Influence of Waste Toothbrush Fiber on Strength and Freezing–Thawing Behavior in High Plasticity Clay

[1]Tulek, M. (2007). A study of the use of chemical waste gypsums in soil stabilization. Balıkesir Üniversitesi Fen Bilimleri Enstitüsü (Doctoral dissertation, Yüksek lisans Tezi).[in Turkish].TulekM.2007A study of the use of chemical waste gypsums in soil stabilization. Balıkesir Üniversitesi Fen Bilimleri Enstitüsü(Doctoral dissertation, Yüksek lisans Tezi).[in Turkish].Search in Google Scholar

[2]Coruh E., Hinisoglu, S., Kocakerim, M., Arasan, S., Oltulu, M. (2013). Investigation of the usage of borogypsum in the subbase course as a stabilization material. EÜFBED – The Graduate School of Natural and Applied Sciences Journal, 6(2), 221–231.CoruhE.HinisogluS.KocakerimM.ArasanS.OltuluM.2013Investigation of the usage of borogypsum in the subbase course as a stabilization materialEÜFBED – The Graduate School of Natural and Applied Sciences Journal62221231Search in Google Scholar

[3]Kütük-Sert, T., & Kütük, S. (2013). Physical and marshall properties of borogypsum used as filler aggregate in asphalt concrete. Journal of Materials in Civil Engineering, 25(2), 266–273.Kütük-SertT.KütükS.2013Physical and marshall properties of borogypsum used as filler aggregate in asphalt concreteJournal of Materials in Civil Engineering25226627310.1061/(ASCE)MT.1943-5533.0000580Search in Google Scholar

[4]Gregory, C. A., Saylak, D., & Ledbetter, W. B. (1984). The use of by-product phosphogypsum for road bases and subbases. Transportation Research Record, 998, 47–52.GregoryC. A.SaylakD.LedbetterW. B.1984The use of by-product phosphogypsum for road bases and subbasesTransportation Research Record9984752Search in Google Scholar

[5]Degirmenci, N., Okucu, A., & Turabi, A. (2007). Application of phosphogypsum in soil stabilization. Building and environment, 42(9), 3393–3398.DegirmenciN.OkucuA.TurabiA.2007Application of phosphogypsum in soil stabilizationBuilding and environment4293393339810.1016/j.buildenv.2006.08.010Search in Google Scholar

[6]Shen, W., Zhou, M., & Zhao, Q. (2007). Study on lime–fly ash–phosphogypsum binder. Construction and Building Materials, 21(7), 1480–1485.ShenW.ZhouM.ZhaoQ.2007Study on lime–fly ash–phosphogypsum binderConstruction and Building Materials2171480148510.1016/j.conbuildmat.2006.07.010Search in Google Scholar

[7]Yilmaz, I., & Civelekoglu, B. (2009). Gypsum: an additive for stabilization of swelling clay soils. Applied clay science, 44(1–2), 166–172.YilmazI.CivelekogluB.2009Gypsum: an additive for stabilization of swelling clay soilsApplied clay science441–216617210.1016/j.clay.2009.01.020Search in Google Scholar

[8]Shen, W., Zhou, M., Ma, W., Hu, J., & Cai, Z. (2009). Investigation on the application of steel slag–fly ash–phosphogypsum solidified material as road base material. Journal of hazardous materials, 164(1), 99–104.ShenW.ZhouM.MaW.HuJ.CaiZ.2009Investigation on the application of steel slag–fly ash–phosphogypsum solidified material as road base materialJournal of hazardous materials16419910410.1016/j.jhazmat.2008.07.125Search in Google Scholar

[9]Kalkan, E., & Akbulut, S. (2004). The positive effects of silica fume on the permeability, swelling pressure and compressive strength of natural clay liners. Engineering Geology, 73(1–2), 145–156.KalkanE.AkbulutS.2004The positive effects of silica fume on the permeability, swelling pressure and compressive strength of natural clay linersEngineering Geology731–214515610.1016/j.enggeo.2004.01.001Search in Google Scholar

[10]Kalantari, B., Prasad, A., & Huat, B. B. (2011). Stabilising peat soil with cement and silica fume. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 164(1), 33–39.KalantariB.PrasadA.HuatB. B.2011Stabilising peat soil with cement and silica fumeProceedings of the Institution of Civil Engineers-Geotechnical Engineering1641333910.1680/geng.900044Search in Google Scholar

