[1. Malaysian Timber Industry Board. (2012). Retrieved 1-12-2013 from http://www.mtib.gov.my]Search in Google Scholar
[2. Ong, H.R., Prasad, D.M.R., Khan, M.R., Rao, D.S., Jeyaratnam, N. & Raman, D.K. (2012). Effect of Jatropha Seed Oil Meal and Rubber Seed Oil Meal as Melamine Urea Formaldehyde Adhesive Extender on the Bonding Strength of Plywood. J. Appl. Sci. 12(11), 1148-1153. DOI: 10.3923/ jas.2012.1148.1153.10.3923/jas.2012.1148.1153]Search in Google Scholar
[3. Ong, H.R., Prasad, R., Khan, M.M.R. & Chowdhury, M.N.K. (2012). Effect of palm kernel meal as melamine urea formaldehyde adhesive extender for plywood application: Using a Fourier Transform Infrared Spectroscopy (FTIR) study. Appl. Mech. Mater. 121-126, 493-498. DOI: 10.4028/www.scientific. net/AMM.121-126.493.]Search in Google Scholar
[4. Zhang, Y., Zhu, W., Lu, Y., Gao, Z. & Gu, J. (2013). Water-Resistant Soybean Adhesive for Wood Binder Employing Combinations of Caustic Degradation, Nano-Modification, and Chemical Crosslinking. BioResour. 8(1), 1283-1291.10.15376/biores.8.1.1283-1291]Search in Google Scholar
[5. International Agency for Research on Cancer Press. (2004).]Search in Google Scholar
[6. Dongbin, F. & An, M. (2006). Curing Characteristics of Low Molar Ratio Urea-Formaldehyde Resins. J. Adhes. Interface 7(4), 45-52.]Search in Google Scholar
[7. Kim, S., Kim, H.J., Kim, H.S. & Lee, H.H. (2006). Effect of Bio-Scavengers on the Curing Behavior and Bonding Properties of Melamine-Formaldehyde Resins. Macromol. Mater. Eng. 291(9), 1027-1034. DOI: 10.1002/mame.200600213.10.1002/mame.200600213]Search in Google Scholar
[8. Que, Z., Furuno, T., Katoh, S. & Nishino, Y. (2007). Effects of urea-formaldehyde resin mole ratio on the properties of particleboard. Build. Environ. 42(3), 1257-1263. DOI: 10.1016/j. buildenv.2005.11.028.]Search in Google Scholar
[9. Mao, A., Hassan, E.B. & Kim, M.G. (2013). Investigation of Low Mole Ratio UF and UMF Resins Aimed at Lowering the Formaldehyde Emission Potential of Wood Composite Boards. BioResour. 8(2), 2453-2469.10.15376/biores.8.2.2453-2469]Search in Google Scholar
[10. Pizzi, A. (1994). Advanced wood adhesives technology. CRC Press.10.1201/9781482293548]Search in Google Scholar
[11. Hojilla-Evangelista, M.P. (2010). Adhesion properties of plywood glue containing soybean meal as an extender. J. Am. Chem. Soc. 87(9), 1047-1052. DOI: 10.1007/s11746-010-1586-x.10.1007/s11746-010-1586-x]Search in Google Scholar
[12. Hojilla-Evangelista, M.P. & Bean, S.R. (2011). Evaluation of sorghum flour as extender in plywood adhesives for sprayline coaters or foam extrusion. Ind. Crops Prod. 34(1), 1168-1172. DOI: 10.1016/j.indcrop.2011.04.005.10.1016/j.indcrop.2011.04.005]Search in Google Scholar
[13. Zhang, J.L., Chen, H.X., Ke, C.M., Zhou, Y., Lu, H.Z. & Wang, D.L. (2012). Graft polymerization of styrene onto waste rubber powder and surface characterization of graft copolymer. Polym. Bull. 68(3), 789-801. DOI: 10.1007/s00289-011-0586-9.10.1007/s00289-011-0586-9]Search in Google Scholar
