This paper is focussed on the investigation of the strengthened column by steel-fibre-reinforced (SFR) and carbon fibre-reinforced polymer (CFRP) on a part or a whole of the length of the column under axial force, and to obtain the effective length, which is responsible for the increasing of the ability of the column to resist buckling. Seven samples were designed as slender reinforced columns with dimensions of 2000 mm length and cross-sections of 120 mm x 60 mm. It was shown that the strengthening of the middle half of the column length by SFR gave an ultimate load similar to the strengthening of the whole column with same material. Also, it was found that the column strengthened by SFR increased its ultimate load by 42.6 %, 42.1 % and 33.3 % for strengthened lengths of dimensions