<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper presents the synthesis of a pneumatic control system for a selected configuration of the transport path for the delivery of rolling elements to spiral storage in inter-operational transport. The sequential control system sets the state of the manifolds to ensure a flow of workpieces to serve the subsequent storage. The essential module of the control system is the memory block. It is developed based on a storage filling sequence graph. The filling level of the storages can be monitored in one or two points using sensors. The rolling element displacement control sensors work together with appropriately designed systems to execute the delay of the rising and falling edge input signal. By using a two-level control of the filling level of the storages, it is possible to control the emptying status of the storages as a function of the technological time of removal of the items from the storage between the two control points. Control systems were synthesised and verified using Festo’s FluidSim computer programme.</p>
</abstract>

This paper presents the synthesis of a pneumatic control system for a selected configuration of the transport path for the delivery of rolling elements to spiral storage in inter-operational transport. The sequential control system sets the state of the manifolds to ensure a flow of workpieces to serve the subsequent storage. The essential module of the control system is the memory block. It is developed based on a storage filling sequence graph. The filling level of the storages can be monitored in one or two points using sensors. The rolling element displacement control sensors work together with appropriately designed systems to execute the delay of the rising and falling edge input signal. By using a two-level control of the filling level of the storages, it is possible to control the emptying status of the storages as a function of the technological time of removal of the items from the storage between the two control points. Control systems were synthesised and verified using Festo’s FluidSim computer programme.

Synthesis of Pneumatic Systems in the Control of the Transport Line of Rolling Elements

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

This paper presents the synthesis of a pneumatic control system for a selected configuration of the transport path for the delivery of rolling elements to...

Synthesis of Pneumatic Systems in the Control of the Transport Line of Rolling Elements

Published Online: Apr 25, 2023

Page range: 254 - 262

Received: Dec 06, 2022

Accepted: Jan 23, 2023

DOI: https://doi.org/10.2478/ama-2023-0029

Keywords
pneumatic systems, delay execution systems, synthesis, verification of sequential systems

© 2023 Adam Szcześniak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Synthesis of Pneumatic Systems in the Control of the Transport Line of Rolling Elements

Published Online: Apr 25, 2023

Page range: 254 - 262

Received: Dec 06, 2022

Accepted: Jan 23, 2023

DOI: https://doi.org/10.2478/ama-2023-0029

Keywordspneumatic systems, delay execution systems, synthesis, verification of sequential systems

© 2023 Adam Szcześniak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Keywords
pneumatic systems, delay execution systems, synthesis, verification of sequential systems