<abstract><title style='display:none'>ABSTRACT</title> The GNSS standard positioning solution determines the coordinates of the GNSS receiver and the receiver clock offset from measurements of at least four pseudoranges. For GNSS positioning, a direct solution was derived for five and ten observed satellites without linearisation of the observation equations and application of the least squares method. The article presents the basic principles of methods for solving the positioning problem, the formulas and their derivation. The numerical examples with simulated pseudorange data confirm the correct performance of the proposed algorithm. The presented algorithms should be further tested with real measurements in other domains of positioning and navigation as well.</abstract>

GNSS positioning algorithms using methods of reference point indicators

<abstract xml:lang="en"><title style='display:none'>The Lambda Method for the GNSS Compass</title>Global Navigation Satellite System carrier phase ambiguity resolution is the key to high precision positioning and attitude determination. In this contribution we consider the GNSS compass model. We derive the integer least-squares estimators and discuss the various steps involved in the ambiguity resolution process. This includes the method that has successfully been used in (<italic>Park and Teunissen</italic>, 2003). We emphasize the unaided, single frequency, single epoch case, since this is considered the most challenging mode of GNSS attitude determination.</abstract>

The Lambda Method for the GNSS Compass

<abstract><title style='display:none'>ABSTRACT</title>How to accelerate signal acquisition and shorten starting time are key problems in the Global Positioning System (GPS). GPS satellite almanac plays an important role in signal reception period. Almanac accuracy directly affects the speed of GPS signal acquisition, the start time of the receiver, and even the system performance to some extent. Combined with precise ephemeris products released by the International GNSS Service (IGS), the authors analyse GPS satellite almanac from the first day to the third day in the 1805th GPS week (from August 11 to 13, 2014 in the Gregorian calendar). The results show that mean of position errors in three-dimensional coordinate system varies from about 1 kilometer to 3 kilometers, which can satisfy the needs of common users.</abstract>

Positional Accuracy of Gps Satellite Almanac

<abstract xml:lang="en"><title style='display:none'>The Benefits of Inclined-Orbit Operations for Geostationary Orbit Communication Satellites</title>Geostationary orbit (GEO) communication satellites can be extended in lifetime by switching to inclined-orbit operations. In this mode, a small amount of propellant is reserved to maintain the assigned orbit longitude. Inclination is allowed to build up at a rate of approximately 0.8○ per year. Developing these space resources can bring out a number of benefits. Besides communication application, these satellites can be used to construct navigation constellation of the Chinese Area Positioning System (CAPS). In this present paper, the realization way of communication and navigation applications is studied and the benefits and problems are explained.</abstract>

The Benefits of Inclined-Orbit Operations for Geostationary Orbit Communication Satellites

<abstract><title style='display:none'>Abstract</title>The Global Positioning System (GPS) user makes use of the navigation message transmitted from GPS satellites to achieve its location. Because the receiver uses the satellite's location in position calculations, an ephemeris error, a difference between the expected and actual orbital position of a GPS satellite, reduces user accuracy. The influence extent is decided by the precision of broadcast ephemeris from the control station upload. Simulation analysis with the Yuma almanac show that maximum positioning error exists in the case where the ephemeris error is along the line-of-sight (LOS) direction. Meanwhile, the error is dependent on the relationship between the observer and spatial constellation at some time period.</abstract>