[14. Wu, W.L. & Zhang, J. (2013). Preparation and Characterization on an Environment Friendly Used Rubber Powder Modified Pulp Sediments Composites. Adv. Mater. Res. 602, 1111-1115. DOI: 10.1007/s13726-012-0083-5.10.1007/s13726-012-0083-5]Search in Google Scholar
[15. Marković, G., Veljković, O., Marinović-Cincović, M., Jovanović, V., Samaržija-Jovanović, S. & Budinski-Simendić, J. (2013). Composites based on waste rubber powder and rubber blends: BR/CSM. Compos. Part B Eng. 45(1), 178-184. DOI: 10.1016/j.compositesb.2012.08.013.10.1016/j.compositesb.2012.08.013]Search in Google Scholar
[16. Al-Tayeb, M.M., Abu Bakar, B., Akil, H.M. & Ismail, H. (2012). Effect of partial replacements of sand and cement by waste rubber on the fracture characteristics of concrete. Polym. Plast. Technol. Eng. 51(6), 583-589. DOI: 10.1080/03602559.2012.659307.10.1080/03602559.2012.659307]Search in Google Scholar
[17. Wu, W. & Zhang, J. (2012). Preparation and characterization of environment friendly used rubber powder modified pulp sediments composites. Iran. Polym. J. 21(11), 763-769. DOI: 10.1007/s13726-012-0083-5.10.1007/s13726-012-0083-5]Search in Google Scholar
[18. Fan, P. & Lu, C. (2011). A Study on Functionalization of Waste Tire Rubber Powder Through Ozonization. J. Polym. Environ. 19(4), 943-949. DOI: 10.1007/s10924-011-0352-y.10.1007/s10924-011-0352-y]Search in Google Scholar
[19. Bono, A., Yeo, K.B. & Siambun, N.J. (2003). Melamine- Urea-Formaldehyde (MUF) Resin: The Effect of the Number of Reaction Stages and Mole Ratio on Resin Properties. J. Teknol. 38(1), 43-54. DOI: 10.11113/jt.v38.508.10.11113/jt.v38.508]Search in Google Scholar
[20. Japanese Agricultural Standard for Plywood. (2003). MAFF, No.233 Ministry of Agriculture and Forestry.]Search in Google Scholar
[21. Nash, T. (1953). The colorimetric estimation of formaldehyde by means of the Hantzsch reaction. Biochem. J. 55(3), 416.10.1042/bj0550416126929213105648]Search in Google Scholar
[22. Kim, S. & Kim, H.J. (2006). Study of miscibility of melamine- formaldehyde resin and poly (vinyl acetate) blends for use as adhesives in engineered flooring. J. Adhes. Sci. Technol. 20(2-3), 209-219. DOI: 10.1163/156856106775897739.10.1163/156856106775897739]Search in Google Scholar
[23. Tamez Uddin, M., Rukanuzzaman, M., Maksudur Rahman Khan, M. & Akhtarul Islam, M. (2009). Adsorption of methylene blue from aqueous solution by jackfruit (Artocarpus heteropyllus) leaf powder: A fixed-bed column study. J. Environ. Manage. 90(11), 3443-3450. DOI: 10.1016/j. jenvman.2009.05.030.]Search in Google Scholar
[24. Minamisawa, M., Minamisawa, H., Yoshida, S. & Takai, N. (2004). Adsorption behavior of heavy metals on biomaterials. J. Agric. Food Chem. 52(18), 5606-5611. DOI: 10.1021/jf0496402.10.1021/jf049640215373400]Search in Google Scholar
[25. Soto, R., Freer, J. & Baeza, J. (2005). Evidence of chemical reactions between di-and poly-glycidyl ether resins and tannins isolated from Pinus radiata D. Don bark. Bioresour. Technol. 96(1), 95-101. DOI: 10.1016/j.biortech.2003.05.006.10.1016/j.biortech.2003.05.00615364086]Search in Google Scholar
