<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml"><p>Plastics are the widely used materials and their application increases every year considerably. Therefore, appropriate waste management policy should be used in relation to the utilization or recycling of scrap plastic components. Although most of these materials refer to thermoplastics, a huge widening demand is observed in the field of thermosets. They find a wide range of applications as the dielectric or insulating materials, high-current breaker switches, sensors and other electrical and electronic devices, as well as high-resistant sleeves in mechanical devices. The substantial part of the thermohardening products is used in a car, heavy, light, chemical industry and agriculture as well. The thermohardening wastes contain a large amount of combustible fraction as thermosetting resins, and various materials as a different kind of metals group like ferromagnetic and copper. Therefore, they are potential sources of energy and secondary materials. Application of thermal methods for the utilization of these wastes in the pyrolysis process was investigated. The development of the utilization of these wastes with the possibility of gas and liquid substance recovery as a potential source of energy on a commercial scale is the main aim of this paper.</p></abstract>

Plastics are the widely used materials and their application increases every year considerably. Therefore, appropriate waste management policy should be used in relation to the utilization or recycling of scrap plastic components. Although most of these materials refer to thermoplastics, a huge widening demand is observed in the field of thermosets. They find a wide range of applications as the dielectric or insulating materials, high-current breaker switches, sensors and other electrical and electronic devices, as well as high-resistant sleeves in mechanical devices. The substantial part of the thermohardening products is used in a car, heavy, light, chemical industry and agriculture as well. The thermohardening wastes contain a large amount of combustible fraction as thermosetting resins, and various materials as a different kind of metals group like ferromagnetic and copper. Therefore, they are potential sources of energy and secondary materials. Application of thermal methods for the utilization of these wastes in the pyrolysis process was investigated. The development of the utilization of these wastes with the possibility of gas and liquid substance recovery as a potential source of energy on a commercial scale is the main aim of this paper.

Waste management of half-finished products and thermosetting wastes

Department of Heat Engineering and Environmental Protection, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland

Polish Journal of Chemical Technology

{"article-title":"Waste management of half-finished products and thermosetting wastes"}

Plastics are the widely used materials and their application increases every year considerably. Therefore, appropriate waste management policy should be used...

Waste management of half-finished products and thermosetting wastes

Pubblicato online: 06 nov 2007

Pagine: 122 - 126

DOI: https://doi.org/10.2478/v10026-007-0070-3

Parole chiave
plastic waste, thermosetting waste, pyrolysis utilization

This content is open access.

Waste management of half-finished products and thermosetting wastes

Pubblicato online: 06 nov 2007

Pagine: 122 - 126

DOI: https://doi.org/10.2478/v10026-007-0070-3

Parole chiaveplastic waste, thermosetting waste, pyrolysis utilization

This content is open access.

Parole chiave
plastic waste, thermosetting waste, pyrolysis utilization