Pile–Soil Interaction during Static Load Test

[1] Azzouz, A. S., M. M. Baligh, and A. J. Whittle. 1990. “Shaft resistance of piles in clay.” J. Geotech. Eng. 116(2): 205–221. AzzouzA. S. BalighM. M. WhittleA. J. 1990 “Shaft resistance of piles in clay.” J. Geotech. Eng. 116 2 205 221 Search in Google Scholar

[2] Briaud, J. and L. Tucker. 1984. “Piles in sand: A method including residual stress.” J. Geotech. Eng. 110(11): 1666–1680. BriaudJ. TuckerL. 1984 “Piles in sand: A method including residual stress.” J. Geotech. Eng. 110 11 1666 1680 Search in Google Scholar

[3] Briaud, J. L. 2013. “Geotechnical engineering: Unsaturated and saturated soils.” Wiley, New Jersey. BriaudJ. L 2013 “Geotechnical engineering: Unsaturated and saturated soils.” Wiley New Jersey Search in Google Scholar

[4] Brinch Hansen, J. 1970. “A revised and extended formula for bearing capacity.” Danish Geotechnical Institute, Bull, Copenhagen. Brinch HansenJ 1970 “A revised and extended formula for bearing capacity.” Danish Geotechnical Institute Bull, Copenhagen Search in Google Scholar

[5] Chin, F. K. 1970. “Estimation of ultimate load of piles not carried to failure.” Proceedings 2^nd Southeast Asia Conference on Soil Engineering: 81–92. ChinF. K 1970 “Estimation of ultimate load of piles not carried to failure.” Proceedings 2^nd Southeast Asia Conference on Soil Engineering 81 92 Search in Google Scholar

[6] Di Donna, A., A. Ferrari, and L. Laloui. 2016. “Experimental investigations of the soil–concrete interface: Physical mechanisms, cyclic mobilization, and behaviour at different temperatures.” Can. Geotech. J. 53: 1–14. http://dx.doi.org/10.1139/cgj-2015-0294 Di DonnaA. FerrariA. LalouiL. 2016 “Experimental investigations of the soil–concrete interface: Physical mechanisms, cyclic mobilization, and behaviour at different temperatures.” Can. Geotech. J. 53 1 14 http://dx.doi.org/10.1139/cgj-2015-0294 Search in Google Scholar

[7] Fioravante, V. 2002. “On the shaft friction modelling of non-displacement piles in sand.” Soils Found. 42(2): 23–33. FioravanteV 2002 “On the shaft friction modelling of non-displacement piles in sand.” Soils Found. 42 2 23 33 Search in Google Scholar

[8] Fleming, W. G. K. 1992. “A new method for single pile settlement prediction and analysis.” Géotechnique 42(3): 411–425. FlemingW. G. K 1992 “A new method for single pile settlement prediction and analysis.” Géotechnique 42 3 411 425 Search in Google Scholar

[9] Galvis-Castro, A. C., D. Tovar-Valencia Ruben, R. Salgado, and M. Prezzi. 2019. “Compressive and tensile shaft resistance of nondisplacement piles in sand.” J. Geotech. Geoenviron. Eng. 145(9): 04019041. Galvis-CastroA. C. Tovar-Valencia RubenD. SalgadoR. PrezziM. 2019 “Compressive and tensile shaft resistance of nondisplacement piles in sand.” J. Geotech. Geoenviron. Eng. 145 9 04019041 Search in Google Scholar

[10] Glazer, Z. 1977. “Mechanika gruntów” in Polish. Wydawnictwa Geologiczne, Warszawa. GlazerZ 1977 “Mechanika gruntów” in Polish Wydawnictwa Geologiczne Warszawa Search in Google Scholar

[11] Gumny, K., PhD. 2021. “Soil-structure interaction in single pile-raft foundation.” West Pomeranian University of Technology in Szczecin, Szczecin. GumnyK. PhD. 2021 “Soil-structure interaction in single pile-raft foundation.” West Pomeranian University of Technology in Szczecin Szczecin Search in Google Scholar

[12] Gwizdała, K. 1996. “Analiza osiadań pali przy wykorzystaniu funkcji transformacyjnych” in Polish. Zeszyty Naukowe Politechniki Gdańskiej, Nr 532, Budownictwo Wodne Nr 41. GwizdałaK 1996 “Analiza osiadań pali przy wykorzystaniu funkcji transformacyjnych” in Polish Zeszyty Naukowe Politechniki Gdańskiej, Nr 532, Budownictwo Wodne Nr 41. Search in Google Scholar