[26. Liu, X., Li, Z., Zhang, Q., Li, F. & Kong, T. (2012). Preparation of CuO/C core-shell nanowires and its application in lithium ion batteries. Mater. Lett. 80, 37-39. DOI: 10.1016/j. matlet.2012.04.054.]Search in Google Scholar
[27. Blanton, T.N. & Barnes, C.L. (2005). Quantitative analysis of calcium oxide desiccant conversion to calcium hydroxide using X-ray diffraction. Adv. X-ray Anal. 28, 45-51.]Search in Google Scholar
[28. Alexandre-Franco, M., Fernández-González, C., Alfaro- -Domínguez, M., Palacios Latasa, J.M. & Gómez-Serrano, V. (2010). Devulcanization and Demineralization of Used Tire Rubber by Thermal Chemical Methods: A Study by X-ray Diffraction. Energy Fuels 24(6), 3401-3409. DOI: 10.1021/ef901523t. 10.1021/ef901523t]Search in Google Scholar
[29. Darmawan, S., Sofyan, K., Pari, G. & Sugiyanto, K. (2010). Effect of activated charcoal addition on formaldehyde emission of medium density fiberboard. J. For. Res. 7(2), 100-111.10.20886/ijfr.2010.7.2.100-111]Search in Google Scholar
[30. Kumar, A., Gupta, A., Sharma, K., Nasir, M. & Khan, T.A. (2013). Influence of activated charcoal as filler on the properties of wood composites. Int. J. Adhes. Adhes. 46, 34-39. DOI: 10.1016/j.ijadhadh.2013.05.017.10.1016/j.ijadhadh.2013.05.017]Search in Google Scholar
[31. Mansouri, H.R. & Pizzi, A. (2007). Recycled micronized polyurethane powders as active extenders of UF and PF wood panel adhesives. Holz als Roh und Werkstoff 65(4), 293-299. DOI: 10.1007/s00107-006-0168-y.10.1007/s00107-006-0168-y]Search in Google Scholar
[32. Bono, A., Maizura, N., Salah, S. & Chiw, H.K. (2011). The Performance of Melamine-Urea-Formaldehyde Resin with Palm Kernel as Filler. Adv. Mater. Res. 233-235, 3-10. DOI: 10.4028/www.scientific.net/AMR.233-235.3.10.4028/www.scientific.net/AMR.233-235.3]Search in Google Scholar
[33. Babcock, G.E. & Smith, A.K. (1947). Extending phenolic resin plywood glues with proteinaceous materials. Ind. Eng. Chem. 39(1), 85-88. DOI: 10.1021/ie50445a029.10.1021/ie50445a029]Search in Google Scholar
[34. Qiao, L., Easteal, A.J., Bolt, C.J., Coveny, P.K. & Franich, R.A. (1999). The effects of filler materials on poly (vinyl acetate) emulsion wood adhesives. Pigment Resin Technol. 28(6), 326-330. DOI: 10.1108/03699429910302300.10.1108/03699429910302300]Search in Google Scholar
[35. Singh, A., Dawson, B., Rickard, C., Bond, J. & Singh, A. (2008). Light, confocal and scanning electron microscopy of wood-adhesive interface. Microsc. Anal. 22(3), 5-8.]Search in Google Scholar
[36. De Meijer, M., Thurich, K. & Militz, H. (1998). Comparative study on penetration characteristics of modern wood coatings. Wood Sci. Technol. 32(5), 347-365. DOI: 10.1007/ BF00702791.10.1007/BF00702791]Search in Google Scholar
[37. Kim, S., Kim, H.J., Xu, G.Z. & Eom, Y.G. (2007). Environment-friendly adhesives for fancy veneer bonding of engineered flooring to reduce formaldehyde and TVOC emissions. Mokchae Konghak 35(5), 58-66. ]Search in Google Scholar