Influence of Ephemeris Error on GPS Single Point Positioning Accuracy

<abstract xml:lang="en"><title style='display:none'>Static Network Code Dgps Positioning vs. Carrier Phase Single Baseline Solutions for Short Observation time and Medium-Long Distances</title>GPS land surveys are usually based on the results of processing GPS carrier phase data. Code or pseudorange observations due to considerations of accuracy requirements and robustness are preferred in navigation and some GIS applications. Generally, the accuracy of that positioning is in the range of about 1-2 meters or so, on average. But the main problem in code GPS positioning is to know how to estimate the real accuracy of DGPS positions. It is not such an easy process in code positioning when one reference station is used. In most commercial software, there are no values of accuracy but only positions are presented. DGPS positions without estimated errors cannot be used for surveying tasks and for most GIS applications due to the fact that every point has to be have accuracy determined. However, when we used static GPS positioning, it is well known that the accuracy is determined, both during baseline processing and next by the adjustment of a GPS network. These steps of validation with redundancy in classical static phase baseline solutions allow wide use of static or rapid static methods in the main land surveying tasks. Although these control steps are commonly used in many major surveying and engineering tasks, they are not always effective in terms of short-observation-time sessions. This paper presents a new network DGPS approach of positioning with the use of at least three reference stations. The approach concerns also valid accuracy estimation based on variance-covariance (VC) matrix in the least-squares (LS) calculations. The presented network DGPS approach has the ability of reliable accuracy estimation. Finally, network DGPS positioning is compared with static baselines solutions where five-min sessions were taken into consideration for two different rover stations. It was shown that in a short observation time of GPS positioning, code network DGPS results can give even centimetre accuracy and can be more reliable than static relative phase positioning where gross errors often happen.</abstract>

Static Network Code Dgps Positioning vs. Carrier Phase Single Baseline Solutions for Short Observation time and Medium-Long Distances

<abstract>
<title style='display:none'>Abstract</title>
<italic>In situ</italic> resource utilization (ISRU) activities are receiving increasing attention, both from space agencies and among the international science and industrial community. Prominent examples of ongoing ISRU space programs are the NASA Artemis program and the Terrae Novae program run by the European Space Agency. In technical sciences, there are at least three groups of activities related to ISRU: prospecting bodies in the context of space missions, technological investigations related to surface infrastructure and operations, and conceptual analyses of future mining activities. The present paper belongs to the third group and brings new insights into a potential open pit mine operating on the Moon. There are several novel contributions: the definition of the objectives of the mine, based on economic indicators; a conceptual description of a pit architecture dedicated to excavating ilmenite-rich feedstock; and a qualitative and quantitative description of the chosen processes and the mine’s topology. In the paper, there are also added links to other papers connected with ISRU activities.
</abstract>

A Conceptual Open Pit Mine Architecture for the Moon Environment

<abstract>
<title style='display:none'>Abstract</title>
Nowadays, space debris is one of the main subjects of discussion regarding satellites in Earth's orbit. Right now, there are about 26,000 orbiting satellites and only few of these satellites are operational. Recently, the Polish space sector has been strongly growing and delivering instruments working in space. The first part of this paper describes the several space instruments designed in the Space Research Centre Polish Academy of Science (SRC PAS). Instruments such as SWI, RPPWI, LPPWI, Ebox or Pre-boxes have been created for a mission to Jupiter named “JUICE”. After fulfilling their scientific mission, these instruments can increase the amount of debris in space. This is one of the reasons for taking up the topic of space debris reduction and the use of technical solutions used in this mission for the proposed solution presented later.
The second part of this paper describes the new methods related to space debris. The activities can be related to the space debris removal programmes. The paper describes two methods developed by Polish scientists used for removal of space debris. One of them is the new capture method and mechanism designed for it. The special mechanism is based on tubular boom application for opening the net, to capture the space debris. The main parts of the mechanism are mechanisms which have been used in the JUICE space mission. The paper describes the main idea for these new methods, and for the design part prepared the strength confirmation by structural analysis. The main function of the mechanism has been verified by simulations and tests performed in laboratories.
</abstract>

Space Debris Capture - About New Methods of Tethered Space Net Opening by Tubular Booms

