<abstract xmlns="http://www.w3.org/1999/xhtml">The selected indicators of machinability of NiTi based shape memory alloys has been examined. The paper presents research of possibilities of shape memory alloy like low-temperature (austenitic) Ni53Ti47 (Nitinol) with a coated cemented carbide tool, cutting force components (<italic>Ff</italic>–the feed force, <italic>Fp</italic>–the passive force, <italic>Fc</italic>–the main cutting force). In the work, a special attention was paid on the main cutting force components at variable cutting speed (<italic>vc</italic>).</abstract>

The selected indicators of machinability of NiTi based shape memory alloys has been examined. The paper presents research of possibilities of shape memory alloy like low-temperature (austenitic) Ni53Ti47 (Nitinol) with a coated cemented carbide tool, cutting force components (Ff–the feed force, Fp–the passive force, Fc–the main cutting force). In the work, a special attention was paid on the main cutting force components at variable cutting speed (vc).

Cutting Forces during Precise Turning of NiTi Shape Memory Alloy

Technical Transactions

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

{"article-title":"Cutting Forces during Precise Turning of NiTi Shape Memory Alloy"}

The selected indicators of machinability of NiTi based shape memory alloys has been examined. The paper presents research of possibilities of shape memory...

Cutting Forces during Precise Turning of NiTi Shape Memory Alloy

Pubblicato online: 26 mag 2020

Pagine: 137 - 146

DOI: https://doi.org/10.4467/2353737XCT.17.114.6655

Parole chiave
machinability, Nitinol, precise turning, cutting force

© 2020 Małgorzata Kowalczyk, published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Cutting Forces during Precise Turning of NiTi Shape Memory Alloy

Pubblicato online: 26 mag 2020

Pagine: 137 - 146

DOI: https://doi.org/10.4467/2353737XCT.17.114.6655

Parole chiavemachinability, Nitinol, precise turning, cutting force

© 2020 Małgorzata Kowalczyk, published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 Public License.

Parole chiave
machinability, Nitinol, precise turning, cutting force