Evaluation of Flow Resistance Increase Due to Fouling in Cooling Channels: A Case Study for Rapid Injection Molding

1 Muszyński P, Mrozek K, Poszwa P. Selected methods of injection molds cooling. Mechanik. 2016 Sep;(8-9):996–1000. https://doi:10.17814/mechanik.2016.8-9.332 Search in Google Scholar

2 White JL. Principles of Polymer Engineering Rheology. John Wiley & Sons. January 1991. ISBN 978-0471853626. Search in Google Scholar

3 Poszwa P, Szostak M. Influence of scale deposition on maintenance of injection molds. Eksploatacja i Niezawodnosc - Maintenance and Reliability. 2018; 20(1):39–45. http://dx.doi.org/10.17531/ein.2018.1.6 Search in Google Scholar

4 Søgaard E. Injection Molded Self-Cleaning Surfaces. DTU Nanotech. Denmark, 2014. PhD Thesis. Search in Google Scholar

5 Lalot S. On-Line Detection of Fouling in a Water Circulating Temperature Controller (WCTC) Used in Injection Moulding: Part 1: Principles. Applied Thermal Engineering. 2006; 26(11-12): 1087-1094. https://doi.org/10.1016/j.applthermaleng.2005.11.010 Search in Google Scholar

6 Lalot S. On-Line Detection of Fouling in a Water Circulating Temperature Controller (WCTC) Used in Injection Moulding. Part 2: Application. Applied Thermal Engineering. 2006; 26(11-12): 1095-1105. https://doi.org/10.1016/j.applthermaleng.2005.11.024 Search in Google Scholar

7 Zettler HU, Weiss M, Zhao Q, Müller-Steinhagen H. Influence of Surface Properties and Characteristics on Fouling in Plate Heat Exchangers. Heat Transfer Engineering. 2005;26(2):3-17. https://doi.org/10.1080/01457630590897024 Search in Google Scholar

8 Li J, Liu W, Xia X, Zhou H, Jing L, Peng X, Jiang S. Reducing the Burn Marks on Injection-Molded Parts by External Gas-Assisted Injection Molding. Polymers. 2021; 13: 4087. https://doi.org/10.3390/polym13234087 Search in Google Scholar

9 Vojnová E. The Benefits of a Conformal Cooling Systems the Molds in Injection Molding Process. Procedia Engineering. 2016; 149: 535-543. https://doi.org/10.1016/j.proeng.2016.06.702 Search in Google Scholar

10 Guilong W, Guoqun Z, Huiping L, Yanjin G. Analysis of Thermal Cycling Efficiency Optimal Design of Heating/Cooling Systems for Rapid Heat Cycle Injection Molding Process. Mater Design. 2010; 31: 3426-3441. https://doi.org/10.1016/j.matdes.2010.01.042 Search in Google Scholar

11 Dimla D., Camilotto M., Miani F. Design and Optimisation of Conformal Cooling Channels in Injection Moulding Tools. Journal of Materials Processing Technology. 2005;164-165:1294-300. https://doi.org/10.1016/j.jmatprotec.2005.02.162 Search in Google Scholar

12 Chen SC, Lin YW, Chien RD, Li HM. Variable Mold Temperature to Improve Surface Quality of Microcellular Injection Molded Parts Using Induction Heating Technology. Advances in Polymer Technology. 2008; 27(4):224-232. https://doi.org/10.1002/adv.20133 Search in Google Scholar

13 Kuo CC, Jiang ZF, Lee JH. Effects of Cooling Time of Molded Parts on Rapid Injection Molds with Different Layouts and Surface Roughness of Conformal Cooling Channels. The International Journal of Advanced Manufacturing Technology. 2019;103(5-8):2169–82. https://doi.org/10.1007/s00170-019-03694-2 Search in Google Scholar

14 Kurt M, Kaynak Y, Kamber OS, Mutlu B, Bakir B, Koklu U. Influence of Molding Conditions on The Shrinkage and Roundness of Injection Molded Parts. The International Journal of Advanced Manufacturing Technology. 2009; 46(5-8):571-8. https://doi.org/10.1007/s00170-009-2149-x Search in Google Scholar

15 Jafairan AR, Shakeri M. Investigating the Influence of Different Process Parameters on Shrinkage of Injection-Molding Parts. American Journal of Applied Sciences. 2005;2(3):688-700. https://doi.org/10.3844/ajassp.2005.688.700 Search in Google Scholar

16 Choi DS, Im YT. Prediction of Shrinkage and Warpage in Consideration of Residual Stress in Integrated Simulation of Injection Molding. Composite Structures. 1999;47(1-4):655–65. https://doi.org/10.1016/S0263-8223(00)00045-3 Search in Google Scholar

17 Kovacs JG, Szabo F, Kovacs NK, Suplicz A, Zink B, Tabi T, Hargitai H. Thermal Simulations Measurements for Rapid Tool Inserts in Injection Molding Applications. Applied Thermal Engineering. 2015; 85:44-51. http://dx.doi.org/10.1016/j.applthermaleng.2015.03.075 Search in Google Scholar

18 Shayfull Z, Sharif S, Zain AM, Ghazali MF, Saad RM. Potential of Conformal Cooling Channels in Rapid Heat Cycle Molding: A review. Advances in Polymer Technology. 2014; 33(1):21381. https://doi.org/10.1002/adv.21381 Search in Google Scholar

