Analysis of the Collapse Gradient of Deep Water Horizontal Wellbore and the Effects of Mud Chemical Activity and Variation in Water Depth

[1]Aadnoy, B. S., Ong, S., 2003. Introduction to special issue on Borehole Stability. J Petrol Sci Eng, 38[3–4], 79–82.AadnoyB. S.OngS.2003Introduction to special issue on Borehole StabilityJ Petrol Sci Eng383–4798210.1016/S0920-4105(03)00022-6Search in Google Scholar

[2]Adewale Dosunmu, 2013. Fundamentals of Petroleum Geomechanics and Wellbore Stability in Well Design and Construction, SPE Short Course held at SPE/NAICE Conference, Lagos, Nigeria.DosunmuAdewale2013Fundamentals of Petroleum Geomechanics and Wellbore Stability in Well Design and ConstructionSPE Short Course held at SPE/NAICE ConferenceLagos, NigeriaSearch in Google Scholar

[3]Al-Ajmi, A.M., 2006. Wellbore stability analysis based on a new true-triaxial failure criterion, TRITA-LWR Ph.D. Thesis 1026.Al-AjmiA.M.2006Wellbore stability analysis based on a new true-triaxial failure criterionTRITA-LWR Ph.D. Thesis 1026.Search in Google Scholar

[4]Bourgoyne, A.T., Millheim, K.K., Chenevert, M.E., Young, F.S., 1991. Applied Drilling Engineering, SPE Textbook Series, Vol.5, 246–259.BourgoyneA.T.MillheimK.K.ChenevertM.E.YoungF.S.1991Applied Drilling EngineeringSPE Textbook Series524625910.2118/9781555630010Search in Google Scholar

[5]Colmenare L.B., Zoback M.D., 2002, A statistical evaluation of intact rock failure criteria constrained by polyaxial data for five different rocks, IJRMMS, 39, p. 699.ColmenareL.B.ZobackM.D.2002A statistical evaluation of intact rock failure criteria constrained by polyaxial data for five different rocksIJRMMS3969910.1016/S1365-1609(02)00048-5Search in Google Scholar

[6]Chen, P., Tianshou, M., Hongqua, X., 2015. A Collapse Pressure Prediction Model for horizontal shale gas wells with multiple weak planes, Natural Gas Industry B. 2(1), 101–107.ChenP.TianshouM.HongquaX.2015A Collapse Pressure Prediction Model for horizontal shale gas wells with multiple weak planesNatural Gas Industry B2110110710.1016/j.ngib.2015.02.009Search in Google Scholar

[7]Choi, S-B., Mim, K-B., Kim, T., Jeon, S. 2015. Experimental investigation on anisotropic characteristics of Boreyong shale in Korea. In: 13th ISRM International Congress of Rock Mechanics, 2015. International Society for Rock Mechanics.ChoiS-B.MimK-B.KimT.JeonS.2015Experimental investigation on anisotropic characteristics of Boreyong shale in KoreaIn:13th ISRM International Congress of Rock Mechanics2015International Society for Rock MechanicsSearch in Google Scholar

[8]CSIRO, 2018. “Historical Sea level changes: Last decades”, www.cmar.csiro.ac. Retrieved 2018-08-26.CSIRO2018“Historical Sea level changes: Last decades”www.cmar.csiro.ac. Retrieved 2018-08-26.Search in Google Scholar

[9]Ewy, R.T., Stankovich, R.J., 2002. “Shale-fluid interaction measured under simulated downhole condition”. SPE/ISRM 78160. In: SPE/ISRM Rock Mech. Conference, Irving, Texas, 20–23 Oct.EwyR.T.StankovichR.J.2002“Shale-fluid interaction measured under simulated downhole condition”SPE/ISRM 78160. In:SPE/ISRM Rock Mech. ConferenceIrving, Texas20–23 Oct.10.2118/78160-MSSearch in Google Scholar

