Corrosion Resistance of Coatings Produced by Spraying Powders Under a Laser Beam in a Saline Environment NaCl 3% by the Electrochemical Method

[1] Pelletier, J. M., Sahour, M. C., Pilloz, M., and Vannes, A. B., “Influence of processing conditions on geometrical features of laser claddings obtained by powder injection”, Journal of Materials Science, vol. 28, pp. 5184-5188, 1993.Search in Google Scholar

[2] Sallamand, P., “Surface alloy and coatings produced under a laser beam by spraying powder on an aluminum-based substrate: microstructural, mechanical and tribological characterization”, Thesis, INSA Lyon, 1994.Search in Google Scholar

[3] Sexton, C. L., Byrne, G., and Walkins, K.G., “Alloy development by laser cladding: an overview”, Journal of Laser Applications, vol. 13, 2-11, 2001.10.2351/1.1340337Search in Google Scholar

[4] Hidouci, A., Pelletier, J. M., Ducoin, F., Dezert, D., El Guerjouma, R., “Microstructural and mechanical characteristics of laser coatings”, Surface and Coatings Technology, vol. 123, pp. 17-23, 2000.10.1016/S0257-8972(99)00394-1Search in Google Scholar

[5] Pei, Y. T., Ouyang, J. H., and Lei, T.C., “Microstructure of bonding zones in laser-clad Ni-alloy-based composite coatings reinforced with various ceramic powders”, Surf. Metall. Mater. Trans, vol. 27A2, pp. 391-400, 1996.10.1007/BF02648416Search in Google Scholar

[6] Sexton, C. L., Byrne, G., and Walkins, K. G., “Alloy development by laser cladding: An overview”, Journal of Laser Applications, vol. 13, pp. 2-11, 2001.10.2351/1.1340337Search in Google Scholar

[7] Safonov, A. N., and Aleksenko, S., “Effect of laser treatment on the wear resistance of steels”, Metal Science and Heat treatment, vol. 40, pp. 399-401, 1998.10.1007/BF02468246Search in Google Scholar

[8] Ajao, J., and Hamar-Thibault, S., “Influence of additions on the solidification behaviour of Ni-B alloys- crystallography of Ni-Ni3B eutectic”, Journal of Materials Science, 1988.10.1007/BF01154022Search in Google Scholar

[9] De Oliveira, U., Ocelik, V., and De Hosson, J. T. M., “Analysis of coaxial laser cladding processing conditions JTM”, Surface & Coatings Technology: 197.2-3, 127-136 10. vol. 23, pp. 1112–1125, 2005.Search in Google Scholar

[10] Boussaha, E. H., and Al., “Study of powder particle size effect on microstructural and geometrical features of laser claddings using response surface methodology RSM”, Electrical and Mechanical Engineering, Acta Universitatis Sapientiae, vol. 11, pp. 99-116, 2019.10.2478/auseme-2019-0009Search in Google Scholar

[11] Da Rocha, J., Gomes, J., D’Elia, E., “Aqueous Extracts of Mango and Orange Peel as Green Inhibitors for Carbon Steel in Hydrochloric Acid Solution”, Mater Research, 17:1581-1587. https://doi.org/10.1590/1516-1439.285014, 2014.10.1590/1516-1439.285014Search in Google Scholar

[12] Aounitia, A., Elmsellema, H., Tighadouinia, S., and Al. “Schiff’s base derived from 2-acetyl thiophene as corrosion inhibitor of steel in acidic medium”, https://doi.org/10.1016/j.jtusci.11.008, 2015.Search in Google Scholar

[13] Scully, J. C., “Corrosion Protection, Fundamental principles”, Editor: Masson, Materials Science Collection, 208p., Released July 1995.Search in Google Scholar

[14] Monsempès. T., “Corrosion of steel by oils containing naphthenic acids: search for a method to measure the instantaneous rate of corrosion”, Materials Doctoral School of Lyon, Doctoral thesis, France, 2000.Search in Google Scholar

[15] Ntienoue, J., “Study, characterization and electrochemical monitoring of the surface of 254 SMO stainless steel in natural Amazonian aqueous media”, Doctoral thesis, University of the Antilles and Guyana, 2013.Search in Google Scholar

[16] Gabrielli, C., “Electrochemical methods Impedance measurements”, Edition, Techniques of Engineering, Paris, France, 1994.Search in Google Scholar

[17] Pergue, D., “Application of power lasers. Obtaining out of equilibrium states by surface reflections of metal surfaces”, Thesis, INPG, Grenoble, 1987.Search in Google Scholar

[18] Laribi, M., Mesrati, N., Laracine, M., Vannes, A. B., Thereux, D., “Experimental determination of residual stresses within structures developed by thermal spraying”, Materials & Techniques, N°9-10, pp. 15-21, 2001.10.1051/mattech/200189090015Search in Google Scholar

[19] De Mello, J. D. B., et al., “Abrasion mechanisms of white cast iron I : Influence of the metallurgical structure of molybdenum white cast irons”, Materials Sciences and Engineering, Vol. 73, pp. 203-213, 1985.10.1016/0025-5416(85)90309-XSearch in Google Scholar

[20] Olson, D., “Prediction of austenitic weld metal microstructure and properties”, Materials Science, pp. 281-295, 1985.Search in Google Scholar

[21] Pacquentin, W., “Contribution to the study of the physico-chemical properties of surfaces modified by laser treatment. Application to improving the resistance to localized corrosion of stainless steels”, Materials, University of Bourgogne, pp. 64-84, 2011.Search in Google Scholar

[22] Anoune, I., “Corrosion resistance of nickel-alumina composite coatings on different substrates”, Thesis, University of Batna, pp. 55-64, 2014.Search in Google Scholar