19 Xu XR, Sachs E, Allen S. The Design of Conformal Cooling Channels in Injection Molding Tooling. Polymer Engineering & Science. 2001;41(7):1265–79. https://doi.org/10.1002/pen.10827 Search in Google Scholar

20 Park HS, Pham NH. Design of Conformal Cooling Channels for an Automotive Part. Int J Automotive Technology. 2009;10(1):87-93. https://doi.org/10.1007/s12239-008-0011-7 Search in Google Scholar

21 Li CG, Li CL. Plastic Injection Mould Cooling System Design by Configuration Space Method. Computer-Aided Design. 2008; 40(3):334–49. https://doi.org/10.1016/j.cad.2007.11.010 Search in Google Scholar

22 Torres-Alba A, Mercado-Colmenero JM, Diaz-Perete D, Martin-Doñate C. A New Conformal Cooling Design Procedure for Injection Moulding Based on Temperature Clusters and Multidimensional Discrete Models. Polymers. 2020; 12(1): 154. https://doi.org/10.3390/polym12010154 Search in Google Scholar

23 Silva HM, Noversa JT, Fernandes L, Rodrigues HL, Pontes AJ. Design, Simulation and Optimization of Conformal Cooling Channels in Injection Molds: A review. The International Journal of Advanced Manufacturing Technology. 2022; 120(7-8):4291–305. https://doi.org/10.1007/s00170-022-08693-4 Search in Google Scholar

24 Kanbur BB, Suping S, Duan F. Design and optimization of conformal cooling channels for injection molding: a review. Int J Adv Manuf Technol. 2020; 106: 3253-3271. https://doi.org/10.1007/s00170-019-04697-9 Search in Google Scholar

25 Feng S, Kamat AM, Pei Y. Design Fabrication of Conformal Cooling Channels in Molds: Review Progress Updates. International Journal of Heat and Mass Transfer. 2021; 171:121082. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121082 Search in Google Scholar

26 Yao DG, Chen SC, Kim B. Rapid Thermal Cycling of Injection Molds: An Overview on Technical Approaches and Applications. Advances in Polymer Technology. 2008; 27(4):233–55. https://doi.org/10.1002/adv.20136 Search in Google Scholar

27 Muvunzi R, Dimitrov DM, Matope S, Hams T. A case study on the design of a hot stamping tool with conformal cooling channels. Int J Adv Manuf Technol. 2021; 114: 1833-1846. https://doi.org/10.1007/s00170-021-06973-z Search in Google Scholar

28 Kanbur BB, Zhou Y, Shen S, Wong KH, Chen C, Shocket A, Duan F. Metal Additive Manufacturing of Plastic Injection Molds with Conformal Cooling Channels. Polymers. 2022; 14: 424. https://doi.org/10.3390/polym14030424 Search in Google Scholar

29 Kuo CC, Xu JY, Zhu YJ, Lee CH. Effects of Different Mold Materials and Coolant Media on the Cooling Performance of Epoxy-Based Injection Molds. Polymers. 2022; 14: 280. https://doi.org/10.3390/polym14020280 Search in Google Scholar

30 Kuo CC, You ZY, Wu JY, Huang JL. Development and application of a conformal cooling channel with easy removal and smooth surfaces. Int J Adv Manuf Technol . 2019;102: 2029-2039. https://doi.org/10.1007/s00170-019-03316-x Search in Google Scholar

31 Kuo C.C., Chen W.H. Improving Cooling Performance of Injection Molding Tool with Conformal Cooling Channel by Adding Hybrid Fillers. Polymers, 2021, 13, 1224. https://doi.org/10.3390/polym13081224 Search in Google Scholar

32 Wei Z, Wu J, Shi N, Li L. Review of Conformal Cooling System Design Additive Manufacturing for Injection Molds. Mathematical Biosciences and Engineering. 2020; 17(5): 5414-5431. https://doi.org/10.3934/mbe.2020292 Search in Google Scholar

33 Park HS, Dang XP, Nguyen DS, Kumar S. Design of Advanced Injection Mold to Increase Cooling Efficiency. International Journal of Precision Engineering and Manufacturing-Green Technology. 2020; 7(2):319–28. https://doi.org/10.1007/s40684-019-00041-4 Search in Google Scholar

34 Papadakis L, Avraam S, Photiou D, Masurtschak S, Falcón JCP. Use of a Holistic Design and Manufacturing Approach to Implement Optimized Additively Manufactured Mould Inserts for the Production of Injection-Moulded Thermoplastics. Journal of manufacturing and materials processing. 2020; 4(4): 100–0. https://doi.org/10.3390/jmmp4040100 Search in Google Scholar

35 Jahan SA, El-Mounayri H. A Thermomechanical Analysis of Conformal Cooling Channels in 3D Printed Plastic Injection Molds. Applied Sciences. 2018; 8(12):2567. https://doi.org/10.3390/app8122567 Search in Google Scholar

36 Jahan SA, Wu T, Zhang Y, Zhang J, Tovar A, Elmounayri H. Thermo-mechanical Design Optimization of Conformal Cooling Channels using Design of Experiments Approach. Procedia Manufacturing. 2017; 10:898–911. https://doi.org/10.1016/j.promfg.2017.07.078 Search in Google Scholar

37 Idelchik IE. Handbook of Hydraulic Resistance. Jerusalem: Israel Program for Scientific Translations Ltd. 1968. Search in Google Scholar