Study Regarding the Optimal Milling Parameters for Finishing 3D Printed Parts from ABS and PLA Materials
and
Dec 26, 2018
About this article
Published Online: Dec 26, 2018
Page range: 66 - 72
DOI: https://doi.org/10.2478/aucts-2018-0009
Keywords
© 2018 Pămărac Răzvan Gabriel et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
In this paper we proposed to identify the optimum milling parameter required for finishing processes performed on 3Dprinted parts from ABS and PLA materials. We have identified the optimum milling parameters for a constant spindle speed of 3500 rot/min for face milling and profile contouring operations with different tools diameters. The study was performed on 3D printed specimens from ABS and PLA materials.