<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The paper presents practical aspects of determining the amount of heat flow by measuring the distribution of surface temperature using the Temperature Sensitive Paint (TSP) method. The quantity measured directly with TSP is the intensity of the excited radiation, which is then converted to surface temperature. The article briefly presents three different methods for determining the heat transfer coefficient. Each of these methods is based on a separate set of assumptions and significantly influences the construction of the measuring station. The advantages of each of the presented methods are their individual properties, allowing to improve accuracy, reduce the cost of testing or the possibility of using them in tests of highly complex objects. For each method a mathematical model used to calculate the heat transfer coefficient is presented. For the steady state heat transfer test method that uses a heater of constant and known thermal power, examples of the results of our own research are presented, together with a comparison of the results with available data and a discussion of the accuracy of the results obtained.</p>
</abstract>

The paper presents practical aspects of determining the amount of heat flow by measuring the distribution of surface temperature using the Temperature Sensitive Paint (TSP) method. The quantity measured directly with TSP is the intensity of the excited radiation, which is then converted to surface temperature. The article briefly presents three different methods for determining the heat transfer coefficient. Each of these methods is based on a separate set of assumptions and significantly influences the construction of the measuring station. The advantages of each of the presented methods are their individual properties, allowing to improve accuracy, reduce the cost of testing or the possibility of using them in tests of highly complex objects. For each method a mathematical model used to calculate the heat transfer coefficient is presented. For the steady state heat transfer test method that uses a heater of constant and known thermal power, examples of the results of our own research are presented, together with a comparison of the results with available data and a discussion of the accuracy of the results obtained.

Heat Transfer Determined by the Temperature Sensitive Paint Method

Transactions on Aerospace Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Heat Transfer Determined by the Temperature Sensitive Paint Method"}

The paper presents practical aspects of determining the amount of heat flow by measuring the distribution of surface temperature using the Temperature...

Heat Transfer Determined by the Temperature Sensitive Paint Method

Pubblicato online: 06 set 2019

Pagine: 45 - 57

DOI: https://doi.org/10.2478/tar-2018-0029

Parole chiave
temperature sensitive paint, TSP, temperature measurement, heat transfer coefficient, HTC

© 2017 Copyright by Lukasiewicz Research Network – Institute of Aviation

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Heat Transfer Determined by the Temperature Sensitive Paint Method

Pubblicato online: 06 set 2019

Pagine: 45 - 57

DOI: https://doi.org/10.2478/tar-2018-0029

Parole chiavetemperature sensitive paint, TSP, temperature measurement, heat transfer coefficient, HTC

© 2017 Copyright by Lukasiewicz Research Network – Institute of Aviation

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
temperature sensitive paint, TSP, temperature measurement, heat transfer coefficient, HTC