<abstract xmlns="http://www.w3.org/1999/xhtml"><p>One of the modern methods of reducing vibrations of plates and beams is using piezoelectric materials in the form of distributed elements or patches (applied in a passive or an active system). However, for the multimodal response of a structure, there is no possibility to place the actuators in exactly the areas with maximum curvature values for each mode. Additionally, in the case of passive multimodal suppression systems – in which energy is needed to be supplied to the system – there is the necessity to create a complicated electrical circuit. The particular electrical shunts of the circuit are tuned to the specific vibration forms which require damping. The main objective of this article is to show the possibility of creating a multimodal vibration suppression system with typical resonant shunts and proposed second slightly modified.</p></abstract>

One of the modern methods of reducing vibrations of plates and beams is using piezoelectric materials in the form of distributed elements or patches (applied in a passive or an active system). However, for the multimodal response of a structure, there is no possibility to place the actuators in exactly the areas with maximum curvature values for each mode. Additionally, in the case of passive multimodal suppression systems – in which energy is needed to be supplied to the system – there is the necessity to create a complicated electrical circuit. The particular electrical shunts of the circuit are tuned to the specific vibration forms which require damping. The main objective of this article is to show the possibility of creating a multimodal vibration suppression system with typical resonant shunts and proposed second slightly modified.

The verification of a piezoelectric vibration-suppression system with a multimode basic RLC shunt circuit and its comparison to a multi-mode current-flowing shunt circuit

Department of Automatic Control and Information Technology, Faculty of Electrical and Computer Engineering

Technical Transactions

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

One of the modern methods of reducing vibrations of plates and beams is using piezoelectric materials in the form of distributed elements or patches (applied...

The verification of a piezoelectric vibration-suppression system with a multimode basic RLC shunt circuit and its comparison to a multi-mode current-flowing shunt circuit

Pubblicato online: 06 apr 2020

Pagine: -

Ricevuto: 19 ott 2018

Accettato: 25 mar 2020

DOI: https://doi.org/10.37705/TechTrans/e2020002

Parole chiave
piezoelectric materials, piezoelectric effect, passive methods, vibration damping

© 2020 Łukasz Ścisło et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

The verification of a piezoelectric vibration-suppression system with a multimode basic RLC shunt circuit and its comparison to a multi-mode current-flowing shunt circuit

Pubblicato online: 06 apr 2020

Pagine: -

Ricevuto: 19 ott 2018

Accettato: 25 mar 2020

DOI: https://doi.org/10.37705/TechTrans/e2020002

Parole chiavepiezoelectric materials, piezoelectric effect, passive methods, vibration damping

© 2020 Łukasz Ścisło et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Parole chiave
piezoelectric materials, piezoelectric effect, passive methods, vibration damping