Login
Registrati
Reimposta password
Pubblica & Distribuisci
Soluzioni Editoriali
Soluzioni di Distribuzione
Temi
Architettura e design
Arti
Business e Economia
Chimica
Chimica industriale
Farmacia
Filosofia
Fisica
Geoscienze
Ingegneria
Interesse generale
Legge
Letteratura
Linguistica e semiotica
Matematica
Medicina
Musica
Scienze bibliotecarie e dell'informazione, studi library
Scienze dei materiali
Scienze della vita
Scienze informatiche
Scienze sociali
Sport e tempo libero
Storia
Studi classici e del Vicino Oriente antico
Studi culturali
Studi ebraici
Teologia e religione
Pubblicazioni
Riviste
Libri
Atti
Editori
Blog
Contatti
Cerca
EUR
USD
GBP
Italiano
English
Deutsch
Polski
Español
Français
Italiano
Carrello
Home
Riviste
Studia Geotechnica et Mechanica
Volume 40 (2018): Numero 4 (December 2018)
Accesso libero
Stability of Road Earth Structures in the Complex And Complicated Ground Conditions
Andrzej Batog
Andrzej Batog
e
Elżbieta Stilger-Szydło
Elżbieta Stilger-Szydło
| 26 set 2018
Studia Geotechnica et Mechanica
Volume 40 (2018): Numero 4 (December 2018)
INFORMAZIONI SU QUESTO ARTICOLO
Articolo precedente
Articolo Successivo
Sommario
Articolo
Immagini e tabelle
Bibliografia
Autori
Articoli in questo Numero
Anteprima
PDF
Cita
CONDIVIDI
Article Category:
Research Article
Pubblicato online:
26 set 2018
Pagine:
300 - 312
Ricevuto:
18 ott 2018
Accettato:
31 ott 2018
DOI:
https://doi.org/10.2478/sgem-2018-0028
Parole chiave
slope stability
,
road embankments
,
transport engineering
,
soft soils
© 2018 Andrzej Batog, Elżbieta Stilger-Szydło, published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.
Figure 1
Scheme of the Bishop method (simplified).
Figure 2
Bolków ring road, cross section of km 0 + 150.02: stability according to EC7 of embankment made of non-cohesive soil.
Figure 3
Bolków ring road, cross section of km 0 + 150.02: stability according to EC7 of embankment made of cohesive soil, along with the substrate
Figure 4
Cross section of km 0 + 796.18 – computational scheme.
Figure 5
Cross section of km 0 + 796.18 – stability calculations (distribution of displacements) of the embankment made of cohesive soilg = 20.5 kN/m3, ϕ = 17°, c = 22 kPa, according to Eurocode 7 (Fmin = 1.17 >Freq = 1.0)
Figure 6
Computational scheme.
Figure 7
Potential mechanism of the loss of stability – green-blue block in the right slope..
Figure 8
System of ground layers. Phase 1 of calculations – state before performance of a road excavation.
Figure 9
System of ground layers. Phase 2 of calculations – state with road load after the performance of a road excavation
Figure 10
Phase 2 of calculations – stability analysis of the upper part of the slope above the road excavation, Fmin = 1.88.
Figure 11
Phase 2 calculations – stability analysis of lower part of the slope below the road excavation Fmin = 2.01.
Figure 12
Current profile of the road O8 slope at km 0 + 105.00.
Figure 13
Designed slope profile of the road O8 excavation in the cross section of km 0 + 105.00
Figure 14
Results of stability calculations of the slope Fmin = 1.40.
Values of partial factors recommended for use in the analysis of slope stability
Partial factors
Design approach
1
2
3
Combination 1
Combination 2
A
γ
G
1.35
1.0
1.35
1.0
*
γ
Gfav
1.0
1.0
1.0
1.0
γ
Q
1.5
1.3
1.5
1.3
*
M
γ
tanφ '
1.0
1.25
1.0
1.25
γ
c
'
1.0
1.25
1.0
1.25
γ
γ
1.0
1.0
1.0
1.0
R
γ
R
;
e
1.0
1.0
1.1
1.0