1. bookVolume 1 (2019): Issue 1 (March 2019)
Journal Details
License
Format
Journal
First Published
30 Mar 2019
Publication timeframe
1 time per year
Languages
English
Copyright
© 2020 Sciendo

Safety of CMS Experiment Systems Operation – Integration of a New CO2 Fire Extinguishing Weighing System to the CMS Safety Panel

Published Online: 28 Mar 2019
Page range: 490 - 497
Received: 07 Nov 2018
Accepted: 19 Dec 2018
Journal Details
License
Format
Journal
First Published
30 Mar 2019
Publication timeframe
1 time per year
Languages
English
Copyright
© 2020 Sciendo
Abstract

The subject of the article is the integration of a new CO2 fire extinguishing weighing system to the panel displaying the status of Compact Muon Solenoid (CMS) detector safety systems (CMS Safety Panel) at CERN. The CO2 fire extinguishing system is responsible for protection of unique control devices, so safety of its operation and the weighing system was designed to monitor the state of it and make it reliable. CMS Safety Panel displays status of safety systems used in CMS Experiment and it is based on JCOP Framework that guarantee compatibility of all the projects. The integration of the new CO2 fire extinguishing system to the CMS Safety Panel requires that the system meets the assumptions that other projects fulfil and allows for clear monitoring of its situation along with the rest of the security systems.

Keywords

Burkimsh, P., 2016. WinCC-OA & The JCOP Framework. http://jcop.web.cern.ch/platforms/wincc-oa-315 [date: 0811.2018]Search in Google Scholar

CERN JCOP FW Team, 2010. Joint controls project (JCOP) framework sub-project guidelines and conventions. http://jcop.web.cern.ch/jcop-framework [date: 08.11.2018]Search in Google Scholar

Dudek, A., 2011. Investigations of microstructure and properties in bioceramic coatings used in medicine. Archives of Metallurgy and Materials, 56, 135-140, DOI: 10.2478/v10172-011-0015-y10.2478/v10172-011-0015-yOpen DOISearch in Google Scholar

Dudek, A., Włodarczyk, R., Nitkiewicz, Z., 2010. Structural analysis of sintered materials used for low-temperature fuel cell plates. Materials Science Forum 638-642, 536-541, DOI: 10.4028/www.scientific.net/MSF.638-642.53610.4028/www.scientific.net/MSF.638-642.536Open DOISearch in Google Scholar

Dwornicka, R., 2014. The impact of the power plant unit start-up scheme on the pollution load. Advanced Materials Research, 874, 63-69. DOI: 10.4028/www.scientific.net/AMR.874.6310.4028/www.scientific.net/AMR.874.63Open DOISearch in Google Scholar

Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobędza, J., 2017. The laser textured surfaces of the silicon carbide analyzed with the bootstrapped tribology model. Metal 2017: 26th Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1252-1257.Search in Google Scholar

Fabiś-Domagała, J., Filo, G., Momeni, H., Domagała, M., 2018. Instruments of identification of hydraulic components potential failures. MATEC Web Conf., 183, art. 03008, DOI: 10.1051/matecconf/20181830300810.1051/matecconf/201818303008Open DOISearch in Google Scholar

Fraden, J., 2010. Handbook of Modern Sensors. Physics, Designs, and Applications. Springer-Verlag New York.Search in Google Scholar

Guidoni, G., Dudek, A., Patsias, S., Anglada, M., 2005. Fracture behaviour of thermal barrier coatings after high temperature exposure in air. Materials Science and Engineering: A, 397, 209-214, DOI: https://doi.org/10.1016/j.msea.2005.02.022 10.1016/j.msea.2005.02.022Open DOISearch in Google Scholar

Henley, A.J., Wolf, D., 2018. Learn Data Analysis with Python. Lessons in coding. Apress, USA.Search in Google Scholar

Klimecka-Tatar, D., 2018. Powder surface modification as a method of corrosion rate limitation of the magnetic RE-M-B composite in an acid medium with different pH. Materials Research Proceedings, 5, 231-236, DOI: 10.21741/9781945291814-4110.21741/9781945291814-41Open DOISearch in Google Scholar

Klimecka-Tatar, D., Borkowski, S., Sygut, P., 2015. The kinetics of Ti-1Al-1Mn alloy thermal oxidation and characteristic of oxide layer. Archives of Metallurgy and Materials, 60, 735-738, DOI: 10.1515/amm-2015-019910.1515/amm-2015-0199Open DOISearch in Google Scholar

Korzekwa, J., Skoneczny, W., Dercz, G., Bara, M., 2014. Wear mechanism of Al2O3/WS2 with PEEK/BG plastic. Journal of Tribology, 136, art. 011601. DOI: 10.1115/1.402493810.1115/1.4024938Open DOISearch in Google Scholar

Lisowski, E., Filo, G., 2017. Analysis of a proportional control valve flow coefficient with the usage of a CFD method. Flow Measurement and Instrumentation, 53, 269-278, DOI: 10.1016/j.flowmeasinst.2016.12.00910.1016/j.flowmeasinst.2016.12.009Open DOISearch in Google Scholar

Miller, C., 2018. Hands-On Data Analysis with NumPy and pandas: Implement Python packages from data manipulation to processing. Packt Publishing, Birmingham, UK.Search in Google Scholar