[11]Sattar, M. A. A., Daud, K. A., & Al-Azzawi, A. A. (2012). Effect of silica fume addition on the behavior of siltyclayey soils. Journal of Engineering and Sustainable Development, 16(1), 92–105.SattarM. A. A.DaudK. A.Al-AzzawiA. A.2012Effect of silica fume addition on the behavior of siltyclayey soilsJournal of Engineering and Sustainable Development16192105Search in Google Scholar

[12]Negi, C., Yadav, R.K. and Singhai, A.K.,^a (2013). Effect of silica fume on engineering properties of black cotton soil. Inter. J. of Computational Eng. Research, 3(7), 1.NegiC.YadavR.K.SinghaiA.K.2013aEffect of silica fume on engineering properties of black cotton soilInter. J. of Computational Eng. Research371Search in Google Scholar

[13]Negi, C., Yadav, R.K., and Singhai, A.K.,^b (2013). Effect of silica fume on index properties of black cotton soil. Inter. J. of Scientific & Eng. Research, 4(8).NegiC.YadavR.K.SinghaiA.K.2013bEffect of silica fume on index properties of black cotton soilInter. J. of Scientific & Eng. Research48Search in Google Scholar

[14]Gupta, C., & Sharma, R. K. (2014). Influence of micro silica fume on sub grade characteristics of expansive soil. International Journal of Civil Engineering Research, 5(1), 77–82.GuptaC.SharmaR. K.2014Influence of micro silica fume on sub grade characteristics of expansive soilInternational Journal of Civil Engineering Research517782Search in Google Scholar

[15]Cokca, E. (1999). Effect of fly ash on swell pressure of an expansive soil. Electronic Journal of Geotechnical Engineering, 4, 14.CokcaE.1999Effect of fly ash on swell pressure of an expansive soilElectronic Journal of Geotechnical Engineering414Search in Google Scholar

[16]Consoli, N. C., Prietto, P. D. M., Carraro, J. A. H., & Heineck, K. S. (2001). Behavior of compacted soil-fly ash-carbide lime mixtures. Journal of Geotechnical and Geoenvironmental Engineering, 127(9), 774–782.ConsoliN. C.PriettoP. D. M.CarraroJ. A. H.HeineckK. S.2001Behavior of compacted soil-fly ash-carbide lime mixturesJournal of Geotechnical and Geoenvironmental Engineering127977478210.1061/(ASCE)1090-0241(2001)127:9(774)Search in Google Scholar

[17]Phani Kumar, B. R., & Sharma, R. S. (2004). Effect of fly ash on engineering properties of expansive soils. Journal of Geotechnical and Geoenvironmental Engineering, 130(7), 764–767.Phani KumarB. R.SharmaR. S.2004Effect of fly ash on engineering properties of expansive soilsJournal of Geotechnical and Geoenvironmental Engineering130776476710.1061/(ASCE)1090-0241(2004)130:7(764)Search in Google Scholar

[18]Nalbantoğlu, Z. (2004). Effectiveness of class C fly ash as an expansive soil stabilizer. Construction and Building Materials, 18(6), 377–381.NalbantoğluZ.2004Effectiveness of class C fly ash as an expansive soil stabilizerConstruction and Building Materials18637738110.1016/j.conbuildmat.2004.03.011Search in Google Scholar

[19]Prabakar, J., Dendorkar, N., & Morchhale, R. K. (2004). Influence of fly ash on strength behavior of typical soils. Construction and Building Materials, 18(4), 263–267.PrabakarJ.DendorkarN.MorchhaleR. K.2004Influence of fly ash on strength behavior of typical soilsConstruction and Building Materials18426326710.1016/j.conbuildmat.2003.11.003Search in Google Scholar

[20]Kolias, S., Kasselouri-Rigopoulou, V., & Karahalios, A. (2005). Stabilisation of clayey soils with high calcium fly ash and cement. Cement and Concrete Composites, 27(2), 301–313.KoliasS.Kasselouri-RigopoulouV.KarahaliosA.2005Stabilisation of clayey soils with high calcium fly ash and cementCement and Concrete Composites27230131310.1016/j.cemconcomp.2004.02.019Search in Google Scholar