[10]Fjær, E., Holt, R. M., Horsrud, P., et al., 2008. Petroleum Related Rock Mechanics, 2^nd Edition, Elsevier, Amsterdam, pp: 146–149, 323–334.FjærE.HoltR. M.HorsrudP.2008Petroleum Related Rock Mechanics2nd EditionElsevierAmsterdam146149323334Search in Google Scholar

[11]Gholami, R., Moradzadeh, A., Rasouli, V., Hanachi, J., 2013. Practical application of Failure criteria in determining safe mud weight windows in drilling operations, J Rock Mech Geotech Eng. 55. 1–13. http://dx.doi.org/10.1016/jrmge.2013.11.002GholamiR.MoradzadehA.RasouliV.HanachiJ.2013Practical application of Failure criteria in determining safe mud weight windows in drilling operationsJ Rock Mech Geotech Eng55113http://dx.doi.org/10.1016/jrmge.2013.11.00210.1016/j.jrmge.2013.11.002Search in Google Scholar

[12]Haimson, B., Chang, C., 2005. Brittle fracture in two crystalline rocks under true triaxial compressive stresses. Geol Soc Special Pub, [240], 47–59.HaimsonB.ChangC.2005Brittle fracture in two crystalline rocks under true triaxial compressive stressesGeol Soc Special Pub240475910.1144/GSL.SP.2005.240.01.05Search in Google Scholar

[13]Kaiser, M.J., 2009. Modeling the time and cost to drill an offshore well, Energy, 34, 1097–1112.KaiserM.J.2009Modeling the time and cost to drill an offshore wellEnergy341097111210.1016/j.energy.2009.02.017Search in Google Scholar

[14]Liu, X., Zeng, W., Liang, L., Lei, M., 2016. Wellbore stability analysis for horizontal wells in shale formations. J. Nat. Gas Sci. Eng. 31, 1–8. https://doi.org/10.1016/j.jngse.2016.02.061.LiuX.ZengW.LiangL.LeiM.2016Wellbore stability analysis for horizontal wells in shale formationsJ. Nat. Gas Sci. Eng3118https://doi.org/10.1016/j.jngse.2016.02.061.10.1016/j.jngse.2016.02.061Search in Google Scholar

[15]Martemyanov, A., Lukin, S., Ovcharenko, Y., Zhukov, V., Andrianov Y., Vereshchagin S., Ereemev A., Konchenko, A., Tatur, O., Yuferova, A., 2017. Analytic Modeling for Wellbore Stability Analysis, Procedia Struct. Integrity. Vol. 6, 292–300. https://doi.org/10.1016/j.prostr.2017.11.045MartemyanovA.LukinS.OvcharenkoY.ZhukovV.AndrianovY.VereshchaginS.EreemevA.KonchenkoA.TaturO.YuferovaA.2017Analytic Modeling for Wellbore Stability AnalysisProcedia Struct. Integrity6292300https://doi.org/10.1016/j.prostr.2017.11.04510.1016/j.prostr.2017.11.045Search in Google Scholar

[16]Maury, V. M., Sauzay, J. M. G., 1987. Borehole instability: Case histories, rock mechanics approach and results. In: Proc SPE/IADC Drilling Conf, New Orleans, March 15–18. SPE 16051.MauryV. M.SauzayJ. M. G.1987Borehole instability: Case histories, rock mechanics approach and resultsIn:Proc SPE/IADC Drilling Conf, New OrleansMarch 15–18SPE 16051.10.2118/16051-MSSearch in Google Scholar

[17]McLean, M., Addis, M., 1990. Wellbore stability analysis: a review of current methods of analysis & their field application. In: Proc IADC/SPE Drilling Conf, Houston, Feb. 27–Mar 2. SPE 19941.McLeanM.AddisM.1990Wellbore stability analysis: a review of current methods of analysis & their field applicationIn:Proc IADC/SPE Drilling Conf, HoustonFeb. 27–Mar 2SPE 19941.10.2118/19941-MSSearch in Google Scholar