<abstract>
<title style='display:none'>Abstract</title>
Since more than 10 years, the Earth system modeling group at GFZ (ESMGFZ) provides effective angular momentum (EAM) functions for Earth orientation parameter assessment on a routinely daily basis. In addition to EAM of the individual Earth’s subsystems atmosphere, ocean, and hydrology, the global mass balance is calculated as barystatic sea level variation by solving explicitly the sea-level equation. ESMGFZ provides also 6-day forecasts for all of these EAM products. EAM forecasts are naturally degraded by forecast errors that typically grow with increasing forecast length, but they also show recurring patterns with occasionally higher errors at very short forecast horizons. To characterize such errors which are not randomly distributed in time, we divided the errors into a systematic and a stochastic contribution. In an earlier study, we were able to detect and remove the large systematic fraction occurring in the atmospheric angular momentum (AAM) wind term forecast errors with a cascading forward neural network model, thereby reducing the total forecast error by about 50%. In contrast, we were not able to remove the random error component assed in this study. Nevertheless, we show that machine learning methods are able to predict quasi-daily variations in time variable EAM forecasts error levels. We plan to provide these forecast error estimates along with the deterministic EAM forecast products for subsequent use in, for example, EOP Kalman filter prediction schemes.
</abstract>

ESMGFZ EAM Products for EOP Prediction: Toward the Quantification of Time Variable EAM Forecast Errors

<abstract>
<title style='display:none'>Abstract</title>
Global Navigation Satellite Systems (GNSSs) are one of the techniques that can be used for the deformation monitoring caused by earthquakes. GNSSs enable the monitoring of specific areas affected by earthquakes in real-time and post-processing modes. This paper provides a novel method for the short-term displacement detection based on the phase residuals of GNSS observations. The study examines a natural earthquake from October 26, 2016, in Italy with Mw 6.1. In the proposed methodology, the residuals of the GNSS phase observations are derived using Precise Point Positioning. Then, residuals are transformed to the frequency domain using a wavelet transform, and the earthquake moment is identified using the anomalies detected in the scalogram, which do not appear in stable conditions. The described methodology allows for detecting the starting and ending moments of the earthquake. The methods described detected that the moment of the earthquake is visible in the residues 8 seconds after the seismic catalog time. The conducted experiments show that the use of signal analysis tools allows it to properly detect the ground vibrations in the residuals of GNSS phase observations and thus confirms the registration of ground vibrations in satellite observation data recorded by a GNSS receiver.
</abstract>

Using GNSS Phase Observation Residuals and Wavelet Analysis to Detect Earthquakes

<abstract>
<title style='display:none'>Abstract</title>
This paper presents an R-based approach to mapping dynamics of the flooded areas in the Inner Niger Delta (IND), Mali, using time series analysis of Landsat 8–9 satellite images. As the largest inland wetland in West Africa, the habitats of IND offers high potential for biodiversity of the flood-dependent eco systems. IND is one of the most productive areas in West Africa. Mapping flooded areas based on satellite images enables to provide strategies for land management and rice planting and modelling vegetation types of IND. Our approach is based on using libraries of R programming language for processing six Landsat images, and each image was taken on November from 2013 to 2022. By capturing spatial and temporal structures of the satellite images on 2013, 2015, 2018, 2020, 2021 and 2022, the remote sensing data are combined to yield estimates of landscape dynamics that is temporally coherent, while helping to analyse fluctuations of spatial extent in fluvial wetlands caused by the hydrological processes of seasonal flooding. Further, by allowing packages of R to support image processing, an approach to mapping vegetation by NDVI, SAVI and EVI indices and visualising changes in distribution of different land cover classes over time is realised. In this context, processing Earth observation data by advanced scripting tools of R language provides new insights into complex interlace of climate-hydrological processes and vegetation responses. Our study contributes to the sustainable management of natural resources and improving knowledge on the functioning of IND ecosystems in Mali, West Africa.
</abstract>

Time Series Analysis of Landsat Images for Monitoring Flooded Areas in the Inner Niger Delta, Mali

