<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml">Powders of two molybdenum carbides (Mo2C and MoC1-x) and tungsten carbide (WC) were prepared by means of temperature programmed reaction (TPR) method. Mo2C and MoC1-x were synthesized by reacting MoO3 with a preselected molar ratio of methane/hydrogen and carbon monoxide/hydrogen gas mixtures respectively. WC was prepared using tungsten oxide (WO3) and a methane/hydrogen gas mixture. These carbides were ultrasonically dispersed in de-ionized water. Samples were characterized using room temperature x-ray diffraction and scanning microscopy. A kinetic diffusion model is also studied to determine diffusivities in solids where the diffusing species desorbs or reacts at the external surfaces, and where the diffusivity does not vary appreciably with concentrations. The method involves measuring the flux of the diffusive species into the solid under the influence of a temperature program.</abstract>

Powders of two molybdenum carbides (Mo2C and MoC1-x) and tungsten carbide (WC) were prepared by means of temperature programmed reaction (TPR) method. Mo2C and MoC1-x were synthesized by reacting MoO3 with a preselected molar ratio of methane/hydrogen and carbon monoxide/hydrogen gas mixtures respectively. WC was prepared using tungsten oxide (WO3) and a methane/hydrogen gas mixture. These carbides were ultrasonically dispersed in de-ionized water. Samples were characterized using room temperature x-ray diffraction and scanning microscopy. A kinetic diffusion model is also studied to determine diffusivities in solids where the diffusing species desorbs or reacts at the external surfaces, and where the diffusivity does not vary appreciably with concentrations. The method involves measuring the flux of the diffusive species into the solid under the influence of a temperature program.

Synthesis and characterization of nanostructured molybdenum &amp; tungsten carbide materials, and study of diffusion model

Department of Chemical Engineering, North Carolina A&T State University, 1601 E Market St, NC 27411, USA

Polish Journal of Chemical Technology

Synthesis and characterization of nanostructured molybdenum & tungsten carbide materials, and study of diffusion model

Powders of two molybdenum carbides (Mo2C and MoC1-x) and tungsten carbide (WC) were prepared by means of temperature programmed reaction (TPR) method. Mo2C and...

Synthesis and characterization of nanostructured molybdenum & tungsten carbide materials, and study of diffusion model

Pubblicato online: 03 apr 2012

Pagine: 28 - 34

DOI: https://doi.org/10.2478/v10026-012-0055-8

Parole chiave
molybdenum carbide, tungsten carbide, temperature programmed reaction, sonochemistry, nanostructure

This content is open access.

Synthesis and characterization of nanostructured molybdenum & tungsten carbide materials, and study of diffusion model

Pubblicato online: 03 apr 2012

Pagine: 28 - 34

DOI: https://doi.org/10.2478/v10026-012-0055-8

Parole chiavemolybdenum carbide, tungsten carbide, temperature programmed reaction, sonochemistry, nanostructure

This content is open access.

Parole chiave
molybdenum carbide, tungsten carbide, temperature programmed reaction, sonochemistry, nanostructure