Thermal and Mechanical Properties of Materials with Adverse Effect on the Environment

AKYUZ, O. – KAYA, N. – CAN, M. – DEMIC, S. 2019. Mechanical properties of quartz-added PP based composites produced by high speed thermo-kinetic mixer. In Acta Physica Polonica A, vol. 135, no. 5, pp. 1045–1049. DOI: https://doi.org/10.12693/APhysPolA.135.1045Search in Google Scholar

ASTM C 1259-01: 2001. Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration. Standard Documents, Philadelphia, USA.Search in Google Scholar

HILARY, L. N. – SULTANA, S. – ISLAM, Z. – SARKER, K. U. – ABEDIN, J. – HAQUE, M. M. 2021. Recycling of waste poly(vinyl chloride) fill materials to produce new polymer composites with propylene glycol plasticizer and waste sawdust of Albizia lebbeck wood. In Current Research in Green and Sustainable Chemistry, vol. 4., article no. 100221. DOI: https://doi.org/10.1016/j.crgsc.2021.100221Search in Google Scholar

KAZEMI, M. – FINI, E. H. 2022. State of the art in the application of functionalized waste polymers in the built environment. In Resources, Conservation and Recycling, vol. 177, article no. 105967. DOI: https://doi.org/10.1016/j.resconrec.2021.105967Search in Google Scholar

LI, H. Y. – TAN, Y. Q. – ZHANG, L. – ZHANG, Y. X. – SONG, Y. H. – YE, Y. – XIA, M. S. 2012. Bio-filler from waste shellfish shell: Preparation, characterization, and its effect on the mechanical properties on polypropylene composites. In Journal of Hazardous Materials, vol. 217–218, pp. 256–262. DOI: https://doi.org/10.1016/j.jhazmat.2012.03.028Search in Google Scholar

LI, J. 2009. The research on the interfacial compatibility of polypropylene composite filled with surface treated carbon fiber. In Applied Surface Science, vol. 255, no. 20, pp. 8682–8684. DOI: https://doi.org/10.1016/j.apsusc.2009.06.053Search in Google Scholar

LIMANI, H. – MANSSOURI, I. – CHERKAOUI, K. – KHALDOUN, A. 2020. Study of the suitability of unfired clay bricks with polymeric HDPE & PET wastes additives as a construction material. In Journal of Building Engineering, vol. 27, article no. 100956. DOI: https://doi.org/10.1016/j.jobe.2019.100956Search in Google Scholar

MIRANDA, L. F. – PEREIRA, N. C. – FALDINI, S. B. – MASSON, T. J. – de ANDRADE e SILVA, L. G. – SILVEIRA, L. H. 2009. Effect of ionizing radiation on polypropylene composites reinforced with coconut fibers. In 2009 International Nuclear Atlantic Conference – INAC 2009. Rio de Janeiro: ABEN, pp. 1–9. ISBN 978-85-99141-03-8.Search in Google Scholar

PFAENDNER, R. 2022. Restabilization – 30 years of research for quality improvement of recycled plastics review. In Polymer Degradation and Stability, vol. 203, article no. 110082. DOI: https://doi.org/10.1016/j.polymdegradstab.2022.110082Search in Google Scholar

RAJAK, D. K. – PAGAR, D. D. – KUMAR, R. – PRUNCU, C. 2019. Recent progress of reinforcement materials: a comprehensive overview of composite materials. In Journal of Materials Research and Technology, vol. 8, no. 6, pp. 6354–6374. DOI: https://doi.org/10.1016/j.jmrt.2019.09.068Search in Google Scholar

ROSATO, D. V. – ROSATO, D. V. – ROSATO, M. V. 2004. Plastic Product Material and Process Selection handbook. Amsterdam : Elsevier Science, 618 pp. ISBN 978-1-85617-431-2. DOI: https://doi.org/10.1016/B978-1-85617-431-2.X5000-2Search in Google Scholar

ŠOTNAR, M. – VITÁZEK, I. – MAREČEK, J. – BURG, P. – KRČÁLOVÁ, E. – DARNADYOVÁ, K. – MAŠÁN, V. 2021. Comparison of ash content in vineyard pruning residues from Moravian region. In Acta Technologica Agriculturae, vol. 24, no. 2, pp. 79–83. DOI: https://doi.org/10.2478/ata-2021-0013Search in Google Scholar

VYAZOVKIN, S. – CHRISSAFIS, K. – DI LORENZO, M. L. – KOGA, N. – PIJOLAT, M. – RODUIT, B. – SBIRRAZZUOLI, N. – SUNOL, J. J. 2014. ICTAC Kinetics Committee recommendations for collecting experimental thermal analysis data for kinetic computations. In Thermochimica Acta, vol. 590, pp. 1–23. DOI: https://doi.org/10.1016/j.tca.2014.05.036Search in Google Scholar