<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The solved area of research is the slab in interaction with the subsoil, where the goal is numerical modeling of the problem using a 3D computational model and nonlinear analysis. Specifically, the case of two experiments with a slab with centric and eccentric loading is solved. The performed experiments are used after for numerical modelling when a comprehensive set of laboratory tests of mechanical properties of fiber-reinforced concrete is also performed. Specifically, compressive strength, modulus of elasticity, splitting tensile test and bending tensile test were performed. The performed experiments are evaluated using 2D sections and 3D approximation surfaces, which are then used for load-displacement diagrams. Numerical modeling is based on nonlinear analysis and the use of the finite element method. The computational model use isoparametric finite elements. Based on the performed experiments and numerical modeling, the evaluation of the solved task is performed.</p>
</abstract>

The solved area of research is the slab in interaction with the subsoil, where the goal is numerical modeling of the problem using a 3D computational model and nonlinear analysis. Specifically, the case of two experiments with a slab with centric and eccentric loading is solved. The performed experiments are used after for numerical modelling when a comprehensive set of laboratory tests of mechanical properties of fiber-reinforced concrete is also performed. Specifically, compressive strength, modulus of elasticity, splitting tensile test and bending tensile test were performed. The performed experiments are evaluated using 2D sections and 3D approximation surfaces, which are then used for load-displacement diagrams. Numerical modeling is based on nonlinear analysis and the use of the finite element method. The computational model use isoparametric finite elements. Based on the performed experiments and numerical modeling, the evaluation of the solved task is performed.

Numerical Modeling and Diagnostic of FRC Slab under Centric and Eccentric Load

Department of Structures, Faculty of Civil Engineering

Civil and Environmental Engineering

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Numerical Modeling and Diagnostic of FRC Slab under Centric and Eccentric Load"}

The solved area of research is the slab in interaction with the subsoil, where the goal is numerical modeling of the problem using a 3D computational model and...

Numerical Modeling and Diagnostic of FRC Slab under Centric and Eccentric Load

Published Online: Jun 29, 2022

Page range: 17 - 28

DOI: https://doi.org/10.2478/cee-2022-0002

Keywords
Slab, Fiber-reinforced concrete, Experiment, Tensile strength, Numerical modelling

© 2022 Zuzana Marcalíková et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Numerical Modeling and Diagnostic of FRC Slab under Centric and Eccentric Load

Published Online: Jun 29, 2022

Page range: 17 - 28

DOI: https://doi.org/10.2478/cee-2022-0002

KeywordsSlab, Fiber-reinforced concrete, Experiment, Tensile strength, Numerical modelling

© 2022 Zuzana Marcalíková et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Keywords
Slab, Fiber-reinforced concrete, Experiment, Tensile strength, Numerical modelling