1. bookVolume 16 (2019): Issue 2 (December 2019)
Journal Details
License
Format
Journal
eISSN
2668-4217
First Published
30 Jul 2019
Publication timeframe
2 times per year
Languages
English
access type Open Access

The Effect of Squeeze Pin Dimension and Operational Parameters on Material Homogenity of Aluminium High Pressure Die Cast Parts

Published Online: 21 Dec 2019
Volume & Issue: Volume 16 (2019) - Issue 2 (December 2019)
Page range: 7 - 12
Journal Details
License
Format
Journal
eISSN
2668-4217
First Published
30 Jul 2019
Publication timeframe
2 times per year
Languages
English
Abstract

The present paper is an experimental study on the squeeze pin effect on the high pressure die cast aluminium parts, as a way of improvement of material homogenity on various and big wall thickness castings. Squeeze is used in high pressure die casting technology for optimizing homogenity of big wall thicknesses of die cast parts working as structural, mechanical and hydraulic components, made of different aluminium alloys such AlSi alloys. The objective of this research is to highlight the primary and secondary effects of squeezing on the structural homogenity of high pressure die cast aluminium parts, as well as the dependence of the effects on the squeeze pin dimensions and the operating parameters.

Keywords

[1] Bellisario, D., Boschetti, A., Constanza, G., Tata Maria, E., Quadrini, F., and Santo, L. (2012), Squeeze Casting of Al-Si Alloys, in Recent Researches in Metallurgical Engineering - From Extraction to Forming, Ed. Mohammad Nusheh, InTech Open, pp. 161-186.Search in Google Scholar

[2] Reikher, A., Barkhudarov, M.R. (2007), Casting: An analytical approach, in Series: Engineering Materials and Processes, Ed. Springer-Verlag London.Search in Google Scholar

[3] Adamane, A.R., Arnberg, L., Fiorese, E. et al. (2015), Influence of Injection Parameters on the Porosity and Tensile Properties of High-Pressure Die Cast Al-Si Alloys: A Review, International Journal of Metalcasting, vol. 9(1), pp. 43-53.Search in Google Scholar

[4] Dong, X., Yang, H., Zhu, X, Ji, S.,(2019), High strength and ductility aluminium alloy processed by high pressure die casting, Journal of Alloys and Compounds, vol. 773, pp. 86-96.Search in Google Scholar

[5] Jiao, X.Y, et. Al, (2019), Influence of slow-shot speed on PSPs and porosity of AlSi17Cu2.5 alloy during high pressure die casting, Journal of Materials Processing Technology, vol. 268, pp. 63-69.Search in Google Scholar

[6] Apparao, K.c., Birru, A.K, (2017), Optimization of Die casting process based on Taguchi approach, Materials Today, vol. 4(2A), pp.1852-1859.Search in Google Scholar

[7] Jahangiri, A., Marashi, S.H.P., Mohammadaliha, M, Ashofte, V., (2017) The effect of pressure and pouring temperature on the porosity, microstructure, hardness and yield stress of AA2024 aluminum alloy during the squeeze casting process, Journal of Materials Processing Technology, vol. 245, pp. 1-6.Search in Google Scholar

[8] Battaglia, E., Bonollo, F., Timelli, G., Fiorese, E., Kral, G., (2016), Correlation between process, microstructure and properties in high pressure die casting aluminium-silicon alloys, Advances in Materials and Processing Technologies, vol. 3(1), pp. 111-124.Search in Google Scholar

[9] Peti, F., Grama, L., (2011), Analyse of the possible causes of porosity type defects in aluminium high pressure die cast parts, Scientific Bulletin of the „Petru Maior” University of Târgu Mureş, vol. 8 (XXV), no. 1, pp. 41-44.Search in Google Scholar

[10] Peti, F., Grama L., (2012), Researches concerning constructive and technological improvements of automotive gearbox suspension brackets, Proceedings of the 6th Interdisciplinarity in Engineering International Conference InterEng-2012, “Petru Maior” University Press, pp. 87-92.Search in Google Scholar

[11] SR EN 1706 – Aluminium and aluminium alloys, (2000).Search in Google Scholar

[12] DIN 1688 – Tolerances for pressure die casting, (1986).Search in Google Scholar

[13] ASTM E505 - Reference Radiographs for Inspection of Aluminium and Magnesium die castings, 2002.Search in Google Scholar

[14] VDG Specification P201 – Porosity of Metal Castings, 2002.Search in Google Scholar

[15] Company documentation CATIA, 2012.Search in Google Scholar

[16] Fundamentos de la fundicion a presion, CIE C. Vilanova, Spain, 2008.Search in Google Scholar

[17] Revision Tecnica del Producto, CIE C. Vilanova, Spain, 2008.Search in Google Scholar

[18] Company documentation Bühler, 2010.Search in Google Scholar

[19] Company documentation Idra, 2011.Search in Google Scholar

[20] Company documentation Italpresse, 2011.Search in Google Scholar

[21] Procedimiento IDT 05/1: Cuaderno de cargas de moldes, rev05, CIE Inyectametal, Spain, 2007.Search in Google Scholar

[22] Norma Ingenieria NCV21006C–Tiempo llenado del molde, CIE C. Vilanova, Spain, 2006.Search in Google Scholar

[23] Norma Ingenieria NCV21007B–Velocidad en el ataque, CIE C. Vilanova, Spain, 2006.Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo