<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Methanol and acetonitrile form a minimum azeotrope at 336.74 K, which contains methanol 76.89 mas%. The simulation and the experiment to separate the mixture by batch extractive distillation using aniline as entrainer is performed. Based on the experimental and simulative VLE data, aniline is chosen to be the suitable solvent. The sensitivity analysis about the number of stages, the refl ux ratio, the solvent feed stage and the solvent fl ow rate is conducted to obtain the optimal parameters and confi guration of the extractive distillation column with minimal energy requirements. The most appropriate confi guration is 30 theoretical stages. The optimal entrainer feeding stage is 8 with a solvent fl ow rate of 20kg/h and the refl ux ratio of 2.0, respectively. The simulation results show the effect of the main variables on the extractive distillation process. The experiment is carried out to corroborate the feasibility of the separation of methanol-acetonitrile by batch extractive distillation.</p></abstract>

Methanol and acetonitrile form a minimum azeotrope at 336.74 K, which contains methanol 76.89 mas%. The simulation and the experiment to separate the mixture by batch extractive distillation using aniline as entrainer is performed. Based on the experimental and simulative VLE data, aniline is chosen to be the suitable solvent. The sensitivity analysis about the number of stages, the refl ux ratio, the solvent feed stage and the solvent fl ow rate is conducted to obtain the optimal parameters and confi guration of the extractive distillation column with minimal energy requirements. The most appropriate confi guration is 30 theoretical stages. The optimal entrainer feeding stage is 8 with a solvent fl ow rate of 20kg/h and the refl ux ratio of 2.0, respectively. The simulation results show the effect of the main variables on the extractive distillation process. The experiment is carried out to corroborate the feasibility of the separation of methanol-acetonitrile by batch extractive distillation.

Batch extractive distillation of mixture methanol-acetonitrile using aniline as a asolvent

School of Chemical Engineering and Technology, Tianjin University, Key Laboratory of Systems Bioengineering, Ministry of Education, Tianjin University, Tianjin 300072, China

Polish Journal of Chemical Technology

Methanol and acetonitrile form a minimum azeotrope at 336.74 K, which contains methanol 76.89 mas%. The simulation and the experiment to separate the mixture...

Batch extractive distillation of mixture methanol-acetonitrile using aniline as a asolvent

Pubblicato online: 31 ott 2012

Pagine: 48 - 53

DOI: https://doi.org/10.2478/v10026-012-0083-4

Parole chiave
Batch extractive distillation, methanol, acetonitrile, aniline, simulation

This content is open access.

Batch extractive distillation of mixture methanol-acetonitrile using aniline as a asolvent

Pubblicato online: 31 ott 2012

Pagine: 48 - 53

DOI: https://doi.org/10.2478/v10026-012-0083-4

Parole chiaveBatch extractive distillation, methanol, acetonitrile, aniline, simulation

This content is open access.

Parole chiave
Batch extractive distillation, methanol, acetonitrile, aniline, simulation