[21]Edil, T. B., Acosta, H. A., & Benson, C. H. (2006). Stabilizing soft fine-grained soils with fly ash. Journal of materials in civil engineering, 18(2), 283–294.EdilT. B.AcostaH. A.BensonC. H.2006Stabilizing soft fine-grained soils with fly ashJournal of materials in civil engineering18228329410.1061/(ASCE)0899-1561(2006)18:2(283)Search in Google Scholar

[22]Chauhan, M. S., Mittal, S., & Mohanty, B. (2008). Performance evaluation of silty sand subgrade reinforced with fly ash and fibre. Geotextiles and geomembranes, 26(5), 429–435.ChauhanM. S.MittalS.MohantyB.2008Performance evaluation of silty sand subgrade reinforced with fly ash and fibreGeotextiles and geomembranes26542943510.1016/j.geotexmem.2008.02.001Search in Google Scholar

[23]Brooks, R. M. (2009). Soil stabilization with fly ash and rice husk ash. International Journal of Research and Reviews in Applied Sciences, 1(3), 209–217.BrooksR. M.2009Soil stabilization with fly ash and rice husk ashInternational Journal of Research and Reviews in Applied Sciences13209217Search in Google Scholar

[24]Cristelo, N., Glendinning, S., Miranda, T., Oliveira, D., & Silva, R. (2012). Soil stabilisation using alkaline activation of fly ash for self compacting rammed earth construction. Construction and building materials, 36, 727–735.CristeloN.GlendinningS.MirandaT.OliveiraD.SilvaR.2012Soil stabilisation using alkaline activation of fly ash for self compacting rammed earth constructionConstruction and building materials3672773510.1016/j.conbuildmat.2012.06.037Search in Google Scholar

[25]Akbulut, S., Arasan, S., & Kalkan, E. (2007). Modification of clayey soils using scrap tire rubber and synthetic fibers. Applied Clay Science, 38(1–2), 23–32.AkbulutS.ArasanS.KalkanE.2007Modification of clayey soils using scrap tire rubber and synthetic fibersApplied Clay Science381–2233210.1016/j.clay.2007.02.001Search in Google Scholar

[26]Kalkan, E. (2013). Preparation of scrap tire rubber fiber–silica fume mixtures for modification of clayey soils. Applied Clay Science, 80, 117–125.KalkanE.2013Preparation of scrap tire rubber fiber–silica fume mixtures for modification of clayey soilsApplied Clay Science8011712510.1016/j.clay.2013.06.014Search in Google Scholar

[27]Fragaszy, R. J., & Lawton, E. (1984). Bearing capacity of reinforced sand subgrades. Journal of Geotechnical Engineering, 110(10), 1500–1507.FragaszyR. J.LawtonE.1984Bearing capacity of reinforced sand subgradesJournal of Geotechnical Engineering110101500150710.1061/(ASCE)0733-9410(1984)110:10(1500)Search in Google Scholar

[28]Huang, C. C., & Tatsuoka, F. (1990). Bearing capacity of reinforced horizontal sandy ground. Geotextiles and Geomembranes, 9(1), 51–82.HuangC. C.TatsuokaF.1990Bearing capacity of reinforced horizontal sandy groundGeotextiles and Geomembranes91518210.1016/0266-1144(90)90005-WSearch in Google Scholar

[29]Akinmusuru, J. O., & Akinbolade, J. A. (1981). Stability of loaded footings on reinforced soil. Journal of Geotechnical and Geoenvironmental Engineering, 107(ASCE 16320 Proceeding).AkinmusuruJ. O.AkinboladeJ. A.1981Stability of loaded footings on reinforced soilJournal of Geotechnical and Geoenvironmental Engineering107(ASCE 16320 Proceeding)10.1061/AJGEB6.0001153Search in Google Scholar

[30]Yetimoglu, T., Inanir, M., & Inanir, O. E. (2005). A study on bearing capacity of randomly distributed fiber-reinforced sand fills overlying soft clay. Geotextiles and Geomembranes, 23(2), 174–183.YetimogluT.InanirM.InanirO. E.2005A study on bearing capacity of randomly distributed fiber-reinforced sand fills overlying soft clayGeotextiles and Geomembranes23217418310.1016/j.geotexmem.2004.09.004Search in Google Scholar

[31]Guido, V.A., Chang, D.K., Sweeny, M.A. (1986). Comparison of geogrid and geotextile reinforced slabs. Canadian Geotech. J. 20, 435–440.GuidoV.A.ChangD.K.SweenyM.A.1986Comparison of geogrid and geotextile reinforced slabsCanadian Geotech. J.2043544010.1139/t86-073Search in Google Scholar

[32]Ghosh, A., Ghosh, A., & Bera, A. K. (2005). Bearing capacity of square footing on pond ash reinforced with jutegeotextile. Geotextiles and Geomembranes, 23(2), 144–173.GhoshA.GhoshA.BeraA. K.2005Bearing capacity of square footing on pond ash reinforced with jutegeotextileGeotextiles and Geomembranes23214417310.1016/j.geotexmem.2004.07.002Search in Google Scholar

[33]Omar, M.T., Das, B.M., Yen, S.C., Puri, V.K., Cook, E.E., ^a (1993). Ultimate bearing capacity of rectangular foundations on geogrid reinforced sand. Geotechnical Testing J, ASTM 16 (2), 246–252.OmarM.T.DasB.M.YenS.C.PuriV.K.CookE.E.1993aUltimate bearing capacity of rectangular foundations on geogrid reinforced sandGeotechnical Testing J, ASTM16224625210.1520/GTJ10041JSearch in Google Scholar

[34]Omar, M.T., Das, B.M., Puri, V.K., Yen, S.C., ^b, (1993). Ultimate bearing capacity of shallow foundations on sand with geogrid reinforcement. Canadian Geotech. J. 30, 545–549.OmarM.T.DasB.M.PuriV.K.YenS.C.1993bUltimate bearing capacity of shallow foundations on sand with geogrid reinforcementCanadian Geotech. J.3054554910.1139/t93-046Search in Google Scholar

[35]Yetimoglu, T., Wu, J. T., & Saglamer, A. (1994). Bearing capacity of rectangular footings on geogrid-reinforced sand. Journal of Geotechnical Engineering, 120(12), 2083–2099.YetimogluT.WuJ. T.SaglamerA.1994Bearing capacity of rectangular footings on geogrid-reinforced sandJournal of Geotechnical Engineering120122083209910.1061/(ASCE)0733-9410(1994)120:12(2083)Search in Google Scholar

[36]Adams, M. T., & Collin, J. G. (1997). Large model spread footing load tests on geosynthetic reinforced soil foundations. Journal of Geotechnical and Geoenvironmental Engineering, 123(1), 66–72.AdamsM. T.CollinJ. G.1997Large model spread footing load tests on geosynthetic reinforced soil foundationsJournal of Geotechnical and Geoenvironmental Engineering1231667210.1061/(ASCE)1090-0241(1997)123:1(66)Search in Google Scholar

[37]Patra, C. R., Das, B. M., Bhoi, M., & Shin, E. C. (2006). Eccentrically loaded strip foundation on geogrid-reinforced sand. Geotextiles and Geomembranes, 24(4), 254–259.PatraC. R.DasB. M.BhoiM.ShinE. C.2006Eccentrically loaded strip foundation on geogrid-reinforced sandGeotextiles and Geomembranes24425425910.1016/j.geotexmem.2005.12.001Search in Google Scholar

[38]Davis, E. A., & Hudson, E. C. (2000). Development of new colors and style for recycled polypropylene toothbrushes. UMass Lowell, Chelsea Center for Recycling and Economic Development.DavisE. A.HudsonE. C.2000Development of new colors and style for recycled polypropylene toothbrushesUMass Lowell, Chelsea Center for Recycling and Economic DevelopmentSearch in Google Scholar

[39]ASTM, D. (2011). 2487 (2006) Standard practice for classification of soils for engineering purposes (Unified Soil Classification System). Book of Standards, 4(08).ASTM, D. 24872011(2006) Standard practice for classification of soils for engineering purposes (Unified Soil Classification System)Book of Standards408Search in Google Scholar

[40]ASTM, D. (2000). 698-00, Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft³ (600 kN-m/m³)), ASTM International. Annual Book of ASTM Standards, 4.ASTM, D. 698-002000Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft³ (600 kN-m/m³)), ASTM InternationalAnnual Book of ASTM Standards4Search in Google Scholar

[41]ASTM, D. 4318-00. 2000. Standard test method for liquid limit, plastic limit and plasticity index of soils. Annual Book of ASTM Standards, 4, 08.ASTM, D. 4318-002000Standard test method for liquid limit, plastic limit and plasticity index of soilsAnnual Book of ASTM Standards408Search in Google Scholar

[42]British Standard, B. S. 1377 part 2. 1990. Methods of Test for Soils for Civil Engineering Purposes General Requirements and Sample Preparation.British Standard, B. S. 1377 part 21990Methods of Test for Soils for Civil Engineering Purposes General Requirements and Sample PreparationSearch in Google Scholar

[43]ASTM, D. 2166 (2006). Standard test method for unconfined compressive strength of cohesive soil. ASTM standard D, 2166.ASTM, D. 21662006Standard test method for unconfined compressive strength of cohesive soilASTM standard D2166Search in Google Scholar

[44]Kværnø, S. H., & Øygarden, L. (2006). The influence of freeze–thaw cycles and soil moisture on aggregate stability of three soils in Norway. Catena, 67(3), 175–182.KværnøS. H.ØygardenL.2006The influence of freeze–thaw cycles and soil moisture on aggregate stability of three soils in NorwayCatena67317518210.1016/j.catena.2006.03.011Search in Google Scholar

[45]Qi, J., Ma, W., & Song, C. (2008). Influence of freeze–thaw on engineering properties of a silty soil. Cold regions science and technology, 53(3), 397–404.QiJ.MaW.SongC.2008Influence of freeze–thaw on engineering properties of a silty soilCold regions science and technology53339740410.1016/j.coldregions.2007.05.010Search in Google Scholar

[46]Gullu, H., & Hazirbaba, K. (2010). Unconfined compressive strength and post-freeze–thaw behavior of fine-grained soils treated with geofiber and synthetic fluid. Cold regions science and technology, 62(2–3), 142–150.GulluH.HazirbabaK.2010Unconfined compressive strength and post-freeze–thaw behavior of fine-grained soils treated with geofiber and synthetic fluidCold regions science and technology622–314215010.1016/j.coldregions.2010.04.001Search in Google Scholar

[47]Ghazavi, M., & Roustaie, M. (2010). The influence of freeze–thaw cycles on the unconfined compressive strength of fiber-reinforced clay. Cold regions science and technology, 61(2–3), 125–131.GhazaviM.RoustaieM.2010The influence of freeze–thaw cycles on the unconfined compressive strength of fiber-reinforced clayCold regions science and technology612–312513110.1016/j.coldregions.2009.12.005Search in Google Scholar

[48]Liu, J., Wang, T., & Tian, Y. (2010). Experimental study of the dynamic properties of cement-and lime-modified clay soils subjected to freeze–thaw cycles. Cold Regions Science and Technology, 61(1), 29–33.LiuJ.WangT.TianY.2010Experimental study of the dynamic properties of cement-and lime-modified clay soils subjected to freeze–thaw cyclesCold Regions Science and Technology611293310.1016/j.coldregions.2010.01.002Search in Google Scholar

[49]Hazirbaba, K., Zhang, Y., & Hulsey, J. L. (2011). Evaluation of temperature and freeze–thaw effects on excess pore pressure generation of fine-grained soils. Soil dynamics and earthquake engineering, 31(3), 372–384.HazirbabaK.ZhangY.HulseyJ. L.2011Evaluation of temperature and freeze–thaw effects on excess pore pressure generation of fine-grained soilsSoil dynamics and earthquake engineering31337238410.1016/j.soildyn.2010.09.006Search in Google Scholar

[50]Zaimoğlu, A. Ş., Hattatoğlu, F., Akbulut, R. K., & Yetimoğlu, T. (2012). Freeze-thaw behavior of fine grained soils subjected to surcharge loads. In 3rd International Conference on New Developments in Soil Mechanics and Geotechnical Engineering, 28–30.ZaimoğluA. Ş.HattatoğluF.AkbulutR. K.YetimoğluT.2012Freeze-thaw behavior of fine grained soils subjected to surcharge loadsIn3rd International Conference on New Developments in Soil Mechanics and Geotechnical Engineering2830Search in Google Scholar

