<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The paper aims to present the basic properties of cold mixes in terms of the type of binding agent. In the theoretical part of the article, a description of the technology for producing cold recycled mixtures and the types of road binders used in cold mixtures was presented. The research part presents the experimental design, and gives an overview of the research methodology used to assess the impact of the type of binding agent. Mixes differing in type and binder content were designed. During the laboratory work, mixtures were prepared with cement binder (CBGM), cement-modified polymer binder (CBGM+P), mineral-cement-emulsion modified with polymer binder (BE-RCM+P), and mineral-cement mixtures with foamed bitumen modified with polymer binder (FB-RCM+P). The project aimed to produce cold mixtures with variations in the type and amount of binder used. The mixtures were prepared using cold mix technology. The effect of the binder on the cold mix properties was studied. During the research, the following properties were examined: void content (V<sub>m</sub>), indirect tensile strength (ITS), resistance to water damage (TSR), stiffness modulus using the IT-CY method and an axial compressive strength. On the basis of the research carried out, an analysis was made. Among other things, the polymer modification was found to have a positive effect on the void content of the mix. The research carried out in this way made it possible to show the influence of the binder on the properties of cold mixes.</p>
</abstract>

The paper aims to present the basic properties of cold mixes in terms of the type of binding agent. In the theoretical part of the article, a description of the technology for producing cold recycled mixtures and the types of road binders used in cold mixtures was presented. The research part presents the experimental design, and gives an overview of the research methodology used to assess the impact of the type of binding agent. Mixes differing in type and binder content were designed. During the laboratory work, mixtures were prepared with cement binder (CBGM), cement-modified polymer binder (CBGM+P), mineral-cement-emulsion modified with polymer binder (BE-RCM+P), and mineral-cement mixtures with foamed bitumen modified with polymer binder (FB-RCM+P). The project aimed to produce cold mixtures with variations in the type and amount of binder used. The mixtures were prepared using cold mix technology. The effect of the binder on the cold mix properties was studied. During the research, the following properties were examined: void content (Vm), indirect tensile strength (ITS), resistance to water damage (TSR), stiffness modulus using the IT-CY method and an axial compressive strength. On the basis of the research carried out, an analysis was made. Among other things, the polymer modification was found to have a positive effect on the void content of the mix. The research carried out in this way made it possible to show the influence of the binder on the properties of cold mixes.

Influence of the Binder on the Properties of Cold Mixtures

Structure and Environment

This work is licensed under the Creative Commons Attribution 3.0 Public License.

{"article-title":"Influence of the Binder on the Properties of Cold Mixtures"}

The paper aims to present the basic properties of cold mixes in terms of the type of binding agent. In the theoretical part of the article, a description of...

Influence of the Binder on the Properties of Cold Mixtures

Pubblicato online: 02 feb 2024

Pagine: 185 - 195

DOI: https://doi.org/10.30540/sae-2023-016

Parole chiave
cold mixture, recycling, substructure, foamed asphalt, asphalt emulsion, hydraulic binder, modification

© 2023 Maciej Krasowski et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 3.0 Public License.

Influence of the Binder on the Properties of Cold Mixtures

Pubblicato online: 02 feb 2024

Pagine: 185 - 195

DOI: https://doi.org/10.30540/sae-2023-016

Parole chiavecold mixture, recycling, substructure, foamed asphalt, asphalt emulsion, hydraulic binder, modification

© 2023 Maciej Krasowski et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 3.0 Public License.

Parole chiave
cold mixture, recycling, substructure, foamed asphalt, asphalt emulsion, hydraulic binder, modification