K. Suzuki, “Artificial neural networks- industrial and control engineering applications”, INTECH open access publisher, 2011.10.5772/2041Search in Google Scholar
H. Kang, Q.Yang, C.Butler, and Fi Benati, “Optimization of sensor locations for measurement of flue gas flow in industrial ducts and stacks using neural networks”, IEEE Trans. on Instrum. and Meas., vol. 49, no.2, pp. 288-233, April 2000.10.1109/19.843054Search in Google Scholar
T.T. Yeh, P.I. Espina and A.Stephen Osella, “An intelligent ultrasonic flow meter for improved flow measurement and flow calibration facility”, IEEE Instrum. and Meas. Conf., pp. 1741-1746, May 2001.Search in Google Scholar
C. Renotte, A. Vande Wouwer, Ph. Bogaertst and M. Remy, “Neural network applications in non-linear modelling of (bio)chemical processes”, Measurement + Control, vol. 34, pp.197-201, Sept. 2001.10.1177/002029400103400702Search in Google Scholar
S.G. Etemad, J. Thibault, and S.H. Hashemabadi, “Calculation of the Pitot tube correction factor for Newtonian and Non-Newtonian fluids,” ISA Trans., vol. 42, no.4, pp. 505-512, Oct. 2003.10.1016/S0019-0578(07)60001-9Search in Google Scholar
R. A. Hooshmand and M. Joorabian, “Design and optimization of electromagnetic flowmeter for conductive liquids and its calibration based on neural networks,”IEE Proc.on Science, Measurement and Technology, vol. 153, no. 4, pp.139-146, July 2006.10.1049/ip-smt:20050042Search in Google Scholar
Lei Shi, Li Cai, Zize Liang,and Zengguang Hou, “Nonlinear Calibration of pH Sensor Based on the Back–Propagation Neural Network,” IEEE Conference on Networking, Sensing and Control, pp. 1300-1304, 2008.Search in Google Scholar
T. Povey and P. F. Beard, “A novel experimental technique for accurate mass flow rate measurement”, Elsevier, Flow Meas. and Instrum. vol. 19, no. 5, pp. 251-259, Oct. 2008.10.1016/j.flowmeasinst.2007.11.005Search in Google Scholar
V.N. Petoussis, P. D. Dimitropoulos, and G. Stamoulis, “A novel Hall effect sensor using elaborate offset cancellation method,” Sensors and Transducers J., vol. 100, no. 1, pp. 85-91, Jan. 2009.Search in Google Scholar
Bo-Kai Xia and Ying-chun Bo, “A soft sensor for water content-in-oil based on GA-RBF neural network” Measurement + Control, vol. 43/6, pp. 179-182, July 2010.10.1177/002029401004300604Search in Google Scholar
V.N. Petoussis, P. D. Dimitropoulos, and G. Stamoulis, “General development of a new Hall effect sensor,” Sensors Transducers J., vol. 127, no. 4, pp. 36-44, Apr. 2011.Search in Google Scholar
A. A. Aldair and W.J. Wang, “Design an intelligent controller for full vehicle nonlinearActive suspension systems”, International journal on smart sensing and intelligentsystems, vol. 4, no. 2, pp. 224- 243, June 2011.10.21307/ijssis-2017-437Search in Google Scholar
R.I. Rodriguez and Yi Jia, “A wireless inductive–capacitive (L-C) Sensor for rotating component temperature monitoring”, International journal on smart sensing and intelligent systems, vol. 2, no. 2, pp. 325-337, June 2011.10.21307/ijssis-2017-442Search in Google Scholar
Nasrin Afsarimanesh and Pathan Zaher Ahmed, “LabVIEW based characterization and optimization of thermal sensors”, International journal on smart sensing and intelligent systems, vol. 4, no. 4, pp.726-739, Dec. 2011.10.21307/ijssis-2017-466Search in Google Scholar
K. Chakraborty, N. Mandal, and R. Sarkar, “Design of an electronic flow transmitter using LVDT & hall sensor,” Int. J. Electron. Commun. Technol., vol. 4, no. 1, pp. 180182, 2013.Search in Google Scholar
Jianmingliu, “Neural networks method applied to the property study of steelconcreteComposite columns under axial compression”, International journal on smart sensing andIntelligent systems, vol. 6, no. 2, pp. - 548-566, April 2013.10.21307/ijssis-2017-554Search in Google Scholar
Huichao Zhao, Lihui Peng, Tsuyoshi Takahashi, Takuya Hayashi, Kazuyoshi Shimizu, and Toshihiro Yamamoto, “ANN based Data Integration for Multi-path Ultrasonic Flowmeter,” IEEE Sensors journal,vol.14, no.2, pp. 362-370, Feb. 2014.10.1109/JSEN.2013.2282466Search in Google Scholar
Harvey T Dearden, “Uncertainty in Flow Totals,” Measurement and Control, vol. 47. no. 5, pp. 158-160, June 2014.10.1177/0020294014534207Search in Google Scholar
Zhang Haining and Ren Yonghui, “Frequency processing and Temperature– pressurecompensation of the vortex flow meter based on two phase”, International journal onsmart sensing and intelligent systems, vol. 7, no. 3, pp. 1326-1346, Sept. 2014.Search in Google Scholar
N. Mandal, B. Kumar, R. Sarkar, and S.C. Bera, “Design of an flow transmitter using an improved inductance bridge network and rotameter as sensor,” IEEE Trans. on Instrum. Meas., vol. 63, no. 12, pp. 3127-3136, Dec. 2014.Search in Google Scholar
Xing Haihua, Yu Xianchuan, Hu Dan and Dai Sha, “Sensitivity analysis of hierarchicalhybrid fuzzy- neural network”, International journal on smart sensing and intelligentsystems, vol. 8, no. 3, pp. 1837-1854, Sept. 2015.Search in Google Scholar
S. Sinha, D. Banerjee, N. Mandal, R. Sarkar, and S.C. Bera, “Design and implementation of real-time flow measurement system using hall probe sensor and PC based SCADA,” IEEE Sensors Journal, vol. 15, no. 10, pp. 5592-5600, Oct. 201510.1109/JSEN.2015.2442651Search in Google Scholar
Shaojiang Dong, XiangyangXu, Juan Liu and Zhengyuan Gao, “Rotating Machine Fault Diagnosis Based on Locality Preserving Projection and Back Propagation Neural Network–Support Vector Machine Model” Measurement and Control, vol. 48(7), pp. 211–216, 2015.10.1177/0020294015595995Search in Google Scholar