<abstract>
<title style='display:none'>Abstract</title>
Our research aims to evaluate the triple-frequency GPS/Galileo/BeiDou kinematic precise point positioning (PPP) accuracy for the international maritime organization (IMO) positioning accuracy and integrity requirements. The real-time Centre National d’Etudes Spatiales (CNES) satellite orbit and clock products are used to simulate real-time scenarios. GPS/Galileo/BeiDou observations are collected from a moving vessel. Both dual-frequency and triple-frequency ionosphere-free PPP models are developed. Different satellite system combinations are used, including GPS-only, GPS/Galileo, GPS/BeiDou, and GPS/Galileo/BeiDou. The GPS-only differential solution is used as a reference. It is found that both dual- and triple-frequency kinematic PPP solutions achieve the IMO accuracy requirements at 95% confidence level for ocean, coastal, port approach, port, inland waterways, and track control navigation applications, except the automatic docking application. Moreover, the PPP solutions fulfilled the IMO integrity requirements for all navigation phase applications, but the GPS and GPS/BeiDou PPP solutions did not fulfill the automatic docking integrity requirement.
</abstract>

Evaluation of Triple-Frequency GPS/Galileo/Beidou Kinematic Precise Point Positioning Using Real-Time CNES Products for Maritime Applications

<abstract xml:lang="en"><title style='display:none'>A General Multivariate Formulation of the Multi-Antenna GNSS Attitude Determination Problem</title>Global Navigation Satellite System (GNSS) carrier phase ambiguity resolution is the key to high precision positioning, navigation and attitude determination. In this contribution we present a general formulation for the multi-antenna GNSS attitude determination problem. This multivariate formulation provides a general framework for solving various GNSS attitude determination problems. With the use of this formulation we show how the constrained integer least-squares carrier phase ambiguities and corresponding attitude matrix can be solved.</abstract>

A General Multivariate Formulation of the Multi-Antenna GNSS Attitude Determination Problem

<abstract><title style='display:none'>Abstract</title>Digital Elevation Models (DEMs) comprise valuable source of elevation data required for many engineering applications. Contour lines, slope - aspect maps are part of their many uses. Moreover, DEMs are used often in geographic information systems (GIS), and are the most common basis for digitally-produced relief maps. This paper proposes a method of generating DEM by using Google Earth elevation data which is easier and free. The case study consisted of three different small regions in the northern beach in Egypt. The accuracy of the Google earth derived elevation data are reported using root mean square error (RMSE), mean error (ME) and maximum absolute error (MAE). All these accuracy statistics were computed using the ground coordinates of 200 reference points for each region of the case study. The reference data was collected with total station survey. The results showed that the accuracies for the prepared DEMs are suitable for some certain engineering applications but inadequate to meet the standard required for fine/small scale DEM for very precise engineering study. The obtained accuracies for terrain with small height difference can be used for preparing large area cadastral, city planning, or land classification maps.In general, Google Earth elevation data can be used only for investigation and preliminary studies with low cost. It is strongly concluded that the users of Google Earth have to test the accuracy of elevation data by comparing with reference data before using it.</abstract>

Investigation of the Accuracy of Google Earth Elevation Data

<abstract><title style='display:none'>ABSTRACT</title> Google Earth is a virtual globe, map and geographical information program that is controlled by Google corporation. It maps the Earth by the superimposition of images obtained from satellite imagery, aerial photography and GIS 3D globe. With millions of users all around the globe, GoogleEarth® has become the ultimate source of spatial data and information for private and public decision-support systems besides many types and forms of social interactions. Many users mostly in developing countries are also using it for surveying applications, the matter that raises questions about the positional accuracy of the Google Earth program. This research presents a small-scale assessment study of the positional accuracy of GoogleEarth® Imagery in Riyadh; capital of Kingdom of Saudi Arabia (KSA). The results show that the RMSE of the GoogleEarth imagery is 2.18 m and 1.51 m for the horizontal and height coordinates respectively.</abstract>

