10.1016/j.conbuildmat.2015.03.111
]Search in Google Scholar
[
Laidani, Zine El-Abidine, et al. (2020), ‘Experimental investigation on effects of calcined bentonite on fresh, strength and durability properties of sustainable self-compacting concrete’, 230, 117062.10.1016/j.conbuildmat.2019.117062
]Search in Google Scholar
[
Legrand, Claude (1972), ‘Contribution à l’étude de la rhéologie du béton frais’, Matériaux et Construction, 5 (5), 275-95.10.1007/BF02474870
]Search in Google Scholar
[
Mesboua, N, et al. (2021), ‘CALCINATED BENTONITE AS SUPPLEMENTARY CEMENTITIOUS MATERIALS IN CEMENT-BASED MORTAR’, 11 (1).10.2478/jaes-2021-0004
]Search in Google Scholar
[
Mesboua, Noureddine, Benyounes, Khaled, and Benmounah, Abdelbaki %J Cogent Engineering (2018), ‘Study of the impact of bentonite on the physico-mechanical and flow properties of cement grout’, 5 (1), 1446252.10.1080/23311916.2018.1446252
]Search in Google Scholar
[
Murata, J (1984), ‘Flow and deformation of fresh concrete’, Materiaux et Construction, 17 (2), 117-29.10.1007/BF02473663
]Search in Google Scholar
[
Nehdi, M and Rahman, M-A (2004), ‘Estimating rheological properties of cement pastes using various rheological models for different test geometry, gap and surface friction’, Cement and concrete research, 34 (11), 1993-2007.10.1016/j.cemconres.2004.02.020
]Search in Google Scholar
[
Noureddine, Mesboua, et al. (2015), ‘Influence de l’embuvage et de l’élancement des fibres sur les propriétés des mortiers destinés aux bétons de fibres’, 2 (3), 145-57.
]Search in Google Scholar
[
Pashias, N, et al. (1996), ‘A fifty cent rheometer for yield stress measurement’, Journal of Rheology, 40 (6), 1179-89.10.1122/1.550780
]Search in Google Scholar
[
Pierre, Alexandre, Lanos, Christophe, and Estelle, Patrice (2013), ‘Extension of spread-slump formulae for yield stress evaluation’, Applied Rheology, 23 (6).
]Search in Google Scholar
[
Roussel, N and Coussot, Ph %J Journal of rheology (2005a), ‘“Fifty-cent rheometer” for yield stress measurements: from slump to spreading flow’, 49 (3), 705-18.10.1122/1.1879041
]Search in Google Scholar
[
Roussel, N and Coussot, Ph (2005b), ‘“Fifty-cent rheometer” for yield stress measurements: from slump to spreading flow’, Journal of rheology, 49 (3), 705-18.10.1122/1.1879041
]Search in Google Scholar
[
Roussel, Nicolas (2006), ‘A thixotropy model for fresh fluid concretes: theory, validation and applications’, Cement and concrete research, 36 (10), 1797-806.10.1016/j.cemconres.2006.05.025
]Search in Google Scholar
[
Roussel, Nicolas, Stéfani, Christian, and Leroy, Robert (2005), ‘From mini-cone test to Abrams cone test: measurement of cement-based materials yield stress using slump tests’, Cement and concrete research, 35 (5), 817-22.10.1016/j.cemconres.2004.07.032
]Search in Google Scholar
[
Saak, Aaron W, Jennings, Hamlin M, and Shah, Surendra P (2004), ‘A generalized approach for the determination of yield stress by slump and slump flow’, Cement and concrete research, 34 (3), 363-71.10.1016/j.cemconres.2003.08.005
]Search in Google Scholar
[
Schlesinger, S, et al. (1974), ‘Developing standard procedures for simulation validation and verification(autopilot, atmosphere and transportation models)’, Summer Computer Simulation Conference, Houston, Tex, 927-33.
]Search in Google Scholar
[
Schowalter, WR and Christensen, G (1998), ‘Toward a rationalization of the slump test for fresh concrete: comparisons of calculations and experiments’, Journal of Rheology, 42 (4), 865-70.10.1122/1.550905
]Search in Google Scholar
[
Sonebi, Mohammed (2010), ‘Optimization of cement grouts containing silica fume and viscosity modifying admixture’, Journal of materials in civil engineering, 22 (4), 332-42.10.1061/(ASCE)MT.1943-5533.0000026
]Search in Google Scholar
[
Tattersall, Geoffrey Howarth and Banfill, Phillip FG (1983), The rheology of fresh concrete.
]Search in Google Scholar
[
Williams, David A, Saak, Aaron W, and Jennings, Hamlin M (1999), ‘The influence of mixing on the rheology of fresh cement paste’, Cement and concrete research, 29 (9), 1491-96.10.1016/S0008-8846(99)00124-6
]Search in Google Scholar
[
Yeh, I-Cheng (2006), ‘Exploring concrete slump model using artificial neural networks’, Journal of Computing in Civil Engineering, 20 (3), 217-21.10.1061/(ASCE)0887-3801(2006)20:3(217)
]Search in Google Scholar
[
(2007), ‘Modeling slump flow of concrete using second-order regressions and artificial neural networks’, Cement and concrete composites, 29 (6), 474-80.10.1016/j.cemconcomp.2007.02.001
]Search in Google Scholar
[
Zain, Muhammad Fauzi Mohd, et al. (2011), ‘Production of rice husk ash for use in concrete as a supplementary cementitious material’, Construction and building materials, 25 (2), 798-805.10.1016/j.conbuildmat.2010.07.003
]Search in Google Scholar