Abrasive Water Jet Cutting of Stainless-Steel Optimization by Orthogonal Array Approach

1. L. Kukiełka et al., “Analysis of the States of Deformation and Stress in the Surface Layer of the Product after the Burnishing Cold Rolling Operation,” Materials Science Forum, vol. 862 (2016), pp. 278–287.Search in Google Scholar

2. R. Patyk et al., “Experimental and numerical researches of duplex burnishing process in aspect of achieved productive quality of the product,” AIP Conference Proceedings, vol. 1960, no. 1, (2018) p. 070021.Search in Google Scholar

3. A. Perec, “Environmental Aspects of Abrasive Water Jet Cutting,” Annual Set The Environment Protection - Rocznik Ochrona Srodowiska, vol. 20 (2018), pp. 258–274.Search in Google Scholar

4. J. Valíček, S. Hloch, and D. Kozak, “Surface geometric parameters proposal for the advanced control of abrasive waterjet technology,” The International Journal of Advanced Manufacturing Technology, vol. 41, no. 3–4, (2009) pp. 323–328.10.1007/s00170-008-1489-2Open DOISearch in Google Scholar

5. A. Perec, “Experimental research into alternative abrasive material for the abrasive water jet cutting of titanium,” Int. J. Adv. Manuf. Technol., vol. 97, no. 1–4, (2018), pp. 1529–1540.Search in Google Scholar

6. P. D. Unde, M. D. Gayakwad, N. G. Patil, R. S. Pawade, D. G. Thakur, and P. K. Brahmankar, “Experimental Investigations into Abrasive Waterjet Machining of Carbon Fiber Reinforced Plastic,” Journal of Composites, 2015. [Online]. Available: https://www.hindawi.com/journals/jcomp/2015/971596/. [Accessed: 06-Jul-2018].10.1155/2015/971596Search in Google Scholar

7. D. G. Alberts and M. Hashish, “Evaluation of submerged high-pressure waterjets for deep ocean applications,” in Proceedings of the Sixth (1996) International Offshore and Polar Engineering Conference, Vol I, 1996, J. S. Chung, B. M. Das, and J. Roesset, Eds. Cupertino: International Society Offshore& Polar Engineers, (1996), pp. 46–50.Search in Google Scholar

8. J. Foldyna, P. Martinec, and L. Sitek, “Testing of mineral typed of abrasives for abrasive water jet cutting,” in 2001 WJTA American Waterjet Conference. Minneapolis, Minnesota, USA, 2001, Paper 22.Search in Google Scholar

9. S. Hloch and J. Valicek, “Significance of Barton Garnet and Olivine Evaluation at Abrasive Waterjet Cutting by Factor Analysis,” Nonconventional Technologies Review, no. 4, (2007), pp. 25–30.Search in Google Scholar

10. D. Kinik, B. Gánovská, S. Hloch, P. Monka, K. Monková, and Z. Hutyrová, “On-line monitoring of technological process of material abrasive water jet cutting | On-line praćenje tehnološkog postupka rezanja materijala abrazivnim vodenim mlazom,” Techničky vjesnik, vol. 22, no. 2, (2015), pp. 351–357.Search in Google Scholar

11. M. Tavodová, “The surface quality of materials after cutting by abrasive water jet evaluated by selected methods,” Manufacturing Technology, vol. 13, no. 2, (2013), pp. 236–241.Search in Google Scholar

12. V. Sharma, S. Chattopadhyaya, and S. Hloch, “Multi response optimization of process parameters based on Taguchi-Fuzzy model for coal cutting by water jet technology,” International Journal of Advanced Manufacturing Technology, vol. 56, no. 9–12, (2011), pp. 1019–1025.Search in Google Scholar

13. A. Perec, “Abrasive suspension water jet cutting optimization using orthogonal array design,” Procedia Engineering, vol. 149, (2016), pp. 366–373.Search in Google Scholar

14. A. Perec, F. Pude, M. Kaufeld, and K. Wegener, “Obtaining the Selected Surface Roughness by Means of Mathematical Model Based Parameter Optimization in Abrasive Waterjet Cutting,” Strojniški vestnik - Journal of Mechanical Engineering, vol. 63, no. 10, (2017), pp. 606–613.Search in Google Scholar

15. P. Martinec, J. Foldyna, L. Sitek, J. Ščučka, and J. Vašek, “Abrasives for AWJ cutting. INCO-COPERNICUS,” Institute of Geonics, Ostrava, 2002, ISBN 80-86407-02-0, 2002.Search in Google Scholar

16. A. Perec, “Investigation of Limestone Cutting Efficiency by the Abrasive Water Suspension Jet,” in Advances in Manufacturing Engineering and Materials: Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2018), 18–22 June, 2018, Nový Smokovec, Slovakia, S. Hloch, D. Klichová, G. M. Krolczyk, S. Chattopadhyaya, and L. Ruppenthalová, Eds. Springer International Publishing, 2019.Search in Google Scholar

17. H. Hocheng and M. Y. Hsu, “Erosion wear of stainless steel by abrasives entrained in a water jet,” Arabian Journal for Science and Engineering, vol. 25, no. 2, (2000) pp. 187–202.Search in Google Scholar

18. P. Hreha, S. Hloch, and V. Peržel, “Analysis of acoustic emission recorded during monitoring of abrasive waterjet cutting of stainless steel AISI 309,” Tehnički vjesnik, vol. 19, no. 2, (2012) pp. 355–359.Search in Google Scholar

19. S. B. Supriya and S. Srinivas, “Machinability Studies on Stainless Steel by Abrasive Water Jet - Review,” Materials Today: Proceedings, no. 5, (2018), pp. 2871–2876.10.1016/j.matpr.2018.01.079Open DOISearch in Google Scholar