College of Engineering, Aswan University, Aswan, Egypt

College of Engineering, King Saud University, Riyadh, KSA

Positional Accuracy Assessment of Googleearth in Riyadh

<abstract xml:lang="en"><title style='display:none'>Sensitivity of Lageos Orbits to Global Gravity Field Models</title>Precise orbit determination is an essential task when analyzing SLR data. The quality of the satellite orbits strongly depends on the models used for dynamic orbit determination. The global gravity field model used is one of the crucial elements, which has a significant influence on the satellite orbit and its accuracy. We study the impact of different gravity field models on the determination of the LAGEOS-1 and -2 orbits for data of the year 2008. Eleven gravity field models are compared, namely JGM3 and EGM96 based mainly on SLR, terrestrial and altimetry data, AIUB-CHAMP03S based uniquely on GPS-measurements made by CHAMP, AIUB-GRACE03S, ITG-GRACE2010 based on GRACE data, and the combined gravity field models based on different measurement techniques, such as EGM2008, EIGEN-GL04C, EIGEN51C, GOCO02S, GO-CONS-2-DIR-R2, AIUB-SST. The gravity field models are validated using the RMS of the observation residuals of 7-day LAGEOS solutions. The study reveals that GRACE-based models have the smallest RMS values (i.e., about 7.15 mm), despite the fact that no SLR data were used to determine them. The coefficient C20 is not always well estimated in GRACE-only models. There is a significant improvement of the gravity field models based on CHAMP, GRACE and GOCE w.r.t. models of the pre-CHAMP era. The LAGEOS orbits are particularly sensitive to the long wavelength part of the gravity fields. Differences of the estimated orbits due to different gravity field models are noticeable up to degree and order of about 30. The RMS of residuals improves from about 40 mm for degree 8, to about 7 mm for the solutions up to degrees 14 and higher. The quality of the predicted orbits is studied, as well.</abstract>

Sensitivity of Lageos Orbits to Global Gravity Field Models

<abstract><title style='display:none'>Abstract</title> On April 1, 2013 IGS launched the real-time service providing products for Precise Point Positioning (PPP). The availability of real-time makes PPP a very powerful technique to process GNSS signals in real-time and opens a new PPP applications opportunities. There are still, however, some limitations of PPP, especially in the kinematic mode. A significant change in satellite geometry is required to efficiently de-correlate troposphere delay, receiver clock offset, and receiver height. In order to challenge PPP limitations, the GNSS-WARP (Wroclaw Algorithms for Real-time Positioning) software has been developed from scratch at Wroclaw University of Environmental and Life Science in Poland. This paper presents the GNSS-WARP software itself and some results of GNSS data analysis using PPP and PPP-RTK (Real-Time Kinematic) technique. The results of static and kinematic processing in GPS only and GPS + GLONASS mode with final and real-time products are presented. Software performance validation in postprocessing mode confirmed that the software can be considered as a state-ofthe- art software and used for further studies on PPP algorithm development. The real-time positioning test made it possible to assess the quality of real-time coordinates, which is a few millimeters for North, East, Up in static mode, a below decimeter in kinematic mode. The accuracy and precision of height estimates in kinematic mode were improved by constraining the solution with an external, near real-time troposphere model. The software also allows estimation of real-time ZTD, however, the obtained precision of 11.2 mm means that further improvements in the software, real-time products or processing strategy are required.</abstract>

GNSS-Warp Software for Real-Time Precise Point Positioning

Templates

Declaration

License to Publish

Artificial Satellites

The Journal of Space Research Centre of Polish Academy of Sciences

 Artificial Satellites is a journal of planetary geodesy, affiliated to the Space Research Centre, Polish Academy of Sciences. It offers a forum for scientific publications on such aspects of...

Impact Factor

Five Year Impact Factor

Cite Score

SNIP

MNiSW

 Artificial Satellites is a journal of planetary geodesy, affiliated to the Space Research Centre, Polish Academy of Sciences. It offers a forum for...