Opydo, M., Kobyłecki, R., Dudek, A., Bis, Z., 2016. The effect of biomass co-combustion in a CFB boiler on solids accumulation on surfaces of P91 steel tube samples. Biomass & Bioenergy 85, 61-68.10.1016/j.biombioe.2015.12.011Open DOISearch in Google Scholar

Pietraszek, J., 2003. Response surface methodology at irregular grids based on Voronoi scheme with neural network approximator. In: Rutkowski L., Kacprzyk J. (eds) Neural Networks and Soft Computing. Advances in Soft Computing, vol. 19. Physica, Heidelberg, 250-255, DOI: 10.1007/978-3-7908-1902-1_35.10.1007/978-3-7908-1902-1_35Open DOISearch in Google Scholar

Pietraszek, J., Dwornicka, R., Krawczyk, M., Kołomycki, M., 2017. The non-parametric approach to the quantification of the uncertainty in the design of experiments modelling. UNCECOMP 2017, NTU of Athens, 598-604.Search in Google Scholar

Pietraszek, J., Gądek-Moszczak, A., Toruński, T., 2014. Modeling of errors counting system for PCB soldered in the wave soldering technology. Advanced Materials Research, 874, 139-143, DOI: 10.4028/www.scientific.net/AMR.874.13910.4028/www.scientific.net/AMR.874.139Open DOISearch in Google Scholar

Pietraszek, J., Kołomycki, M., Szczotok, A., Dwornicka, R., 2016. The fuzzy Approach to assessment of ANOVA results. In: Nguyen NT., Iliadis L., Manolopoulos Y., Trawiński B. (eds) Computational Collective Intelligence. ICCCI 2016. Lecture Notes in Computer Science, vol 9875. Springer, 260–268, DOI: 10.1007/978-3-319-45243-2_2410.1007/978-3-319-45243-2_24Open DOISearch in Google Scholar

Radek, N., Szczotok, A., Gądek-Moszczak, A., Dwornicka, R., Broncek, J., Pietraszek, J., 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Arch. Metall. Mater., 63, 2, 809-816, DOI: 10.24425/12240710.24425/122407Open DOISearch in Google Scholar

Radziszewska-Wolińska, J.M., Kaźmierczak, A., 2018. Fire properties of upholstery and fire resistance of the complete passenger Seat. Mater. Res. Proc. 5, 31-36.Search in Google Scholar

Radziszewska-Wolińska, J.M., Milczarek, D., 2018. Fire tests of non-metallic materials for walls and ceilings in rolling stock. Materials Research Proceedings, 5, 90-95, DOI: 10.21741/9781945291814-610.21741/9781945291814-6Open DOISearch in Google Scholar

Radziszewska-Wolińska, J.M., Radek, N., Pasieczyński, L., 2018. Fire properties of “anti-graffiti” coating systems for rolling stock. AUTOMOTIVE SAFETY 2018: 11th Int. Science and Technical Conf. Automotive Safety, IEEE, New York. DOI: 10.1109/AUTOSAFE.2018.837332910.1109/AUTOSAFE.2018.8373329Open DOISearch in Google Scholar

Scendo, M., Trela, J., Radek, N., 2014. Influence of laser power on the corrosive resistance of WC-Cu coating. Surface and Coatings Technology, 259, C, 401-407, DOI: 10.1016/j.surfcoat.2014.10.062.10.1016/j.surfcoat.2014.10.062Open DOISearch in Google Scholar

Singh, B. et al., 2016a. Feasibility studies of time-like proton electromagnetic form factors at PANDA at FAIR. The European Physical Journal A, 52, art. 325.10.1140/epja/i2016-16325-5Open DOISearch in Google Scholar

Singh, B. et al., 2016b. Study of doubly strange systems using stored antiprotons. Nuclear Physics A, 954, 323-340.Search in Google Scholar

Singh, B. et al., 2017. Feasibility study for the measurement of pi N transition distribution amplitudes at (P)over-barANDA in (P)over-barp -> J/psi pi(0). Physical Review D, 95(3), 25 p., art. 032003.Search in Google Scholar

Skrzypczak-Pietraszek, E., Pietraszek, J., 2009. Phenolic acids in in vitro cultures of Exacum affine Balf. f. Acta Biologica Cracoviensia. Series Botanica, 51, 62-62.Search in Google Scholar

Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy. Engineering in Life Sciences, 18, 287-297, DOI: 10.1002/elsc.20180000310.1002/elsc.201800003Open DOISearch in Google Scholar

Styrylska, T., Pietraszek, J., 1992. Numerical modeling of non-steady-state temperature-fields with supplementary data. Zeitschrift für angewandte Mathematik und Mechanik, 72, T537-T539.Search in Google Scholar

Szabracki, P., Lipiński, T., 2014. Influence of sigma phase precipitation on the intergranular corrosion resistance of X2CrNiMoN25-7-4 super duplex stainless steel. Metal 2014: 23rd Int. Conference Metallurgy and Materials. Tanger, Ostrava, 476 481.Search in Google Scholar

Ulewicz, M., Radzymińska-Lenarcik, E., 2011. Transport of metal ions across polymer inclusion membrane with 1-alkylimidazole. Physicochemical Problems of Mineral Processing, 46, 119-130.Search in Google Scholar

Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast Iron foundry. Metal 2013: 22nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931.Search in Google Scholar

Plan your remote conference with Sciendo