<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Electrochemical machining relies on the electrolysis phenomenon, this being characterized by the chemical reaction between the workpiece material and an electrolyte solution. Both the electrode and the workpiece materials are connected into an electric circuit, charged by a direct current electric energy source. The workpiece is used to get some complex forms of cavities into parts of electrically conductive materials or other hard conductive materials, which could not be processed efficiently by the other means. This paper presents the results of some research related to the development of an equipment concept that could highlight the variation of some output parameters of the process in function of the value of the input factors in the process. It has opted to create a device for studying electrochemical erosion, where different substances, with a direct current source with variable adjustment. Taking into account the experimental results when using different materials for the workpiece, different materials for the tool electrode, many working electrolyte type substances, and changing the values of the electrical parameters, results necessary for a relevant conclusion could be obtained.</p>
</abstract>

Electrochemical machining relies on the electrolysis phenomenon, this being characterized by the chemical reaction between the workpiece material and an electrolyte solution. Both the electrode and the workpiece materials are connected into an electric circuit, charged by a direct current electric energy source. The workpiece is used to get some complex forms of cavities into parts of electrically conductive materials or other hard conductive materials, which could not be processed efficiently by the other means. This paper presents the results of some research related to the development of an equipment concept that could highlight the variation of some output parameters of the process in function of the value of the input factors in the process. It has opted to create a device for studying electrochemical erosion, where different substances, with a direct current source with variable adjustment. Taking into account the experimental results when using different materials for the workpiece, different materials for the tool electrode, many working electrolyte type substances, and changing the values of the electrical parameters, results necessary for a relevant conclusion could be obtained.

Initial Considerations in the Study of the Manufacturing Process by Electrochemical Machining

“Gheorghe Asachi” Technical University of Iaşi

Bulletin of the Polytechnic Institute of Iași. Machine constructions Section

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Electrochemical machining relies on the electrolysis phenomenon, this being characterized by the chemical reaction between the workpiece material and an...

Initial Considerations in the Study of the Manufacturing Process by Electrochemical Machining

Published Online: Feb 23, 2022

Page range: 89 - 96

Received: Oct 01, 2021

Accepted: Dec 14, 2021

DOI: https://doi.org/10.2478/bipcm-2021-0026

Keywords
unconventional technologies, electrochemical erosion, processing equipment, input factors, output parameters

© 2021 Daniela Gabriela Ciobanu Iorgoaia, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Initial Considerations in the Study of the Manufacturing Process by Electrochemical Machining

Published Online: Feb 23, 2022

Page range: 89 - 96

Received: Oct 01, 2021

Accepted: Dec 14, 2021

DOI: https://doi.org/10.2478/bipcm-2021-0026

Keywordsunconventional technologies, electrochemical erosion, processing equipment, input factors, output parameters

© 2021 Daniela Gabriela Ciobanu Iorgoaia, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Keywords
unconventional technologies, electrochemical erosion, processing equipment, input factors, output parameters