<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml"><p>The application of Reaction Injection Molding (RIM) technique for forming an elastic polyurethane coating that displays selected strength characteristics, and chemical and thermal resistance is described. The study was conducted on technical-scale using a mixing-dosing device that allowed direct dosing of liquid polyurethane system into the steel bulkhead, onto the steel surfaces, and the formation of polyurethane coating. Hard coating formed after polymer gelation and crosslinking. The elaborated technology also allowed joining of ceramsite concrete which resulted in the sandwich costruction consisting of steel, concrete and polyurethane.</p></abstract>

The application of Reaction Injection Molding (RIM) technique for forming an elastic polyurethane coating that displays selected strength characteristics, and chemical and thermal resistance is described. The study was conducted on technical-scale using a mixing-dosing device that allowed direct dosing of liquid polyurethane system into the steel bulkhead, onto the steel surfaces, and the formation of polyurethane coating. Hard coating formed after polymer gelation and crosslinking. The elaborated technology also allowed joining of ceramsite concrete which resulted in the sandwich costruction consisting of steel, concrete and polyurethane.

Advanced coating of Tank Interior as means of Rising Environmental Safety of Tankers/RIM technology

Polish Maritime Research

The application of Reaction Injection Molding (RIM) technique for forming an elastic polyurethane coating that displays selected strength characteristics, and...

Advanced coating of Tank Interior as means of Rising Environmental Safety of Tankers/RIM technology

Pubblicato online: 06 ott 2008

Pagine: 31 - 34

DOI: https://doi.org/10.2478/v10012-007-0075-0

Parole chiave
polyurethane elastomers, RIM, applications

This content is open access.

Advanced coating of Tank Interior as means of Rising Environmental Safety of Tankers/RIM technology

Pubblicato online: 06 ott 2008

Pagine: 31 - 34

DOI: https://doi.org/10.2478/v10012-007-0075-0

Parole chiavepolyurethane elastomers, RIM, applications

This content is open access.

Parole chiave
polyurethane elastomers, RIM, applications