[
Berge J., Introduction to Fieldbuses for Process Control, Copyright © 2002 ISA - The Instrumentation, Systems, and Automation Society, ISA.
]Search in Google Scholar
[
Chun-ming Z., Ru-jiang G., Dan-li W., Yan-min X., Chen Min, Jin Cheng, The Design of Bulk Carrier Cargo Holds State Integrated Monitoring System, School of Navigation, Wuhan University of Technology, Wuhan, China, MATEC Web of Conferences 61, 07014 (2016).10.1051/matecconf/20166107014
]Search in Google Scholar
[
Dudojc B., Mindykowski J., Analysis of Selected Properties of Measurement Channels Used in Hazardous Areas of Ships, IEEE Instrumentation and Measurement Technology Conference, Brussels, Belgium, 1996, IMTC Proceedings, Volume II, 826-831.
]Search in Google Scholar
[
Dudojc B., Mindykowski J., Checking Current Analog Measurement Channels, Proc. of the IMEKO TC-4 Conference, Vienna, 2000, 175-180.
]Search in Google Scholar
[
Dudojc B., Mindykowski J., New Approach to Analysis of Selected Measurement and Monitoring Systems Solutions in Ship Technology, Sensor 2019 (8), 1775.10.3390/s19081775651509231013903
]Search in Google Scholar
[
Felser M., PROFIBUS Manual, Edition 1.2.4 published at 25. August 2017.
]Search in Google Scholar
[
Frantloviu M.P., Jovanov V.J., MiljkoviüB L.J., Intelligent Industrial Transmitters of Pressure and Other Process Parameters, Telfor Journal, Vol. 1, No. 2, 2009.
]Search in Google Scholar
[
Gingerich K., Device Spacing on RS-485 Buses, Texas Instruments Analog Applications Journal, 2Q 2006.
]Search in Google Scholar
[
Kugelstadt T., The RS-485 Design Guide, Application Report SLLA272C–February 2008–Revised May 2021, Texas Instruments, Copyright © 2021, Texas Instruments Incorporated.
]Search in Google Scholar
[
Liptak B.G., Halit E., Instrument Engineers’ Handbook, Process Software and Digital Networks Volume III, 4th Edition, International Society of Automation, CRC Press Taylor and Francis Group © 2012, 578-635.
]Search in Google Scholar
[
Liptak B.G, Instrument Engineers’ Handbook, Process and Control Optimization Volume II, 4th Edition, International Society of Automation, CRC Press Taylor and Francis Group © 2006, 561-574, 690-692, 780-784
]Search in Google Scholar
[
Liptak B.G., Instrument Engineers’ Handbook, Process Measurement and Analysis Volume I, 4th Edition, International Society of Automation, CRC Press Taylor and Francis Group © 2003, 549-55410.1201/9781420064025
]Search in Google Scholar
[
Liptak B.G., Vinczel K., Instrument and Automation Engineers’ Handbook, Measurement and Safety Volume I, 5th Edition, International Society of Automation, CRC Press Taylor and Francis Group © 2017, 1171-1177, 1883-1888
]Search in Google Scholar
[
Mackay S., Wright E., Park J., Practical Data Communications for Instrumentation and Control, 1st edition, 11 June 2003, 3-67, 205-238, 240-287.
]Search in Google Scholar
[
Marais H., RS-485/RS-422 Circuit Implementation Guide, AN-960 Application Note, 2008.
]Search in Google Scholar
[
Mehta B.R., Reddy Y.J., Industrial Process Automation Systems Design and Implementation, Butterworth-Heinemann is an imprint of Elsevier, Copyright © 2015 Elsevier Inc.16-20, 306-339, 365-415.
]Search in Google Scholar
[
Snyder D.A., Understanding 4 to 20 mA Loops, PDH Course E271, PE, 2008.
]Search in Google Scholar
[
Sonnenberg J., Serial Communications RS232, RS485, RS422, Copyright 2018.
]Search in Google Scholar
[
Verhappen I., Pereira A., Foundation Fieldbus, Fourth Edition, International Society of Automation; 4th edition (February 29, 2012)
]Search in Google Scholar
[
*** Modbus IDA, Modbus Application Protocol Specification, V1.1b, Modbus IDA, December 28, 2006.
]Search in Google Scholar
[
*** Modbus IDA, Modbus Over Serial Line Specification and Implementation Guide V1.02, Modbus.org, Dec 20, 2006.
]Search in Google Scholar
[
*** PROFIBUS & PROFINET International (PI), PROFIBUS System Description Technology and Application, Version April 2016.
]Search in Google Scholar