[
1. Tao YB, He Y-L. A review of phase change material and performance enhancement method for latent heat storage system. Renew. Sustain. Energy Rev. 2018; 93: 245–259.
]Search in Google Scholar
[
2. Farid MM, Khudhair AM, Siddique AK Razack, Al-Hallaj S. A review on phase change energy storage: materials and applications. Energy Conversion and Management. 2004; 45:1597–1615.10.1016/j.enconman.2003.09.015
]Search in Google Scholar
[
3. Sharma A, Tyagi VV, Chen CR, Buddhi D. Review on thermal energy storage with phase change materials and applications. Renewable and Sustainable Energy Reviews. 2009; 13: 318–345.10.1016/j.rser.2007.10.005
]Search in Google Scholar
[
4. Agyenim F, Hewitt N, Eames P, Smyth M. A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS). Renewable and Sustainable Energy Reviews. 2010; 14: 615–628.10.1016/j.rser.2009.10.015
]Search in Google Scholar
[
5. Kalnæs SE, Jelle BP. Phase change materials and products for building applications: A state-of-the-art review and future research opportunities. Energy and Buildings. 2015; 94: 150–176.10.1016/j.enbuild.2015.02.023
]Search in Google Scholar
[
6. Chandel SS, Agarwal T. Review of current state of research on energy storage, toxicity, health, hazards and commercialization of phase changing materials. Renewable and Sustainable Energy Reviews. 2017; 67:581–596.10.1016/j.rser.2016.09.070
]Search in Google Scholar
[
7. Ren Q, Guo P, Zhu J. Thermal management of electronic devices using pin-fin based cascade microencapsulated PCM/expanded graphite composite. Int J Heat Mass Transf. 2020; 149:119199.10.1016/j.ijheatmasstransfer.2019.119199
]Search in Google Scholar
[
8. Pielichowska K, Pielichowski K. Phase change materials for thermal energy storage. Progress in Materials Science. 2014; 65: 67–123.10.1016/j.pmatsci.2014.03.005
]Search in Google Scholar
[
9. Douvi E, Pagkalos C, Dogkas G, Koukou MK, Stathopoulos VN, Caouris Y, Vrachopoulos MG. Phase change materials in solar domestic hot water systems: A review. International Journal of Thermofluids. 2021; 10:100075.10.1016/j.ijft.2021.100075
]Search in Google Scholar
[
10. Souayfane F, Fardoun F, Biwole P-H. Phase change materials (PCM) for cooling applications in buildings: A review. Energy and Buildings. 2016; 129: 396-431.10.1016/j.enbuild.2016.04.006
]Search in Google Scholar
[
11. Nair AM, Wilson C, Huang MJ, Griffiths P, Hewitt N. Phase change materials in building integrated space heating and domestic hot water applications: A review. Journal of Energy Storage. 2022; 54:105227.10.1016/j.est.2022.105227
]Search in Google Scholar
[
12. Schaetzle WJ. Thermal energy storage in aquifers: design and applications. 1980; New York: Pergamon.
]Search in Google Scholar
[
13. Schmidt FW. Thermal energy storage and regeneration. 1981; New York: McGraw-Hill.10.1115/1.3266227
]Search in Google Scholar
[
14. Naplocha K., et al. Effects of cellular metals on the performances and durability of composite heat storage systems. Int. J. Heat Mass Transf. 2017; 117:1214-1219.
]Search in Google Scholar
[
15. Libeer W, et al. Two-phase heat and mass transfer of phase change materials in thermal management systems. Int. J. Heat Mass Transf. 2016; 10: 215-223.10.1016/j.ijheatmasstransfer.2016.04.076
]Search in Google Scholar
[
16. Pagkalos C, et al. Evaluation of water and paraffin PCM as storage media for use in thermal energy storage applications: a numerical approach. 2020; Int. J. Thermofluids 1–2.10.1016/j.ijft.2019.100006
]Search in Google Scholar
[
17. Telkes M, Raymond E. Storing solar heat in chemicals—a report on the Dover house. Heat Vent. 1949; 46(11):80–86.
]Search in Google Scholar
[
18. Quenel J, Atakan B. Heat flux in latent thermal energy storage systems: the influence of fins, thermal conductivity and driving temperature difference. Heat Mass Transfer. 2022. https://doi.org/10.1007/s00231-022-03220-310.1007/s00231-022-03220-3
]Search in Google Scholar
[
19. Yang X, Yu J, Xiao T, Hu Z, He Y-L. Design and operating evaluation of a finned shell-and-tube thermal energy storage unit filled with metal foam. Appl. Energy. 2020; 261:114385.
]Search in Google Scholar
[
20. Acir A, Canli ME. Investigation of Fin Application Effects on Melting Time in a Latent Thermal Energy Storage System with Phase Change Material (PCM). Applied Thermal Engineering. 2018.10.1016/j.applthermaleng.2018.09.013
]Search in Google Scholar
[
21. Aramesh M, Shabani B. Metal foams application to enhance the thermal performance of phase change materials: A review of experimental studies to understand the mechanisms. Journal of Energy Storage. 2022; 50:104650.10.1016/j.est.2022.104650
]Search in Google Scholar
[
22. Tao YB, He YL. A review of phase change material and performance enhancement method for latent heat storage system. Renewable and Sustainable Energy Reviews. 2018; 93: 245–259.10.1016/j.rser.2018.05.028
]Search in Google Scholar
[
23. Tariq SL, Ali HM, Akram MA, Janjua MM, Ahmadlouydarab M. Nano-particles enhanced phase change materials (NePCMs)-A recent review. Applied Thermal Engineering. Applied Thermal Engineering. 2020; 176:115305.10.1016/j.applthermaleng.2020.115305
]Search in Google Scholar
[
24. Jianfeng WU, Yang ZHOU, Mengke SUN, Xiaohong XU, Kezhong TIAN, Jiaqi YU. Mechanical Properties and Microstructure of Al2O3/SiC Composite Ceramics for Solar Heat Absorber. Journal of Wuhan University of Technology-Mater. Sci. Ed.:615-623.
