<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The paper investigates and compares a selected issue of Serviceability Limit State (SLS) of simply supported reinforced concrete (RC) beams subjected to various values of flexural stresses. Characteristic crack widths of beams reinforced with various types of bars were calculated. Beams reinforced with Glass Fiber Reinforced Polymer (GFRP), Carbon Fiber Reinforced Polymer (CFRP) and Aramid Fiber Reinforced Polymer (AFRP) were examined. The computational analysis of beams reinforced with FRP bars was based on Italian guideline for the design (CNR-DT 203/2006) and in accordance with the EC2 (EN 1992-1-1:2004). Based on the conducted analysis, the effect of changing the service live load on the increase in crack width was presented.</p></abstract>

The paper investigates and compares a selected issue of Serviceability Limit State (SLS) of simply supported reinforced concrete (RC) beams subjected to various values of flexural stresses. Characteristic crack widths of beams reinforced with various types of bars were calculated. Beams reinforced with Glass Fiber Reinforced Polymer (GFRP), Carbon Fiber Reinforced Polymer (CFRP) and Aramid Fiber Reinforced Polymer (AFRP) were examined. The computational analysis of beams reinforced with FRP bars was based on Italian guideline for the design (CNR-DT 203/2006) and in accordance with the EC2 (EN 1992-1-1:2004). Based on the conducted analysis, the effect of changing the service live load on the increase in crack width was presented.

Analysis of the crack width of beams reinforced with FRP bars

Department of Concrete Structures and Geotechnics, Faculty of Civil Engineering

Department of Structures and Bridges, Faculty of Civil Engineering

Technical Transactions

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

{"article-title":"Analysis of the crack width of beams reinforced with FRP bars"}

The paper investigates and compares a selected issue of Serviceability Limit State (SLS) of simply supported reinforced concrete (RC) beams subjected to...

Analysis of the crack width of beams reinforced with FRP bars

Pubblicato online: 23 mag 2020

Pagine: 163 - 168

Ricevuto: 29 ott 2018

DOI: https://doi.org/10.4467/2353737XCT.18.170.9426

Parole chiave
FRP reinforcement, RC beam, crack width, design recommendations, CNR-DT 203/2006

© 2018 Kinga Brózda et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Analysis of the crack width of beams reinforced with FRP bars

Pubblicato online: 23 mag 2020

Pagine: 163 - 168

Ricevuto: 29 ott 2018

DOI: https://doi.org/10.4467/2353737XCT.18.170.9426

Parole chiaveFRP reinforcement, RC beam, crack width, design recommendations, CNR-DT 203/2006

© 2018 Kinga Brózda et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Parole chiave
FRP reinforcement, RC beam, crack width, design recommendations, CNR-DT 203/2006