<abstract xmlns="http://www.w3.org/1999/xhtml"><p>In the analysis of the reactive work of the Alden turbine, two systems of energy recovery were utilized: conical, a straight suction pipe, and a curved diffusor – the so-called bend. The simulations executed on both the systems allowed the operation and selected installation components to be described. Full distribution curves for pressures, velocities were presented, and spectral analyses of pressure fluctuations for the selected points over and under the turbine rotor were also performed. For some structural parts, by means of the FSI – Fluid System Interaction model – the distributions of main stresses and strains according to von Mises theory were illustrated. Additionally, the shapes of deformed installations parts caused by unsymmetrical loads generated mainly by a turbulent water flow were presented.</p></abstract>

In the analysis of the reactive work of the Alden turbine, two systems of energy recovery were utilized: conical, a straight suction pipe, and a curved diffusor – the so-called bend. The simulations executed on both the systems allowed the operation and selected installation components to be described. Full distribution curves for pressures, velocities were presented, and spectral analyses of pressure fluctuations for the selected points over and under the turbine rotor were also performed. For some structural parts, by means of the FSI – Fluid System Interaction model – the distributions of main stresses and strains according to von Mises theory were illustrated. Additionally, the shapes of deformed installations parts caused by unsymmetrical loads generated mainly by a turbulent water flow were presented.

The Analysis of the Reactive Work of the Alden Turbine

Technical Transactions

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

{"article-title":"The Analysis of the Reactive Work of the Alden Turbine"}

In the analysis of the reactive work of the Alden turbine, two systems of energy recovery were utilized: conical, a straight suction pipe, and a curved...

The Analysis of the Reactive Work of the Alden Turbine

Pubblicato online: 16 mag 2020

Pagine: 143 - 166

Ricevuto: 04 gen 2019

DOI: https://doi.org/10.4467/2353737XCT.19.010.10050

Parole chiave
hydropower, Alden turbine, hydrodynamic cavitation, hydrodynamic loads, vortex core, suction pipe

© 2020 Bernard Twaróg, published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

The Analysis of the Reactive Work of the Alden Turbine

Pubblicato online: 16 mag 2020

Pagine: 143 - 166

Ricevuto: 04 gen 2019

DOI: https://doi.org/10.4467/2353737XCT.19.010.10050

Parole chiavehydropower, Alden turbine, hydrodynamic cavitation, hydrodynamic loads, vortex core, suction pipe

© 2020 Bernard Twaróg, published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Parole chiave
hydropower, Alden turbine, hydrodynamic cavitation, hydrodynamic loads, vortex core, suction pipe