[13] Gwizdała, K., and M. Stęczniewski. 2015. “Wykorzystanie metody funkcji transformacyjnych do analizy nośności i osiadań pali CFA” in Polish. Inżynieria Morska i Geotechnika 2015(3): 433–437. GwizdałaK. StęczniewskiM. 2015 “Wykorzystanie metody funkcji transformacyjnych do analizy nośności i osiadań pali CFA” in Polish Inżynieria Morska i Geotechnika 2015 3 433 437 Search in Google Scholar

[14] Ismael, N. F. 1989. “Skin friction of driven piles in calcareous sands.” J. Geotech. Eng. 115(1): 135–139. IsmaelN. F 1989 “Skin friction of driven piles in calcareous sands.” J. Geotech. Eng. 115 1 135 139 Search in Google Scholar

[15] Jardine, R. J., R. Standing Jr., and F. Chow. C. 2006. “Some observations of the effects of time on the capacity of piles driven in sand.” Géotechnique 56(4): 227–244. JardineR. J. StandingR.Jr. Chow. C.F. 2006 “Some observations of the effects of time on the capacity of piles driven in sand.” Géotechnique 56 4 227 244 Search in Google Scholar

[16] Lee, C. Y., and H. G. Poulos. 1991. “Tests on model instrumented grouted piles in offshore calcareous soil.” J. Geotech. Eng. 117(11): 1738–1753. LeeC. Y. PoulosH. G. 1991 “Tests on model instrumented grouted piles in offshore calcareous soil.” J. Geotech. Eng. 117 11 1738 1753 Search in Google Scholar

[17] Lehane, B. M., R. J. Jardine, A. J. Bond, and R. Frank. 1993. “Mechanisms of shaft friction in sand from instrumented pile tests,” J. Geotech. Eng. 119(1): 19–35 LehaneB. M. JardineR. J. BondA. J. FrankR. 1993 “Mechanisms of shaft friction in sand from instrumented pile tests,” J. Geotech. Eng. 119 1 19 35 Search in Google Scholar

[18] Le Kouby, A., J. C. Dupla, J. Canou, and R. Francis. 2013. “Pile response in sand: Experimental development and study.” Int. J. Physical Model. Geotech. 13(4): 122–137. Le KoubyA. DuplaJ. C. CanouJ. FrancisR. 2013 “Pile response in sand: Experimental development and study.” Int. J. Physical Model. Geotech. 13 4 122 137 Search in Google Scholar

[19] Mazurkiewicz, B. 1966; “Sprawdzanie dopuszczalnej nośności pali w terenie. Cz. 2” in Polish. Inżynieria i budownictwo nr 6: 214–218. MazurkiewiczB. 1966 “Sprawdzanie dopuszczalnej nośności pali w terenie. Cz. 2” in Polish Inżynieria i budownictwo 6 214 218 Search in Google Scholar

[20] Meyer, Z., and M. Kowalów. 2010. “Model krzywej aproksymującej wyniki testów statycznych pali” in Polish. Inżynieria Morska i Geotechnika 3: 438–441. MeyerZ. KowalówM. 2010 “Model krzywej aproksymującej wyniki testów statycznych pali” in Polish Inżynieria Morska i Geotechnika 3 438 441 Search in Google Scholar

[21] Meyer, Z., and P. Siemaszko. 2019. “Static load test analysis based on soil field investigations.” Bull. Pol. Acad. Sci.: Tech Sci. 67(2): 329–337. MeyerZ. SiemaszkoP. 2019 “Static load test analysis based on soil field investigations.” Bull. Pol. Acad. Sci.: Tech Sci. 67 2 329 337 Search in Google Scholar

[22] Meyer, Z., and P. Siemaszko. 2021. “Analysis of the pile skin resistance formation.” Studia Geotechnica et Mechanica 43(4): 380–388. MeyerZ. SiemaszkoP. 2021 “Analysis of the pile skin resistance formation.” Studia Geotechnica et Mechanica 43 4 380 388 Search in Google Scholar

[23] Meyer, Z., and K. Stachecki. 2018. “Static load test curve (Q–s) conversion in to pile of different size.” Ann. Warsaw Univ. Life Sci. – SGGW 50: 171–182. MeyerZ. StacheckiK. 2018 “Static load test curve (Q–s) conversion in to pile of different size.” Ann. Warsaw Univ. Life Sci. – SGGW 50 171 182 Search in Google Scholar

[24] Meyer, Z., and K. Żarkiewicz. 2018. “Skin and toe resistance mobilisation of pile during laboratory static load test.” Studia Geotechnica et Mechanica 40: 1–5. MeyerZ. ŻarkiewiczK. 2018 “Skin and toe resistance mobilisation of pile during laboratory static load test.” Studia Geotechnica et Mechanica 40 1 5 Search in Google Scholar

[25] Miller, G. A., and A. J. Lutenegger. 1997. “Influence of pile plugging on skin friction in overconsolidated clay.” J. Geotech. Geoenviron. Eng. 123(6): 525–533. MillerG. A. LuteneggerA. J. 1997 “Influence of pile plugging on skin friction in overconsolidated clay.” J. Geotech. Geoenviron. Eng. 123 6 525 533 Search in Google Scholar

[26] Mochtar, I. B., and T. B. Edil. 1988. “Shaft resistance of model pile in clay.” J. Geotech. Eng. 114(11): 1227–1244. MochtarI. B. EdilT. B. 1988 “Shaft resistance of model pile in clay.” J. Geotech. Eng. 114 11 1227 1244 Search in Google Scholar

[27] N-Geo. 2018. “Soil geotechnical parameters based on CPTu investigation.” Part of the “Nowa Przystań” project documentation. N-Geo 2018 “Soil geotechnical parameters based on CPTu investigation.” Part of the “Nowa Przystań” project documentation Search in Google Scholar

[28] Siemaszko, P., PhD. 2022. “Analysis of the pile shortening effect on skin resistance formation.” West Pomeranian Institute of Technology in Szczecin, Szczecin. SiemaszkoP. PhD. 2022 “Analysis of the pile shortening effect on skin resistance formation.” West Pomeranian Institute of Technology in Szczecin Szczecin Search in Google Scholar

[29] Tehrani, F. S., F. Han, R. Salgado, M. Prezzi, R. D. Tovar, and A. G. Gastro. 2016. “Effect of surface roughness on the shaft resistance of non-displacement piles embedded in sand.” Géotechnique 66(5): 386–400. TehraniF. S. HanF. SalgadoR. PrezziM. TovarR. D. GastroA. G. 2016 “Effect of surface roughness on the shaft resistance of non-displacement piles embedded in sand.” Géotechnique 66 5 386 400 Search in Google Scholar

[30] Terzaghi, K., and R. B. Peck. 1967. “Soil mechanics in engineering practice.” Wiley and Sons, New York. TerzaghiK. PeckR. B. 1967 “Soil mechanics in engineering practice.” Wiley and Sons New York Search in Google Scholar

[31] Thilakasiri, H. S. 2007. “Qualitative interpretation of load-settlement curves of bored piles.” Eng.: J. Inst. Eng. (Sri Lanka) 40(4): 61–68. ThilakasiriH. S 2007 “Qualitative interpretation of load-settlement curves of bored piles.” Eng.: J. Inst. Eng. (Sri Lanka) 40 4 61 68 Search in Google Scholar

[32] Tomlinson, M., and J. Woodward. 2008. “Pile design and construction practice.” Taylor and Francis London, New York. TomlinsonM. WoodwardJ. 2008 “Pile design and construction practice.” Taylor and Francis London New York Search in Google Scholar

[33] Zhang, C., G. D. Nguyen, and I. Einav. 2013. “The end-bearing capacity of piles penetrating into crushable soils.” Géotechnique 63(5): 341–354. http://dx.doi.org/10.1680/geot.11.P.117 ZhangC. NguyenG. D. EinavI. 2013 “The end-bearing capacity of piles penetrating into crushable soils.” Géotechnique 63 5 341 354 http://dx.doi.org/10.1680/geot.11.P.117 Search in Google Scholar

[34] Żarkiewicz, K., PhD. 2017. “Analysis of pile shaft bearing capacity formation in non-cohesive soils based on laboratory model investigation” in Polish. West Pomeranian University of Technology in Szczecin, Szczecin ŻarkiewiczK. PhD. 2017 “Analysis of pile shaft bearing capacity formation in non-cohesive soils based on laboratory model investigation” in Polish West Pomeranian University of Technology in Szczecin Szczecin Search in Google Scholar

[35] Project documentation by FBA for “Nowa Przystań” address Leona Heyki 3 Szczecin. Project documentation by FBA for “Nowa Przystań” address Leona Heyki 3 Szczecin Search in Google Scholar

[36] Scientific description of the static load test results with extensometers for “Nowa Przystań” address Leona Heyki 3 Szczecin. Scientific description of the static load test results with extensometers for “Nowa Przystań” address Leona Heyki 3 Szczecin Search in Google Scholar