1. bookVolume 3 (2021): Issue 1 (May 2021)
Journal Details
License
Format
Journal
First Published
30 Mar 2019
Publication timeframe
1 time per year
Languages
English
access type Open Access

Influence of Technical Condition of Control and Measurement Equipment on Calibration Results

Published Online: 20 Jun 2021
Page range: 79 - 88
Received: 06 Dec 2020
Accepted: 25 Mar 2021
Journal Details
License
Format
Journal
First Published
30 Mar 2019
Publication timeframe
1 time per year
Languages
English
Abstract

In the paper there are analyzed the procedures used in the process of calibrating concerning control and measurement equipment. There was assumed the mathematical model of the measuring instrument which was then analyzed. The factors that result from the imperfect technical condition of the control and measurement equipment and may have an impact on the measurement results were also analyzed. Models of errors’ models were assumed that may affect the calibration results. The static calibration of control and measurement equipment was analyzed. The results of numerical simulations concerning the static calibration of control and measurement equipment were presented, taking into account the linear and non-linear processing functions of the measurement equipment. The results of computations obtained for various models of processing functions were compared with each other and conclusions were drawn regarding the accuracy of the mapping of the measured quantity.

Keywords

Arendarski, J., Gliwa-Gliwińśki, J., Jabłoński, Z., Ratajczyk, E., Tomasik (red.), J., Żebrowska-Łucyk, S., 2009. Sprawdzanie przyrządów do pomiarów długości i kąta, Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa. Search in Google Scholar

Bellman, R., 1960. Introduction to matrix analysis, McGraw-Hill, New York. Search in Google Scholar

Doyle, J., F., 2004. Modern experimental stress analysis, Willey, Chichester. Search in Google Scholar

Draper, N.R., Smith, H., 1981. Applied regression analysis, Willey, New York. Search in Google Scholar

Hagel, R., 1975. Miernictwo dynamiczne, Wydawnictwa Naukowo-Techniczne, Warszawa. Search in Google Scholar

Horn, R.A., Johnson, C., 1986. Matrix analysis, Cambridge University Press, Cambridge. Search in Google Scholar

IEC 60050-301:2000. International Electrotechnical Vocabulary (IEV) - Part 301: General terms on measurements in electricity. Search in Google Scholar

International Dictionary of Basic and General Metrology Terms, 1993. Central Office of Measures, Warsaw. Search in Google Scholar

ISO 14978:2018. Geometrical product specifications (GPS) — General concepts and requirements for GPS measuring equipment Search in Google Scholar

ISO 9000:2015a. Quality management system – Fundamentals and vocabulary. Search in Google Scholar

ISO 9001:2015b. Quality management systems – Requirements. Search in Google Scholar

ISO/IEC 17025:2017. General requirements for the competence of testing and calibration laboratories Search in Google Scholar

ISO/IEC Guide 99:2010. International vocabulary of metrology - Basic and general concepts and associated terms (VIM) Search in Google Scholar

Jakubiec, W., Malinowski, J., 2004. Metrologia wielkości geometrycznych, Wydawnictwa Naukowo-Techniczne, Warszawa. Search in Google Scholar

Jakubiec, W., Zator, S., Majda, P., 2014. Metrologia, Polskie Wydawnictwo Ekonomiczne S.A., Warszawa. Search in Google Scholar

Lawson, C., Hanson, R.J., 1974. Solving least squares problems, Prentice-Hall, Englewod Cliffs. Search in Google Scholar

Ostasz G., Czerwińska, K., Pacana, A., 2020. Quality management of aluminum pistons with the use of quality control points, Management Systems in Production Engineering, 28(1), 29-33. Search in Google Scholar

Pacana A., Czerwińska K., Bednarowa L., 2018. Comprehensive improvement of the surface quality of the diesel engine piston, Metalirgija, 58, 3-4, 2018, 329-332. Search in Google Scholar

Piotrowski, J., Kostyrko, K., 2012. Wzorcowanie aparatury pomiarowej, Wydawnictwo Naukowe PWN S.A., Warszawa. Search in Google Scholar

Siwiec, D., Bednárowá, L., Pacana, A., Zawada, M., Rusko, M., 2019. Decision support in the selection of fluorescent penetrants for industrial non-destructive testing. Przemysł Chemiczny, 98(10), 1594-1596. Search in Google Scholar

Siwiec, D., Pacana, A., 2021. Method of improve the level of product quality. Production Engineering Archives, 27(1), 1–7. https://doi.org/10.30657/pea.2021.27.1 Search in Google Scholar

Tikhonov, A.N., Arsenin, V.Y., 1977. Solutions of ill-posed problems, Willey, New York. Search in Google Scholar

Willkinson, J.H., 1965. The algebraic eigenvalue problem, Clarendon Press, Oxford. Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo