<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper presents a quantitative characterisation of the fracture openings obtained in triaxial shear tests on several cement mortar samples. The comparison was carried out on three samples with various apertures using different methods of semi-destructive and non-destructive characterisation: optical microscopy, scanning electron microscopy, X-ray computed tomography, digital volume correlation and the <sup>14</sup>C-polymethylmethacrylate method. The fracture aperture distribution results are in good agreement between the different methods. Although the opening results obtained are comparable, the most advantageous method was considered to be XRCT profile analysis based on the size of the target area studied and the specific characteristics of each technique.</p>
</abstract>

This paper presents a quantitative characterisation of the fracture openings obtained in triaxial shear tests on several cement mortar samples. The comparison was carried out on three samples with various apertures using different methods of semi-destructive and non-destructive characterisation: optical microscopy, scanning electron microscopy, X-ray computed tomography, digital volume correlation and the 14C-polymethylmethacrylate method. The fracture aperture distribution results are in good agreement between the different methods. Although the opening results obtained are comparable, the most advantageous method was considered to be XRCT profile analysis based on the size of the target area studied and the specific characteristics of each technique.

Comparing fracture openings in mortar using different imaging techniques

Studia Geotechnica et Mechanica

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Comparing fracture openings in mortar using different imaging techniques"}

This paper presents a quantitative characterisation of the fracture openings obtained in triaxial shear tests on several cement mortar samples. The comparison...

Comparing fracture openings in mortar using different imaging techniques

Article Category: Original Study

Pubblicato online: 30 mar 2024

Pagine: 77 - 90

Ricevuto: 15 dic 2023

Accettato: 23 feb 2024

DOI: https://doi.org/10.2478/sgem-2024-0004

Parole chiave
mortar, fracture apertures, characterisation method, process duration, disadvantages

© 2024 Jonathan Marliot et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Comparing fracture openings in mortar using different imaging techniques

Article Category: Original Study

Pubblicato online: 30 mar 2024

Pagine: 77 - 90

Ricevuto: 15 dic 2023

Accettato: 23 feb 2024

DOI: https://doi.org/10.2478/sgem-2024-0004

Parole chiavemortar, fracture apertures, characterisation method, process duration, disadvantages

© 2024 Jonathan Marliot et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Parole chiave
mortar, fracture apertures, characterisation method, process duration, disadvantages