[Wei-Wen Yu (2000) Cold-Formed Steel Design, Wiley, 2000. – 767 p.]Search in Google Scholar
[IRC Wall Bracing: A Guide (2018) for Builders, Designers and Plan Reviewers. ABTG Research Report No. 1601-01. Available at: https://www.appliedbuildingtech.com/system/files/abtgrr_1601-01_irc_2015_wall_bracing_guide.pdf.]Search in Google Scholar
[Kováč, M (2015)Elastic critical axial force for the torsional-flexural buckling of thin-walled metal members: an approximate method. Slovak Journal of Civil Engineering, Vol. 23, No. 1, pp. 23 – 32.10.1515/sjce-2015-0004]Search in Google Scholar
[Schafer, B. W.(2013) “Sheathing Braced Design of Wall Studs”. AISI-Specifications for the Design of Cold-Formed Steel Structural Members. Available at: https://scholarsmine.mst.edu/cgi/viewcontent.cgi?article=1114&context=ccfss-aisi-spec.]Search in Google Scholar
[Рекомендации (1980) по учету жесткости диафрагм из стального профилированного настила в покрытиях одноэтажных производственных зданий при горизонтальных нагрузках (Recommendations for accounting for the stiffness of diaphragms from steel profiledflooring in the roofs of one-story industrial buildings under the action of a horizontal load). Мoscow.]Search in Google Scholar
[Residential structural design guide: 2000 Edition (2000). Washington, D.C.]Search in Google Scholar
[Iuorio O. – Schafer B. W. (2008). Compilation of k values, Johns Hopkins University, USA Available at: http://www.ce.jhu.edu/bschafer/sheathedwalls.]Search in Google Scholar
[Zinkevych O. G. (2013). Rational design of low-rise buildings and superstructures’ framing from lightweight steel thin-wall constructions, Thesis for the PhD in technical sciences, specialty 05.23.01 - building structures, buildings and constructions, Prydniprovs’ka State Academy of Civil Engineering and Architecture, Dnipropetrovs’k, Ukraine.]Search in Google Scholar
