<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml"><p>Emulsion liquid membrane technique (ELM) was used for the extraction of phenol from synthetic and industrial effluents. In this study, the liquid membrane used for phenol removal was composed of kerosene as the solvent, Span-80 as the surfactant and Sodium hydroxide as an internal reagent. Statistical experimental design was applied for the optimization of process parameters for the removal of phenol by ELM. The effects of process parameters namely, Surfactant concentration, membrane or organic to internal phase ratio (M/I) and emulsion to an external phase ratio (E/E) on the removal of phenol were optimized using a response surface method. The optimum conditions for the extraction of phenol using Response surface methodology were: surfactant concentration - 4.1802%, M/I ratio: 0.9987(v/v), and E/E ratio: 0.4718 (v/v). Under the optimized condition the maximum phenol extraction was found to be 98.88% respectively.</p></abstract>

Emulsion liquid membrane technique (ELM) was used for the extraction of phenol from synthetic and industrial effluents. In this study, the liquid membrane used for phenol removal was composed of kerosene as the solvent, Span-80 as the surfactant and Sodium hydroxide as an internal reagent. Statistical experimental design was applied for the optimization of process parameters for the removal of phenol by ELM. The effects of process parameters namely, Surfactant concentration, membrane or organic to internal phase ratio (M/I) and emulsion to an external phase ratio (E/E) on the removal of phenol were optimized using a response surface method. The optimum conditions for the extraction of phenol using Response surface methodology were: surfactant concentration - 4.1802%, M/I ratio: 0.9987(v/v), and E/E ratio: 0.4718 (v/v). Under the optimized condition the maximum phenol extraction was found to be 98.88% respectively.

Optimization of process parameters using response surface methodology for the removal of phenol by emulsion liquid membrane

Department of Petrochemical Technology, Anna University of Technology Tiruchirappalli, Tiruchirappalli-620 024, Tamil Nadu, India

Polish Journal of Chemical Technology

Emulsion liquid membrane technique (ELM) was used for the extraction of phenol from synthetic and industrial effluents. In this study, the liquid membrane used...

Optimization of process parameters using response surface methodology for the removal of phenol by emulsion liquid membrane

Pubblicato online: 03 apr 2012

Pagine: 46 - 49

DOI: https://doi.org/10.2478/v10026-012-0058-5

Parole chiave
Emulsion Liquid membrane, Response Surface Methodology, Phenol, Surfactant

This content is open access.

Optimization of process parameters using response surface methodology for the removal of phenol by emulsion liquid membrane

Pubblicato online: 03 apr 2012

Pagine: 46 - 49

DOI: https://doi.org/10.2478/v10026-012-0058-5

Parole chiaveEmulsion Liquid membrane, Response Surface Methodology, Phenol, Surfactant

This content is open access.

Parole chiave
Emulsion Liquid membrane, Response Surface Methodology, Phenol, Surfactant