Reliability Analysis Of Rigid Pile Caps Using An Iterative Strut-And-Tie Model

[1]Schlaich J., Schäfer K., Jennewein M. (1987). Toward a consistent design of structural concrete. PCI Journal 32(3), 74–150.10.15554/pcij.05011987.74.150 Search in Google Scholar

[2]ACI; (2014). Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14). American Concrete Institute, Farmington Hills, MI, USA. Search in Google Scholar

[3]JSCE; (2010). Standard Specifications for Concrete Structures – 2007, Design. JSCE Guidelines for Concrete No.15, Japan Society of Civil Engineers. Tokyo, Japan. Search in Google Scholar

[4]EHE; (2011). Instruction for Structural Concrete. EHE-08, Comisión Permanente Del Hormigón, Madrid, Spain (in Spanish). Search in Google Scholar

[5]EN 1992-1-1; (2014). Eurocode 2: Design of Concrete Structures – Part 1-1: General Rules and Rules for Buildings. EN 1992-1-1:2004+A1:2014, European Committee For Standardization, Brussels, Belgium. Search in Google Scholar

[6]FIB; fib Model Code 2010. International Federation For Structural Concrete, Lausanne, Switzerland. Search in Google Scholar

[7]Adebar P., Zhou Z. (1996). Design of deep pile caps by strut-and-tie models. ACI Structural Journal, 93(4), 1–12.10.14359/9703 Search in Google Scholar

[8]Brown M.D., Sankovich C.L., Bayrak O., Jirsa J.O., Breen J.E., Wood S.L. (2006). Design for Shear in Reinforced Concrete Using Strut-and-Tie Models. Report No. FHWA/TX-06/0-4371-2. Center for Transportation Research, The University of Texas at Austin, USA. Search in Google Scholar

[9]Chantelot G., Mathern, A. (2010). Strut-and-tie modelling of reinforced concrete pile caps. Master of Science Thesis, Chalmers University of Technology, Sweden. Search in Google Scholar

[10]ACI. (2010). Further Examples for the Design of Structural Concrete with Strut-and-Tie Models. ACI SP-273, American Concrete Institute, Farmington Hills, MI, USA. Search in Google Scholar

[11]Araújo J.M. (2016). Design of rigid pile caps through an iterative strut-and-tie model. Journal of Advanced Concrete Technology 14(8), 397–407.10.3151/jact.14.397 Search in Google Scholar

[12]CSA. (2014). A23.3-14: Design of Concrete Structures. Canadian Standards Association, Mississauga, Ontario, Canada. Search in Google Scholar

[13]CEB-FIP. (1993). CEB-FIP Model Code 1990. Comité Euro-International Du Béton, edited by Thomas Telford, London, UK. Search in Google Scholar

[14]Fusco P.B. (1995). Technique of Arming Concrete Structures. Pini, São Paulo, Brazil (in Portuguese). Search in Google Scholar

[15]Jimenez Montoya P., Garcia Mesegner A., Moran Cabre F. (2000). Reinforced Concrete. 14nd ed. Gustavo Gili, Barcelona (in Spanish). Search in Google Scholar

[16]Calavera J. (2000). Calculation of Foundation Structures. 4nd ed. INTEMAC, Madrid (in Spanish). Search in Google Scholar

[17]Adebar P., Kuchma D., Collins M. P. (1990). Strut- and-tie models for the design of pile caps: an experimental sudy. ACI Structural Journal. 87(1), 81–92. Search in Google Scholar

[18]Araújo J.M. (2001). Probabilistic analysis of reinforced concrete columns. Advances in Engineering Software 32(12), 871–879.10.1016/S0965-9978(01)00042-4 Search in Google Scholar

[19]Ang A.H.S., Tang W.H. (1984). Probability Concepts in Engineering Planning and Design – Vol. II: Decision, Risk and Reliability. John Wiley & Sons, New York, NY, USA. Search in Google Scholar

[20]Munhoz F.S. (2014). Experimental and numerical analysis of rigid two-pile caps with columns of square and rectangular sections and different reinforcement rates. Doctoral thesis, Escola de Engenharia de São Carlos, USP, São Carlos, Brazil (in Portuguese). Search in Google Scholar

[21]Mautoni M. (1972). Pile Caps on Two Supports. Grêmio Politécnico, São Paulo, SP, Brazil, (in Portuguese). Search in Google Scholar

[22]Blévot J., Frémy R. (1967). Semelles sur pieux, (The pile caps). Institut Technique du Batiment et des Travaux Publics 20(230), 223–295. Search in Google Scholar

[23]Miguel M.G. (2000). Experimental and numerical analysis of three-pile caps. Doctoral thesis, Escola de Engenharia de São Carlos, USP, São Carlos, Brazil. (in Portuguese). Search in Google Scholar

[24]Clarke J.L. (1973). Behavior and Design of Pile Caps with Four Piles, Technical Report No. 42.489, Cement and Concrete Association, London, UK. Search in Google Scholar

[25]Suzuki K., Otsuki K., Tsubata T. (1998). Influence of bar arrangement on ultimate strength of four-pile caps. Transactions of the Japan Concrete Institute, 20, Tokyo, Japan. Search in Google Scholar

[26]Suzuki K., Otsuki K., Tsubata T. (1999). Experimental study on four-pile caps with taper. Transactions of the Japan Concrete Institute (21), Tokyo, Japan. Search in Google Scholar

[27]Suzuki K., Otsuki K., Tsuhiya T. (2000). Influence of edge distance on failure mechanism of pile caps. Transactions of the Japan Concrete Institute, 22, Tokyo, Japan. Search in Google Scholar

[28]Suzuki K,, Otsuki K. (2002). Experimental study on corner shear failure of pile caps. Transactions of the Japan Concrete Institute (23), Tokyo, Japan. Search in Google Scholar

[29]Souza R., Kuchma D., Park J., Bittencourt T. (2009). Adaptable strut-and-tie model for design and verification of four-pile caps. ACI Structural Journal, 106(2), 142–150. Search in Google Scholar

[30]EN 1990; (2009). Eurocode – Basis of Structural Design. European Committee For Standardization, Brussels, Belgium. Search in Google Scholar

[31]Haldar A., Mahadevan S. (2000). Probability, Reliability and Statistical Methods in Engineering Design. John Wiley & Sons, New York, NY, USA. Search in Google Scholar