<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The subject of this article around two studies, including experimental and numerical, aiming to know the efficiency of the repair of a composite plate notched (V-shape) and cracked by composite patches of different (types and shapes) . The experimental study to find out which composite materials and shapes are resistant to fracture and notch, We used the finite element method (ABAQUS) for the numerical study to follow the variation of the damaged area ratio D<sub>R</sub>, the stress intensity factor SIF and the stress distribution as a function of the crack size for located the most effective shape and type patch in repairing cracks and notch. From the results found we can deduce that the best type of patch used is Boron / epoxy and the full shape is the most efficient and resists structural failure, this is confirmed by the experimental test.</p>
</abstract>

The subject of this article around two studies, including experimental and numerical, aiming to know the efficiency of the repair of a composite plate notched (V-shape) and cracked by composite patches of different (types and shapes) . The experimental study to find out which composite materials and shapes are resistant to fracture and notch, We used the finite element method (ABAQUS) for the numerical study to follow the variation of the damaged area ratio DR, the stress intensity factor SIF and the stress distribution as a function of the crack size for located the most effective shape and type patch in repairing cracks and notch. From the results found we can deduce that the best type of patch used is Boron / epoxy and the full shape is the most efficient and resists structural failure, this is confirmed by the experimental test.

Experimental and Numerical Study on the Efficiency of the Repair of Composite Structures Cracked and V-Notched By Different Types and Shapes of Composite Material Patch

Faculty of Engineering and Technology, LAPS Laboratory of Aeronautics and propulsive systems

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The subject of this article around two studies, including experimental and numerical, aiming to know the efficiency of the repair of a composite plate notched...

Experimental and Numerical Study on the Efficiency of the Repair of Composite Structures Cracked and V-Notched By Different Types and Shapes of Composite Material Patch

Pubblicato online: 09 mag 2022

Pagine: 1 - 14

DOI: https://doi.org/10.2478/scjme-2022-0001

Parole chiave
Finite element method (FEM), repair composite, Stress intensity factor (SIF), the damaged area ratio (D), Von Mises Stress, laminate

© 2022 Berrahou Mohamed et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Experimental and Numerical Study on the Efficiency of the Repair of Composite Structures Cracked and V-Notched By Different Types and Shapes of Composite Material Patch

Pubblicato online: 09 mag 2022

Pagine: 1 - 14

DOI: https://doi.org/10.2478/scjme-2022-0001

Parole chiaveFinite element method (FEM), repair composite, Stress intensity factor (SIF), the damaged area ratio (D), Von Mises Stress, laminate

© 2022 Berrahou Mohamed et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
Finite element method (FEM), repair composite, Stress intensity factor (SIF), the damaged area ratio (D), Von Mises Stress, laminate