[51]Yarbaşı, N., Kalkan, E., & Akbulut, S. (2007). Modification of the geotechnical properties, as influenced by freeze–thaw, of granular soils with waste additives. Cold regions science and technology, 48(1), 44–54.YarbaşıN.KalkanE.AkbulutS.2007Modification of the geotechnical properties, as influenced by freeze–thaw, of granular soils with waste additivesCold regions science and technology481445410.1016/j.coldregions.2006.09.009Search in Google Scholar

[52]Kamei, T., Ahmed, A., & Shibi, T. (2012). Effect of freeze–thaw cycles on durability and strength of very soft clay soil stabilised with recycled Bassanite. Cold Regions Science and Technology, 82, 124–129.KameiT.AhmedA.ShibiT.2012Effect of freeze–thaw cycles on durability and strength of very soft clay soil stabilised with recycled BassaniteCold Regions Science and Technology8212412910.1016/j.coldregions.2012.05.016Search in Google Scholar

[53]Czurda, K. A., & Hohmann, M. (1997). Freezing effect on shear strength of clayey soils. Applied clay science, 12(1–2), 165–187.CzurdaK. A.HohmannM.1997Freezing effect on shear strength of clayey soilsApplied clay science121–216518710.1016/S0169-1317(97)00005-7Search in Google Scholar

[54]Viklander, P., & Eigenbrod, D. (2000). Stone movements and permeability changes in till caused by freezing and thawing. Cold Regions Science and Technology, 31(2), 151–162.ViklanderP.EigenbrodD.2000Stone movements and permeability changes in till caused by freezing and thawingCold Regions Science and Technology31215116210.1016/S0165-232X(00)00009-4Search in Google Scholar

[55]Ahmed, A., & Ugai, K. (2011). Environmental effects on durability of soil stabilized with recycled gypsum. Cold regions science and technology, 66(2–3), 84–92.AhmedA.UgaiK.2011Environmental effects on durability of soil stabilized with recycled gypsumCold regions science and technology662–3849210.1016/j.coldregions.2010.12.004Search in Google Scholar

[56]Kamei, T., Ahmed, A., & Ugai, K. (2011). The performance of soft clay soil stabilized with recycled gypsum in wet environment. In Proceedings of the 14th Pan-American Conference on Soil Mechanics and Geotechnical Engineering.KameiT.AhmedA.UgaiK.2011The performance of soft clay soil stabilized with recycled gypsum in wet environmentInProceedings of the 14th Pan-American Conference on Soil Mechanics and Geotechnical EngineeringSearch in Google Scholar

[57]Yetimoglu, T., & Salbas, O. (2003). A study on shear strength of sands reinforced with randomly distributed discrete fibers. Geotextiles and Geomembranes, 21(2), 103–110.YetimogluT.SalbasO.2003A study on shear strength of sands reinforced with randomly distributed discrete fibersGeotextiles and Geomembranes21210311010.1016/S0266-1144(03)00003-7Search in Google Scholar

[58]Freilich, B. J., Li, C., & Zornberg, J. G. (2010). Effective shear strength of fiber-reinforced clays. In 9th International Conference on Geosynthetics, Brazil, 1997–2000.FreilichB. J.LiC.ZornbergJ. G.2010Effective shear strength of fiber-reinforced claysIn9th International Conference on GeosyntheticsBrazil1997–2000Search in Google Scholar

[59]Zaimoglu, A. S. (2010). Freezing–thawing behavior of fine-grained soils reinforced with polypropylene fibers. Cold regions science and technology, 60(1), 63–65.ZaimogluA. S.2010Freezing–thawing behavior of fine-grained soils reinforced with polypropylene fibersCold regions science and technology601636510.1016/j.coldregions.2009.07.001Search in Google Scholar

[60]Tunç A. (2002). Geotechnic and Its Applications on Road Engineering. Atlas Publisher, İstanbul, Turkey [in Turkish].TunçA.2002Geotechnic and Its Applications on Road EngineeringAtlas Publisherİstanbul, Turkey [in Turkish]Search in Google Scholar