AHEAD OF PRINT

Volume 59 (2024): Issue 1 (March 2024)

Volume 58 (2023): Issue 4 (December 2023)

Volume 58 (2023): Issue 3 (September 2023)

Volume 58 (2023): Issue 2 (June 2023)

Volume 58 (2023): Issue 1 (March 2023)

Volume 58 (2023): Issue s1 (December 2023)

Volume 57 (2022): Issue 4 (December 2022)

Volume 57 (2022): Issue 3 (September 2022)

Volume 57 (2022): Issue 2 (June 2022)

Volume 57 (2022): Issue s1 (December 2022) Proceedings of the Second Earth Orientation Parameters Prediction Comparison Campaign (2nd EOP PCC) Workshop, online, February 15-16, 2022

Volume 57 (2022): Issue 1 (March 2022)

Volume 56 (2021): Issue 4 (December 2021)

Volume 56 (2021): Issue 3 (September 2021)

Volume 56 (2021): Issue 2 (June 2021)

Volume 56 (2021): Issue 1 (March 2021)

Volume 55 (2020): Issue 4 (December 2020)

Volume 55 (2020): Issue 3 (September 2020)

Volume 55 (2020): Issue 2 (June 2020)

Volume 55 (2020): Issue 1 (March 2020)

Volume 54 (2019): Issue 4 (December 2019)

Volume 54 (2019): Issue 3 (September 2019)

Volume 54 (2019): Issue 2 (June 2019)

Volume 54 (2019): Issue 1 (March 2019)

Volume 53 (2018): Issue 4 (December 2018)

Volume 53 (2018): Issue 3 (September 2018)

Volume 53 (2018): Issue 2 (June 2018)

Volume 53 (2018): Issue 1 (March 2018)

Volume 52 (2017): Issue 4 (December 2017)

Volume 52 (2017): Issue 3 (September 2017)

Volume 52 (2017): Issue 2 (June 2017)

Volume 52 (2017): Issue 1 (March 2017)

Volume 51 (2016): Issue 4 (December 2016)

Volume 51 (2016): Issue 3 (September 2016)

Volume 51 (2016): Issue 2 (June 2016)

Volume 51 (2016): Issue 1 (March 2016)

Volume 50 (2015): Issue 4 (December 2015)

Volume 50 (2015): Issue 3 (September 2015)

Volume 50 (2015): Issue 2 (June 2015)

Volume 50 (2015): Issue 1 (March 2015)

Volume 49 (2014): Issue 4 (December 2014)

Volume 49 (2014): Issue 3 (September 2014)

Volume 49 (2014): Issue 2 (June 2014)

Volume 49 (2014): Issue 1 (March 2014)

Volume 48 (2013): Issue 4 (December 2013)

Volume 48 (2013): Issue 3 (September 2013)

Volume 48 (2013): Issue 2 (June 2013)

Volume 48 (2013): Issue 1 (March 2013)

Volume 47 (2012): Issue 4 (December 2012)

Volume 47 (2012): Issue 3 (September 2012)

Volume 47 (2012): Issue 2 (June 2012)

Volume 47 (2012): Issue 1 (March 2012)

Volume 46 (2011): Issue 4 (December 2011) Proceedings of the Conference on "Satelitarne metody wyznaczania pozycji we wspólczesnej geodezji i nawigacji" held in Wroclaw, Poland, June 2-4, 2011 - Part II

Volume 46 (2011): Issue 3 (September 2011) Proceedings of the Conference on "Satelitarne metody wyznaczania pozycji we wspólczesnej geodezji i nawigacji" held in Wroclaw, Poland, June 2-4, 2011 - Part I

Volume 46 (2011): Issue 2 (June 2011)

Volume 46 (2011): Issue 1 (January 2011)

Volume 45 (2010): Issue 4 (December 2010)

Volume 45 (2010): Issue 3 (September 2010)

Volume 45 (2010): Issue 2 (June 2010) Proceedings of the IERS Workshop on EOP Combination and Prediction, Warsaw, 19-21 October 2009