[
[1] Moi Subhas, Ch., Ramesh, R., Kumar, P. P., Asish, B. “Analysis of Impact Behaviour of TIG Weldment by Using Hybrid RSM and CSO”, Strojnícky časopis – Journal of Mechanical Engineering 69 (4), pp. 105 – 114, 2019. DOI: 10.2478/scjme-2019-004610.2478/scjme-2019-0046
]Search in Google Scholar
[
[2] Srinivasa Rao, M., Tangudu S. S., Perumalla, S., Uppda, B. R., Yandra, Ch., Kambhampati, K. “Effect of TIG and FSW Welding Processes on Mechanical Properties of Al-4.2Mg-0.6Mn-0.4Sc-0.1Zr Alloy”, Strojnícky časopis – Journal of Mechanical Engineering 71 (2), pp. 299 – 304, 2021. DOI: 10.2478/scjme-2021-003610.2478/scjme-2021-0036
]Search in Google Scholar
[
[3] Kovalchuk, M., Iurzhenko, M., Demchenko, V., Senchenkov, I. “The Investigation of the Welding Process of Different-Type Polyethylenes”, In: Pogrebnjak, A., Novosad, V. (eds) Advances in Thin Films, Nanostructured Materials, and Coatings. Lecture Notes in Mechanical Engineering. Springer, Singapore, 2019. DOI: 10.1007/978-981-13-6133-3_2310.1007/978-981-13-6133-3_23
]Search in Google Scholar
[
[4] Skriko, T., Ahola, A. & Björk, T. “Overview on the digitized production of welded steel structures”, Welding in the World, 2022. DOI: 10.1007/s40194-021-01224-x10.1007/s40194-021-01224-x
]Search in Google Scholar
[
[5] Klochkov, I., Poklaytsky, A., Motrunich, S. “Fatigue behavior of high strength Al-Cu-Mg and Al-Cu-Li alloys joints obtained by fusion and solid state welding technologies”, Journal of Theoretical and Applied Mechanics 49(2), pp. 179 – 189, 2019. DOI: 10.7546/JTAM.49.19.02.0710.7546/JTAM.49.19.02.07
]Search in Google Scholar
[
[6] Poklyatsky, A. G., Knysh, V. V., Klochkov, I. N., Motrunich, S. I. “Features and advantages of the process of friction stir welding of butt joints of sheet aluminum-lithium alloys”, The Paton Welding Journal 5 – 6, pp. 86 – 90, 2016. DOI: 10.15407/as2016.06.1510.15407/as2016.06.15
]Search in Google Scholar
[
[7] Hobbacher, A. F. “Recommendations for fatigue design of welded joints and components”, IIW Collection, 2nd Edition, series Editor Cècile Mayer, Springer International Publishing, Villepinte, France, 2016. DOI: 10.1007/978-3-319-23757-210.1007/978-3-319-23757-2
]Search in Google Scholar
[
[8] Goyal, R., El-Zein, M., Glinka, G. “A robust stress analysis method for fatigue life prediction of welded structures”, Welding in the World 60(2), pp. 299 – 314, 2016. DOI: 10.1007/s40194-016-0295-y10.1007/s40194-016-0295-y
]Search in Google Scholar
[
[9] Tkach, P. N., Moltasov, A. W. “Development of Methods for the Assessment of Stresses in Welded Structure Elements: Part 2. The Latest Methods”, Bulletin of the Institute of Welding 61(5), pp. 123 – 133, 2017. DOI: 10.17729/ebis.2017.5/1410.17729/ebis.2017.5/14
]Search in Google Scholar
[
[10] Moltasov, A. V. “A Study of the Stress State in Stress Concentration Zones under Tension of an Asymmetrically Reinforced Butt-Welded Joint”, Strength of Materials 49(5), pp. 718 – 725, 2017. DOI: 10.1007/s11223-017-9917-x10.1007/s11223-017-9917-x
]Search in Google Scholar
[
[11] Tsumarev, Yu. A. “Effect of off-centre tensile loading on the stress state of butt-welded joints”, Welding International 25 (11), pp. 872 – 875, 2011. DOI: 10.1080/09507116.2011.58142610.1080/09507116.2011.581426
]Search in Google Scholar
[
[12] Lukianenko, A., Labur, T. M., Pokliatskyi, A. G., Motrunich, S., Bajic, D. “Investigation of fatigue strength and norms of emission of harmful substances in the air during MIG and TIG welding of 1460 aluminum-lithium alloy”, FME Transactions 47(3), pp. 608 – 612, 2019. DOI: 10.5937/fmet1903608L10.5937/fmet1903608L
]Search in Google Scholar
[
[13] Moltasov, A. V. “Application of the method of nonplanar sections to determine stresses in the zones of concentration caused by weld reinforcement in butt-welded joints”, Strength of Materials 45(1), pp. 116 – 122, 2013. DOI: 10.1007%2Fs11223-013-9438-110.1007/s11223-013-9438-1
]Search in Google Scholar
[
[14] Poklyatsky, A. G., Klochkov, I. N., Motrunich, S. I. “Some advantages of butt joints of thin wrought aluminum alloys AMg5M and AMg6M produced by FSW, compared to TIG-welded joints”, The Paton Welding Journal 7, pp. 16 – 21, 2015. DOI: 10.15407/tpwj2015.07.0310.15407/tpwj2015.07.03
]Search in Google Scholar
[
[15] Moltasov, A. V. “Approximate calculation of radius of weld transition to base metal of welded butt joint according to normalized parameters”, The Paton Welding Journal 9, pp. 50 – 52, 2017. DOI: 10.15407/tpwj2017.09.0910.15407/tpwj2017.09.09
]Search in Google Scholar
[
[16] Moltasov, A. V., Klochkov, I. N. “Calculation of the radius of transition of the weld to base metal of aluminum alloys welded joints”, The Paton Welding Journal 9, pp. 40 – 42, 2019. DOI: 10.15407/tpwj2019.09.0710.15407/tpwj2019.09.07
]Search in Google Scholar
[
[17] Moltasov, A. V. “Stressed State of a Butt-Welded Joint with Regard for Displacements of the Centers of Inertia”, Materials Science 55 (3), pp. 358 – 366, 2019. DOI: 10.1007/s11003-019-00310-210.1007/s11003-019-00310-2
]Search in Google Scholar
[
[18] Herrera, H. H., Espinosa, R. G., Eras, J. J. C., Morejon, M. B. “Stress in butt welded joints of open profiles under torsion”, Engineering. Chilean Engineering Magazine, 23 (4), pp. 638 – 646, 2015. DOI: 10.4067/S0718-33052015000400014 (in Spanish)10.4067/S0718-33052015000400014
]Search in Google Scholar
