Accesso libero

Effect of randomly distributed polypropylene fiber reinforcement on the shear behavior of sandy soil

Mehdi Missoum Benziane

Mehdi Missoum Benziane

preparation, Laboratory of Materials Science and Environment (LMSE), Hassiba Benbouali University of Chlef, Algéria. Laboratory of Geomaterials, Hassiba Benbouali University of ChlefChlef, Algéria
Cerca questo autore su
Sciendo|Google Scholar
Benziane, Mehdi Missoum
, 
Noureddine Della

Noureddine Della

Universite Hassiba Benbouali de ChlefChlef, Algeria
Cerca questo autore su
Sciendo|Google Scholar
Della, Noureddine
, 
Sidali Denine

Sidali Denine

Laboratory of Materials Science and Environment (LMSE), Hassiba Benbouali University of ChlefChlef, Algéria
Cerca questo autore su
Sciendo|Google Scholar
Denine, Sidali
, 
Sedat Sert

Sedat Sert

Faculty of Engineering, Department of Civil Engineering, Geotechnical Laboratory, Sakarya UniversitySakarya, Turkey
Cerca questo autore su
Sciendo|Google Scholar
Sert, Sedat
 e 
Said Nouri

Said Nouri

Laboratory of Structures, Geotechnics and Risks, Hassiba Benbouali University of ChlefChlef, Algeria
Cerca questo autore su
Sciendo|Google Scholar
Nouri, Said
  
30 set 2019
Effect of randomly distributed polypropylene fiber reinforcement on the shear behavior of sandy soil's Cover Image
INFORMAZIONI SU QUESTO ARTICOLO
Articolo precedente
Articolo Successivo
Cita
Scarica la copertina
Categoria dell'articolo: Research Article
Pubblicato online: 30 set 2019
Pagine: 151 - 159
Ricevuto: 06 feb 2019
Accettato: 27 mag 2019
DOI: https://doi.org/10.2478/sgem-2019-0014
Parole chiave
© 2019 Mehdi Missoum Benziane et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Figure 1

Localization of the liquefaction phenomenon in the Chlef valley during the earthquake of October 1980[16]
Localization of the liquefaction phenomenon in the Chlef valley during the earthquake of October 1980[16]

Figure 2

Grain size distribution curve of the Chlef sand.
Grain size distribution curve of the Chlef sand.

Figure 3

Monofilament polypropylenefiber.
Monofilament polypropylenefiber.

Figure 4

Sample preparation.
Sample preparation.

Figure 5

View of the direct shear box apparatus.
View of the direct shear box apparatus.

Figure 6

Effect of fiber content on shear behavior, normal stress of 200kPa and a relative density Dr = 30 %: (a)variation of the shear strength versus horizontal displacement,(b)variation of vertical displacement versus horizontal displacement, (c)intrinsic curves
Effect of fiber content on shear behavior, normal stress of 200kPa and a relative density Dr = 30 %: (a)variation of the shear strength versus horizontal displacement,(b)variation of vertical displacement versus horizontal displacement, (c)intrinsic curves

Figure 7

Effect of fibercontent on shear behavior, normal stress of 200kPa and a relative density Dr = 50 %: (a)variation of the shear strength versus horizontal displacement,(b)variation of vertical displacement versus horizontal displacement, (c)intrinsic curves
Effect of fibercontent on shear behavior, normal stress of 200kPa and a relative density Dr = 50 %: (a)variation of the shear strength versus horizontal displacement,(b)variation of vertical displacement versus horizontal displacement, (c)intrinsic curves

Figure 8

Effect of fibercontent on shear behavior, normal stress of 200kPa and a relative density Dr = 80 %: (a)variation of the shear strength versus horizontal displacement,(b)variation of vertical displacement versus horizontal displacement, (c)intrinsic curves
Effect of fibercontent on shear behavior, normal stress of 200kPa and a relative density Dr = 80 %: (a)variation of the shear strength versus horizontal displacement,(b)variation of vertical displacement versus horizontal displacement, (c)intrinsic curves

Figure 9

Effect of relative density and normal stress on the shear strength of fiber reinforced sand with a fiber content Fc=0.75%.
Effect of relative density and normal stress on the shear strength of fiber reinforced sand with a fiber content Fc=0.75%.

Experimental program_

Relative density, Dr(%)Fiber content, Fc(%)Normal stress, 6n(kPa)
300,0.25, 0.5and 0.7550, 100 and 200
500, 0.25, 0.5and 0.7550, 100 and 200
800, 0.25, 0.5and 0.7550, 100 and 200

Engineering properties of Chlef sand_

Sand PropertiesStandard test specificationsValue
Medium grain size, D50 (mm)ASTM D-4220.40
Maximum diameter, Dmax(mm)ASTM D-4222.00
Coefficient of uniformity, Cu (.)ASTM D-4222.227
Coefficient of curvature, Cc (.)ASTM D-4220.891
Mean specific gravity, Gs(.)ASTM D854-022.665
Maximum void ratio, emax(.)ASTM D4253-000.85
Minimum void ratio, emin(.)ASTM D4254-000.56

Physical and mechanical properties of polypropylene fiber_

Specific gravityLength (mm)Diameter (μm)Tensile strength (MPa)Young modulus (GPa)
0.911232600–7003.0–3.5
Lingua:
Inglese
Frequenza di pubblicazione:
4 volte all'anno
Argomenti della rivista:
Geoscienze, Geoscienze, altro, Scienze materiali, Compositi, Materiali porovati, Fisica, Meccanica e dinamica dei fluidi
Feed RSS della rivista