1. bookVolume 1 (2020): Issue 1 (December 2020)
Journal Details
License
Format
Journal
eISSN
2718-4978
First Published
09 Jul 2020
Publication timeframe
2 times per year
Languages
English
access type Open Access

Investigation of Residual Bearing Capacity of Inclined Sections of Damaged Reinforced Concrete Beams

Published Online: 13 Sep 2021
Volume & Issue: Volume 1 (2020) - Issue 1 (December 2020)
Page range: 14 - 26
Received: 07 May 2020
Accepted: 02 Jul 2020
Journal Details
License
Format
Journal
eISSN
2718-4978
First Published
09 Jul 2020
Publication timeframe
2 times per year
Languages
English
Abstract

The article reports on the results of the numerical and the laboratory tests to determine the effect of concrete damages near support areas in compressed zone of the reinforced concrete beams on their residual bearing capacity of inclined sections. According to the experimental plan, 15 single-span freely supported experimental samples with dimensions of 100×200×1200 mm made with different artificial damages within the shear span aν (1d, 2d, and 3d) were tested. The numerical test of prototypes was performed in software complex LIRA-SAPR 2017. The results of laboratory and numerical experiments showed good convergence regarding the bearing capacity, however, the nature of the fracture in samples B11-B14 did not match. Empirical - conducting laboratory experiments on samples using modern methods of measurement; numerical modelling – using software complex LIRA-SAPR 2017; analysis and statistical processing of the obtained research results; comparison of the obtained results; abstraction; generalization; deduction; formulation of the main conclusions and recommendations. The analysis found that the bearing capacity decreases with increased area of damage and shear span. Conducting the calculations in software complex LIRA-SAPR allows to predict the work elements and determine the bearing capacity with good accuracy, but in comparison with the real data there still are some differences in the character of destruction.

Keywords

Klymenko, Ye. (2010) Technical condition of buildings and structures, Odessa.Search in Google Scholar

Zoran, B. et. al. (2015), “Damage of concrete and reinforcement of reinforced-concrete”, Procedia Engineering, vol. 117, pp. 411-418.10.1016/j.proeng.2015.08.187Search in Google Scholar

Lu, Z., et. al. (2015), “A numerical approach for calculating the mechanical performance of the fire-damaged reinforced concrete continuous beams”, Tongji Daxue Xuebao, Journal of Tongji University, Vol. 43(1), pp. 16-26.Search in Google Scholar

Ou, Z.-M., and Sun, L. (2017), “Flexural fatigue-life reliability of frost-damaged concrete”, Zhejiang Daxue Xuebao (Gongxue Ban), Journal of Zhejiang University (Engineering Science), Vol. 51, pp. 1074-1081 and 1103.Search in Google Scholar

Blikharskyi, Z. (2011), Reinforced Concrete Structures in Aggressive Environments and for Load and Reinforcement Actions, Publishing House of Lviv Polytechnic.Search in Google Scholar

BS EN 1992-1-1:2004 - Design of concrete structures. General rules and rules for buildings, The European Union Per Regulation 305/2011, Directive 98/34/EC, Directive 2004/18/ECSearch in Google Scholar

Klymenko, Ye., and Arez M., (2017), Capacity of damaged reinforced concrete beams, OSACEA, Odessa.Search in Google Scholar

Orešković, et. al. (2018), “Analysis of damaged concrete columns of circular cross-section”, Tehnički vjesnik, Vol. 25(2), pp. 337-343.Search in Google Scholar

Klymenko, Ye., Chtrnieva, O., Ismael, A. (2013), “Tests results of the damaged T-section beams”, Varaždin, Technical journal, Scientific professional journal of Polytechnic of Varaždin, Vol. 4, pp. 344-346.Search in Google Scholar

Talbot A. N. (1909), “Tests of Reinforced Concrete Beams: Resistance of web Stresses”, University of Illinois, Engineering Experiment Station, Vol. 29, pp. 17–19.Search in Google Scholar

Johnson, R.P., Tait, C.J. (1981), “The strength in combined bending and tension of concrete beams with externally bonded reinforcing plates”, Building and Environment, Vol. 16 (4), pp. 287–299.10.1016/0360-1323(81)90007-XSearch in Google Scholar

Klymenko, Ye.V., Boiadzhi. A.O., Polianskyi, K.V., (2019) “About the experimental investigation of residual bearing capacity of damaged reinforced concrete beams inclined sections”, Bulletin of Odessa State Academy of Civil Engineering and Architecture collection of scientific works, Vol. 75, pp. 37–43.10.31650/2415-377X-2019-75-37-43Search in Google Scholar

Pavlikov, A.M., and Boyko, O.V., (2011), “Determination of the angle of the neutral line in the sections of obliquely bent reinforced concrete elements taking into account the nonlinear properties of concrete based on diagrams of its state”, Resource-saving materials, structures, buildings and structures, Rivne, Vol. 21., pp. 128–132.Search in Google Scholar

Dorofeev, V. S., et. al. (2010), On the influence of structural factors on the bearing capacity of flexible concrete elements”, Bulletin of Odessa State Academy of Civil Engineering and Architecture collection of scientific works, Vol. 39, (1), pp. 186–199.Search in Google Scholar

Zalesov, A.S., et. al. (2002), “Calculation of the strength of reinforced concrete structures under different load occurs on new regulations”, Concrete and reinforced concrete. Vol.3., pp. 10–13.Search in Google Scholar

Voskobiynyk, O.P., et. al. (2011), Experimental researches of reinforced concrete beams with defects and damages causing oblique bending, Collection of scientific works (branch mechanical engineering, construction), Poltava, Vol. 1 (29). pp. 87–92.Search in Google Scholar

Garkava, O.V., and Barilyak, B.A., (2018), “Calculation of bearing capacity of reinforced concrete crane girders at oblique bending”, Collection of scientific works of the Ukrainian State University of Railway Transport. Vol. 175, pp. 77–83.Search in Google Scholar

Karpyuk, V.M., et. al.,(2016), Influence of constructive factors and factors of external action on bearing capacity of beam designs at a small cycle loading, Bulletin of Odessa State Academy of Civil Engineering and Architecture collection of scientific works, Vol. 61. pp. 130-136.Search in Google Scholar

Voskobiynyk, P.P.,et. al.,(2016), “Experimental researches of restoration of operational properties of reinforced concrete beams for the purpose of their repeated application”, Resource-saving materials, designs, buildings and buildings, Poltava, Vol. 32., pp. 451–458.Search in Google Scholar

Vegera, P.I., (2016), Load-bearing capacity of inclined sections of reinforced concrete beams reinforced with composite materials under load, Lviv, 145 p.Search in Google Scholar

Bondarenko, V.M., and Ivakhnyuk, V.A., (2003), “Fragments of the theory of power resistance of concrete damaged by corrosion”, Concrete and reinforced concrete, Vol. 5, pp. 42–46.Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo