<abstract xmlns="http://www.w3.org/1999/xhtml">This paper focuses on a study of different methodologies for surveying two-dimensional scale models of rubble mound breakwaters.Tests were conducted in one of the LNEC’s irregular wave flumes and involved the use of four different methodologies using photogrammetric and 3D scanning techniques.This paper describes the materials and methods used during the experiments, as well as the results obtained.The data analysis contains the profiles and comparison of the meshes used in each of the techniques, in order to evaluate their application in scale model tests of rubble mound breakwaters. Also, the specific experimental conditions needed for using each of these techniques were investigated.</abstract>

This paper focuses on a study of different methodologies for surveying two-dimensional scale models of rubble mound breakwaters.Tests were conducted in one of the LNEC’s irregular wave flumes and involved the use of four different methodologies using photogrammetric and 3D scanning techniques.This paper describes the materials and methods used during the experiments, as well as the results obtained.The data analysis contains the profiles and comparison of the meshes used in each of the techniques, in order to evaluate their application in scale model tests of rubble mound breakwaters. Also, the specific experimental conditions needed for using each of these techniques were investigated.

Using 3D Modelling Techniques for Surveys in Two Dimensional Scale Model Tests of Breakwaters

Laboratório Nacional de Engenharia Civil

Slovak Journal of Civil Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

This paper focuses on a study of different methodologies for surveying two-dimensional scale models of rubble mound breakwaters.Tests were conducted in one of...

Using 3D Modelling Techniques for Surveys in Two Dimensional Scale Model Tests of Breakwaters

Pubblicato online: 30 giu 2018

Pagine: 15 - 23

DOI: https://doi.org/10.2478/sjce-2018-0009

Parole chiave
Maritime structures, Scale model tests, Damage evolution, 3D surface models, Photogrammetry

© 2018 Rute Lemos et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Using 3D Modelling Techniques for Surveys in Two Dimensional Scale Model Tests of Breakwaters

Pubblicato online: 30 giu 2018

Pagine: 15 - 23

DOI: https://doi.org/10.2478/sjce-2018-0009

Parole chiaveMaritime structures, Scale model tests, Damage evolution, 3D surface models, Photogrammetry

© 2018 Rute Lemos et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Parole chiave
Maritime structures, Scale model tests, Damage evolution, 3D surface models, Photogrammetry