<abstract xmlns="http://www.w3.org/1999/xhtml">

This paper presents the torque focused design optimization and analysis of coaxial magnetic gears parameters when implementing some constructive and assembly solutions.
A theoretical investigation of several proposed solutions for mounting the permanent magnets on the surfaces of inner and outer rotors is held. The mounting of magnetic pieces on outer and inner rotors is considered as the benchmark models of magnetic gears do not display the actual torque capability provided by their constructed versions.
Design, geometry, and assembly of magnetic flux modulator are studied to determine some feasible solutions.
The impact of above-mentioned parameters on the torque capability are then studied and calculated with the help of finite element method (FEA) and the results are summarized and presented.
</abstract>

This paper presents the torque focused design optimization and analysis of coaxial magnetic gears parameters when implementing some constructive and assembly solutions.
A theoretical investigation of several proposed solutions for mounting the permanent magnets on the surfaces of inner and outer rotors is held. The mounting of magnetic pieces on outer and inner rotors is considered as the benchmark models of magnetic gears do not display the actual torque capability provided by their constructed versions.
Design, geometry, and assembly of magnetic flux modulator are studied to determine some feasible solutions.
The impact of above-mentioned parameters on the torque capability are then studied and calculated with the help of finite element method (FEA) and the results are summarized and presented.

Analysis of Some Design Parameters and Constructive Solutions for Coaxial Magnetic Gears

“Gheorghe Asachi” Technical University of Iași

Department of Machine Manufacturing Technology

Department of Industrial Engineering and Management Sibiu

Bulletin of the Polytechnic Institute of Iași. Machine constructions Section

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This paper presents the torque focused design optimization and analysis of coaxial magnetic gears parameters when implementing some constructive and assembly...

Analysis of Some Design Parameters and Constructive Solutions for Coaxial Magnetic Gears

Published Online: Oct 13, 2023

Page range: 95 - 108

Received: Jul 13, 2023

Accepted: Jul 31, 2023

DOI: https://doi.org/10.2478/bipcm-2023-0018

Keywords
magnetic gear, design parameters, constructive parameters, torque capability, optimisation

© 2023 Gheorghe Galmadi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Analysis of Some Design Parameters and Constructive Solutions for Coaxial Magnetic Gears

Published Online: Oct 13, 2023

Page range: 95 - 108

Received: Jul 13, 2023

Accepted: Jul 31, 2023

DOI: https://doi.org/10.2478/bipcm-2023-0018

Keywordsmagnetic gear, design parameters, constructive parameters, torque capability, optimisation

© 2023 Gheorghe Galmadi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Keywords
magnetic gear, design parameters, constructive parameters, torque capability, optimisation