[18]Mitchell, R.F., Miska, S.Z., 2011. FUNDAMENTALS OF DRILLING ENGINEERING, SPE TEXTBOOK SERIES, Vol 12, pp. 61–79.MitchellR.F.MiskaS.Z.2011FUNDAMENTALS OF DRILLING ENGINEERINGSPE TEXTBOOK SERIES12617910.2118/9781555632076Search in Google Scholar

[19]Mody, F.K., Hale, A.H., 1993. “Borehole stability model to couple the mechanics and chemistry of drilling fluid shale interaction”. J. Pet Tech. 45, 1093–1101.ModyF.K.HaleA.H.1993“Borehole stability model to couple the mechanics and chemistry of drilling fluid shale interaction”J. Pet Tech451093110110.2118/25728-PASearch in Google Scholar

[20]Morgan, S., Einstein, H., 2014. The effect of bedding plane orientation on crack propagation and coalescence in shale. In: 48th US Rock Mechanics/Geomechanics Symposium. ARMA.MorganS.EinsteinH.2014The effect of bedding plane orientation on crack propagation and coalescence in shaleIn:48th US Rock Mechanics/Geomechanics SymposiumARMA.Search in Google Scholar

[21]Mohammad, E.Z., 2012. Mechanical and physical-chemical aspects of wellbore stability during drilling operations. J. Petrol. Sci. Eng., 82–83: 120–124.MohammadE.Z.2012Mechanical and physical-chemical aspects of wellbore stability during drilling operationsJ. Petrol. Sci. Eng82–8312012410.1016/j.petrol.2012.01.006Search in Google Scholar

[22]Nick, S., 2019. World Bank: Global gas flaring up 3% in 2018. Oil and Gas Journal. www.ogj.com.NickS.2019World Bank: Global gas flaring up 3% in 2018Oil and Gas Journalwww.ogj.com.Search in Google Scholar

[23]Shi, X., Yang, X., Meng, Y., Li, G., 2016. Wellbore Stability Analysis in Chemically Active Shale Formations, Thermal Science, 20 (3), 911–917.ShiX.YangX.MengY.LiG.2016Wellbore Stability Analysis in Chemically Active Shale FormationsThermal Science20391191710.2298/TSCI16S3911SSearch in Google Scholar

[24]Song, I., Haimson, B. C., 1997. Polyaxial strength criteria and their use in estimating in situ stress magnitudes from borehole breakout dimensions. IJRMMS, 34 [3–4].SongI.HaimsonB. C.1997Polyaxial strength criteria and their use in estimating in situ stress magnitudes from borehole breakout dimensionsIJRMMS343–410.1016/S1365-1609(97)00240-2Search in Google Scholar

[25]Zhang, Q., Wenyu, J., Xiangyu, F., 2015. A review of the shale wellbore stability mechanism based on mechanical-chemical coupling theories, Petroleum 1(2015) 91–96.ZhangQ.WenyuJ.XiangyuF.2015A review of the shale wellbore stability mechanism based on mechanical-chemical coupling theoriesPetroleum1(2015)919610.1016/j.petlm.2015.06.005Search in Google Scholar

[26]Zhou, J., He, S., Tang, M., Huang, Z., Chen, Y., Chi, J., Zhu, Y., Yuan, P., 2018. Analysis of wellbore stability considering the effects of bedding planes and anisotropic seepage during drilling horizontal wells in the laminated formation, JPSE, 170 (2018), 507–524.ZhouJ.HeS.TangM.HuangZ.ChenY.ChiJ.ZhuY.YuanP.2018Analysis of wellbore stability considering the effects of bedding planes and anisotropic seepage during drilling horizontal wells in the laminated formationJPSE170(2018)50752410.1016/j.petrol.2018.06.052Search in Google Scholar

[27]Zhou, S. H., Hillis, R. R., Sandiford, M., 1996. On the mechanical stability of inclined wellbores. SPE Drilling Comp, 11 [2], 67–73.ZhouS. H.HillisR. R.SandifordM.1996On the mechanical stability of inclined wellboresSPE Drilling Comp112677310.2118/28176-PASearch in Google Scholar