]Search in Google Scholar
[
25. Devaiah M, Comparison of Thermal Conductivity Experimental Results of SICP/AL2O3 Ceramic Matrix Composites with Mathematical Modeling. International Journal of Applied Engineering Research. 2018; 13(6): 3784-3788.
]Search in Google Scholar
[
26. DIN 51007 General principles of differential thermal analysis.
]Search in Google Scholar
[
27. ISO 11357-4 Plastics. Differential scanning calorimetry (DSC). Part 4: Determination of specific heat capacity.
]Search in Google Scholar
[
28. Ditmars DA, et al. Jour. Res. National Bureau of Standards. 1982; 87(2):159-163.
]Search in Google Scholar
[
29. Agyenim F, Hewitt N, Eames P, Smyth M. A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS). Renewable and Sustainable Energy Reviews. 2010; 14: 615–628.10.1016/j.rser.2009.10.015
]Search in Google Scholar
[
30. Paris J, Falardeau M, Villeneuve C. Thermal storage by latent heat: a viable option for energy conservation in buildings. Energy Sources. 1993; 15: 85–93.10.1080/00908319308909014
]Search in Google Scholar
[
31. ISO 11357-3 Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization.
]Search in Google Scholar
[
32. Eysel W; Breuer KH. The calorimetric calibration of differential scanning calorimetry cells. Thermochim. Acta. 1982; 57(3): 317-329.
]Search in Google Scholar
[
33. Coleman HW, Steele WG. Experimentation, Validation, and Uncertainty Analysis for Engineers, third ed. John Wiley & Sons, Inc, 2009.10.1002/9780470485682
]Search in Google Scholar
[
34. Evaluation of measurement data — Guide to the expression of uncertainty in measurement, GUM; 2008.
]Search in Google Scholar
[
35. KD2 Pro Thermal Properties Analyzer Operator’s Manual. Version 10. Decagon Devices. Inc.; 2011.
]Search in Google Scholar
[
36. Wang J, Xie H, Xin Z., Thermal properties of paraffin based composites containingmulti-walled carbon nanotubes, Thermochimica Acta. 2009; 488:39-42.
]Search in Google Scholar
[
37. Gulfam R, Zhang P, Meng Z. Advanced thermal systems driven by paraon-based phase change materials - A review. Applied Energy. 2019; 238: 582-611.10.1016/j.apenergy.2019.01.114
]Search in Google Scholar
[
38. Gulfam R, Zhang P, Meng Z., Phase-Change Slippery Liquid-Infused Porous Surfaces with Thermo-Responsive Wetting and Shedding States. ACS Appl. Mater. Interfaces. 2020; 12: 34306−3431610.1021/acsami.0c0644132597163
]Search in Google Scholar
[
39. Saydam V, Duan X. Dispersing Different Nanoparticles in Paraffin Wax as Enhanced Phase Change Materials – A Study on the Stability Issue. Journal of Thermal Analysis and Calorimetry volume. 2019; 135: 1135-1144.10.1007/s10973-018-7484-4
]Search in Google Scholar
[
40. Lachheb M, Karkri M, Albouchi F, Ben Nasrallah S, Fois M, Sobolciak P.Thermal properties measurement and heat storage analysis of paraffin/graphite composite phase change material. Composites: Part B 66. 2014: 518–525.10.1016/j.compositesb.2014.05.011
]Search in Google Scholar
[
41. de Vries DA. A nonstationary method for determining thermal conductivity of soil in situ. Soil Sci. 1952; 73:83-9.10.1097/00010694-195202000-00001
]Search in Google Scholar
[
42. D. Martin III Bradley, J. Putman, Nigel B.Kaye: Using image analysis to measure the porosity distribution of a porous pavement, Construction and Building Materials, Volume 48, November 2013, pp. 210-21710.1016/j.conbuildmat.2013.06.093
]Search in Google Scholar
[
43. Image Processing and Analysis in Java-ImageJ. Available from: https://imagej.nih.gov/ij/index.html
]Search in Google Scholar
[
44. EN 623-2 Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of density and porosity.
]Search in Google Scholar
[
45. IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam. In: International Steam Tables. Springer. Berlin, Heidelberg. 2018.
]Search in Google Scholar
[
46. Sun X, Chu Y, Medina MA, Mo Y, Fan S, Liao S. Experimental investigations on the thermal behavior of phase change material (PCM) in ventilated slabs. Applied Thermal Engineering. 2014; Volume 148; 5:1359-1369.10.1016/j.applthermaleng.2018.12.032
]Search in Google Scholar
[
47. Bałon P., Kiełbasa B., Kowalski Ł., Smusz R., Case Study on the In_ uence of Forming Parameters on Complex Shape Part Deformation, Advances in Science and Technology Research Journal 2022, 16(6):204–21310.12913/22998624/156464
]Search in Google Scholar
[
48. Wilk J., Bałon P., Smusz R., Rejman E., Świątoniowski A., Kiełbasa B., Szostak J., Cieślik J., Kowalski Ł., Thermal Stratification in the Storage Tank, Procedia Manufacturing, 2020; 47:998–1003
]Search in Google Scholar