Methodology for Measuring Forces in Motorcycle Suspension Using a System Based on Analogue Potentiometers

[1] Schiehlen, W. “Multibody Systems Handbook” (1st ed.). Berlin, 1990. ISBN 978-364-2509-957. Search in Google Scholar

[2] Cossalter, V. “Motorcycle dynamics” (2nd ed.). USA, 2006. ISBN 978-1-4303-0861-4. Search in Google Scholar

[3] Novotny, P. “Pocitacove simulace v automobilovem prumyslu II: Zaklady numerickych metod I”, Brno, 2019. (in Czech). Search in Google Scholar

[4] Schauer, P. “Vyzkum, Dynamika vozidel”, SADT, UADI FSI VUT. Ustav automobilniho a dopravniho inzenyrstvi [online]. Brno, 2020. Available at: http://www.iae.fme.vutbr.cz/vyzkum-dynamika-vozidel-sadt, (in Czech). Search in Google Scholar

[5] Segeres, J. “Analysis Techniques for Racecar Data Acquisition” (2nd ed.). Warrendale, 2014. ISBN 978-0-7680-6459-9. Search in Google Scholar

[6] Azodo, A. “Survey on Road-Tyre Contact Patch Pattern and Wear Related Aspects”, Strojnícky časopis – Journal of Mechanical Engineering. 67 (2), pp. 5 – 12, 2017. DOI: 10.1515/scjme-2017-0013 Search in Google Scholar

[7] Öhlins. Öhlins Front Fork Superbike FGR 300. “Owner’s Manual/ Spare Parts List/ Workshop Manual”, 2012. Retrieved from https://www.ohlins.eu/en/products/motorcycle/fgr-300--4175/ Search in Google Scholar

[8] Capriglione, D., Carratù, M., Liguori, C., Paciello, V., Sommella. A. “Soft Stroke Sensor for Motorcycle Rear Suspension”, Measurement 106, pp. 46 – 52, 2017. DOI: 10.1016/j.measurement.2017.04.011 Search in Google Scholar

[9] Misa, J. “Adaptive control of magnetorheological dampers”, Ms Thesis, Institute of Automotive Engineering, Brno University of Technology, Brno, Czech Republic, 2020. Search in Google Scholar

[10] Dixon, J. C. “The Shock Absorber Handbook” (2nd ed.). 2007. ISBN 0-7680-00-0-5. Search in Google Scholar

[11] Ragulik, J., Sivcak, M. “Modeling of the Controlled Air Spring”, Strojnícky časopis – Journal of Mechanical Engineering 69 (3), pp. 107 – 112, 2019. DOI: 10.2478/scjme-2019-0037 Search in Google Scholar

[12] Vebil, Y. “A Closed-Form Buckling Formula for Open-Coiled and Properly Supported Circular-Bar Helical Springs”, Strojnícky časopis – Journal of Mechanical Engineering 68 (3), pp. 33 – 48, 2018. DOI: 10.2478/scjme-2018-0025 Search in Google Scholar

[13] Reece, J., Shinedling, M., Guzman - Magana, A. “Dodge Viper ACR The Aerodynamics of a Street-legal Race Car”, ATZ Worldwide 119, pp. 36 – 41, 2017. DOI: 10.1007/s38311-016-0185-3 Search in Google Scholar

[14] Marchesin, F. P., Barbosa, r. S., Gadola M., Chindamo D. “High downforce race car vertical dynamics: aerodynamic index”, Vehicle System Dynamics 56 (8), pp. 1269 – 1288, 2018. DOI: 10.1080/00423114.2017.1413196 Search in Google Scholar

[15] Fédération Internationale de l’Automobile, “FIA F3 Technical regulations”, FIA F3 REGULATIONS, 2023. Retrieved from https://www.fia.com/regulation/category/106 Search in Google Scholar

[16] Fédération Internationale de Motocyclisme. Technical regulations. “FIM MOTO3™ JUNIOR WORLD CHAMPIONSHIP REGULATIONS”, 2021. Retrieved from https://www.fim-moto.com/en/documents Search in Google Scholar

[17] Barethiye, V., Pohit, G., Mitra, A. “A combined nonlinear and hysteresis model of shock absorber for quarter car simulation on the basis of experimental data”, Engineering Science and Technology, an International Journal 20, pp. 1610 – 1622, 2017. ISSN 2215-0986. Search in Google Scholar